diff mbox series

[v3,11/11] spi: opportunistically skip ctlr->cur_msg_completion

Message ID 20220621061234.3626638-12-david@protonic.nl
State Accepted
Commit dc3029056b02414c29b6627e3dd7b16624725ae9
Headers show
Series [v3,01/11] spi: Move ctlr->cur_msg_prepared to struct spi_message | expand

Commit Message

David Jander June 21, 2022, 6:12 a.m. UTC
There are only a few drivers that do not call
spi_finalize_current_message() in the context of transfer_one_message(),
and even for those cases the completion ctlr->cur_msg_completion is not
needed always. The calls to complete() and wait_for_completion() each
take a spin-lock, which is costly. This patch makes it possible to avoid
those calls in the big majority of cases, by introducing two flags that
with the help of ordering via barriers can avoid using the completion
safely. In case of a race with the context calling
spi_finalize_current_message(), the scheme errs on the safe side and takes
the completion.
The impact of this patch is worth the effort: On a i.MX8MM SoC, the time
the SPI bus is idle between two consecutive calls to spi_sync(), is
reduced from 19.6us to 16.8us... roughly 15%.

Signed-off-by: David Jander <david@protonic.nl>
---
 drivers/spi/spi.c       | 27 +++++++++++++++++++++++++--
 include/linux/spi/spi.h |  8 ++++++++
 2 files changed, 33 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index db08cb868652..ef37f043fd17 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1613,14 +1613,34 @@  static int __spi_pump_transfer_message(struct spi_controller *ctlr,
 		}
 	}
 
+	/*
+	 * Drivers implementation of transfer_one_message() must arrange for
+	 * spi_finalize_current_message() to get called. Most drivers will do
+	 * this in the calling context, but some don't. For those cases, a
+	 * completion is used to guarantee that this function does not return
+	 * until spi_finalize_current_message() is done accessing
+	 * ctlr->cur_msg.
+	 * Use of the following two flags enable to opportunistically skip the
+	 * use of the completion since its use involves expensive spin locks.
+	 * In case of a race with the context that calls
+	 * spi_finalize_current_message() the completion will always be used,
+	 * due to strict ordering of these flags using barriers.
+	 */
+	WRITE_ONCE(ctlr->cur_msg_incomplete, true);
+	WRITE_ONCE(ctlr->cur_msg_need_completion, false);
 	reinit_completion(&ctlr->cur_msg_completion);
+	smp_wmb(); /* make these available to spi_finalize_current_message */
+
 	ret = ctlr->transfer_one_message(ctlr, msg);
 	if (ret) {
 		dev_err(&ctlr->dev,
 			"failed to transfer one message from queue\n");
 		return ret;
 	} else {
-		wait_for_completion(&ctlr->cur_msg_completion);
+		WRITE_ONCE(ctlr->cur_msg_need_completion, true);
+		smp_mb(); /* see spi_finalize_current_message()... */
+		if (READ_ONCE(ctlr->cur_msg_incomplete))
+			wait_for_completion(&ctlr->cur_msg_completion);
 	}
 
 	return 0;
@@ -1942,7 +1962,10 @@  void spi_finalize_current_message(struct spi_controller *ctlr)
 
 	mesg->prepared = false;
 
-	complete(&ctlr->cur_msg_completion);
+	WRITE_ONCE(ctlr->cur_msg_incomplete, false);
+	smp_mb(); /* See __spi_pump_transfer_message()... */
+	if (READ_ONCE(ctlr->cur_msg_need_completion))
+		complete(&ctlr->cur_msg_completion);
 
 	trace_spi_message_done(mesg);
 
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index c56e0d240a58..eb0d316e3c36 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -385,6 +385,12 @@  extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  * @queue: message queue
  * @cur_msg: the currently in-flight message
  * @cur_msg_completion: a completion for the current in-flight message
+ * @cur_msg_incomplete: Flag used internally to opportunistically skip
+ *	the @cur_msg_completion. This flag is used to check if the driver has
+ *	already called spi_finalize_current_message().
+ * @cur_msg_need_completion: Flag used internally to opportunistically skip
+ *	the @cur_msg_completion. This flag is used to signal the context that
+ *	is running spi_finalize_current_message() that it needs to complete()
  * @cur_msg_mapped: message has been mapped for DMA
  * @last_cs: the last chip_select that is recorded by set_cs, -1 on non chip
  *           selected
@@ -617,6 +623,8 @@  struct spi_controller {
 	struct list_head		queue;
 	struct spi_message		*cur_msg;
 	struct completion               cur_msg_completion;
+	bool				cur_msg_incomplete;
+	bool				cur_msg_need_completion;
 	bool				busy;
 	bool				running;
 	bool				rt;