diff mbox series

[-next,14/25] spi: lantiq-ssc: Use helper function devm_clk_get_enabled()

Message ID 20230822131237.1022815-15-lizetao1@huawei.com
State Superseded
Headers show
Series spi: Use devm_clk_get_*() helper function to simplify the drivers. | expand

Commit Message

Li Zetao Aug. 22, 2023, 1:12 p.m. UTC 
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
replaced by devm_clk_get_enabled() when driver enables (and possibly
prepares) the clocks for the whole lifetime of the device. Moreover, it is
no longer necessary to unprepare and disable the clocks explicitly.

Signed-off-by: Li Zetao <lizetao1@huawei.com>
---
 drivers/spi/spi-lantiq-ssc.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-lantiq-ssc.c b/drivers/spi/spi-lantiq-ssc.c
index 938e9e577e4f..18a46569ba46 100644
--- a/drivers/spi/spi-lantiq-ssc.c
+++ b/drivers/spi/spi-lantiq-ssc.c
@@ -932,14 +932,11 @@  static int lantiq_ssc_probe(struct platform_device *pdev)
 	if (err)
 		goto err_host_put;
 
-	spi->spi_clk = devm_clk_get(dev, "gate");
+	spi->spi_clk = devm_clk_get_enabled(dev, "gate");
 	if (IS_ERR(spi->spi_clk)) {
 		err = PTR_ERR(spi->spi_clk);
 		goto err_host_put;
 	}
-	err = clk_prepare_enable(spi->spi_clk);
-	if (err)
-		goto err_host_put;
 
 	/*
 	 * Use the old clk_get_fpi() function on Lantiq platform, till it
@@ -952,7 +949,7 @@  static int lantiq_ssc_probe(struct platform_device *pdev)
 #endif
 	if (IS_ERR(spi->fpi_clk)) {
 		err = PTR_ERR(spi->fpi_clk);
-		goto err_clk_disable;
+		goto err_host_put;
 	}
 
 	num_cs = 8;
@@ -1010,8 +1007,6 @@  static int lantiq_ssc_probe(struct platform_device *pdev)
 	destroy_workqueue(spi->wq);
 err_clk_put:
 	clk_put(spi->fpi_clk);
-err_clk_disable:
-	clk_disable_unprepare(spi->spi_clk);
 err_host_put:
 	spi_controller_put(host);
 
@@ -1029,7 +1024,6 @@  static void lantiq_ssc_remove(struct platform_device *pdev)
 	hw_enter_config_mode(spi);
 
 	destroy_workqueue(spi->wq);
-	clk_disable_unprepare(spi->spi_clk);
 	clk_put(spi->fpi_clk);
 }