From patchwork Sun Mar 17 19:37:12 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ayush Singh X-Patchwork-Id: 780898 Received: from mail-ot1-f43.google.com (mail-ot1-f43.google.com [209.85.210.43]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 9360F2134A; Sun, 17 Mar 2024 19:38:37 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.210.43 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1710704320; cv=none; b=AIRom+1ENG+KF2l+z9L7d2Rm8tEdos8+qIomoY11EHZ605NKW5+8kRUbUiuBelfN/5tZJvqkmM2ojZfpn86kXCL6zUOQ4OlFWEzYiBGmy37uxdqRMWgRUog7UUMD1VAZY3LbnuL1DAIgziaWdYYiF5OIXm2GkCdDfZWFtkk4yd0= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1710704320; c=relaxed/simple; bh=XoSg38IRIP3vuOnHVR6tVgbooonWmcwUrJ3fe5/rHdk=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=oIQ6UinwPOYqFFxXKZgQi/vD5c6XkNdn/AnBrvOun6mMY0hS3GvjWwxFOPJeOTZ9RwKv2Q7vE0EGoxx1XHgJnvIBNLSPXP9u+FLyMhZUiG/ehiDcqYJPkYprkoogvIYO6Jl5JO/iavXIMeLuM/cn9i+xB5aAR/5h4Iahz307IOk= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=GuNdlqMw; arc=none smtp.client-ip=209.85.210.43 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="GuNdlqMw" Received: by mail-ot1-f43.google.com with SMTP id 46e09a7af769-6e125818649so1419218a34.1; Sun, 17 Mar 2024 12:38:37 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1710704316; x=1711309116; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=JIjZbYAaC7Szl64I9+yOIL6zkvga0zthWgnNY93d+E4=; b=GuNdlqMw49dwj2TSfkwCR/RLoAW1uDfXXFJdkth7lUvTtid6/0ybjlzt6XScFtwTNI +Ns1Uji9Cho2wuhhNY1MZwh+NYvP7o0MGrSh8ACxiN7wHpw0UT3EG4uckXuYXV0uRg9X m+0bcpRTpAZgeCcBwjt5ugttB65PmuKfxdMxc2mQWsp2osP0PaWprrVEAqRKhmzo+EAa K/hElXoeSP0m8k1BsDOrPmRnZM8cgWo4SKOqEqrnMfaPDclhCPVrhQ8dp/Qo6eMsCzdh o6JkAxZvbdRou6wjzYDXOWlzmrPV3d4xB7V5R097kgeZGOtA+1xx3CgGyBQVnWryYGW1 a+Xw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1710704316; x=1711309116; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=JIjZbYAaC7Szl64I9+yOIL6zkvga0zthWgnNY93d+E4=; b=cFrMzas451lWof9HT9nQVcS6Vq6pYdahz12RzoIKseciP09o7JBluq3WSnXJUpWOm/ iT6GmUJZB6XOOXG9vqAs3KNQ79Zhta8tqxUQisTrqeXtpKrMwT6Zsw9FsFz5pIMHqWgT fkskapoOwqwUTLsqx64d5d5fdALnHPdkzekqPYyclVMs+Ql2fwRDJ9ne+GLqFuxJzLMN QnobZwrtLW4U+LdUMjiWZzlSmCqTMjd0EZyxFPOTi9nwvbG7PVjNDWUyetD9JunARcwe WgU7QjRZh5170C5rGxKtY5nXELbQtgh0eEmPxEjl1ERtDCvoiuNTz1Wah06yxoxDB75P LcqA== X-Forwarded-Encrypted: i=1; AJvYcCUdUbNlW2BkW2UYy87QXVk+kDN17ymdu16+GERPMJGMhs/SwcVzPUld9xJBiL/8xfKDpuEH85hc2jR9U5j4Y2TZaNfHUswhT4QkudQtM48zHa1xGqxgAuH2BJNpaWKq5F+IYKq85Q== X-Gm-Message-State: AOJu0Yz/L67QmAkjMj52rg1k+pekIMYVs+I50U4vt+8wGH29Og7beQhZ dVfvV3L5zUze9fA2chuBt8n4uvrGxhDVN4m4hkdFunlYaL1odGm/iJ+u5otPCMo= X-Google-Smtp-Source: AGHT+IE2ShYpKMdMbrRjB8C0x2MiX9wzjENIjU3Z/Sg7Mgzto4T5JKCuVzFq+s5AReUmk2BJ3DJ13A== X-Received: by 2002:a05:6358:59a2:b0:17b:6171:adaa with SMTP id c34-20020a05635859a200b0017b6171adaamr8729146rwf.20.1710704315465; Sun, 17 Mar 2024 12:38:35 -0700 (PDT) Received: from toolbox.iitism.net ([103.15.228.94]) by smtp.gmail.com with ESMTPSA id st6-20020a17090b1fc600b0029bbdc920besm6125995pjb.44.2024.03.17.12.38.27 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 17 Mar 2024 12:38:34 -0700 (PDT) From: Ayush Singh To: linux-kernel@vger.kernel.org (open list) Cc: Ayush Singh , jkridner@beagleboard.org, robertcnelson@beagleboard.org, lorforlinux@beagleboard.org, Rob Herring , Krzysztof Kozlowski , Conor Dooley , Nishanth Menon , Vignesh Raghavendra , Tero Kristo , Derek Kiernan , Dragan Cvetic , Arnd Bergmann , Greg Kroah-Hartman , Vaishnav M A , Mark Brown , Johan Hovold , Alex Elder , devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS), linux-arm-kernel@lists.infradead.org (moderated list:ARM/TEXAS INSTRUMENTS K3 ARCHITECTURE), linux-spi@vger.kernel.org (open list:SPI SUBSYSTEM), greybus-dev@lists.linaro.org (moderated list:GREYBUS SUBSYSTEM), Vaishnav M A Subject: [PATCH v4 4/5] mikrobus: Add mikroBUS driver Date: Mon, 18 Mar 2024 01:07:12 +0530 Message-ID: <20240317193714.403132-5-ayushdevel1325@gmail.com> X-Mailer: git-send-email 2.44.0 In-Reply-To: <20240317193714.403132-1-ayushdevel1325@gmail.com> References: <20240317193714.403132-1-ayushdevel1325@gmail.com> Precedence: bulk X-Mailing-List: linux-spi@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 DONOTMERGE this patch depends on Patch 1, 2, 3 mikroBUS driver aims to split the platform aspects of mikroBUS (pinmux, SPI/I2C/GPIO controller .etc) from the add-on board information, thus requiring one device tree overlay per port and just a single manifest describing the add-on board. The driver exposes a sysfs entry that allows passing mikroBUS manifest of add-on board to the driver. The driver then parses this manifest, sets up the pins and protocols and allows using the appropriate Linux driver. Here is an example: ``` cat /lib/firmware/mikrobus/AMBIENT-2-CLICK.mnfb > /sys/bus/mikrobus/devices/mikrobus-0/new_device ``` Another sysfs entry is exposed that allows removing a previously registered mikrobus add-on board: ``` echo " " > /sys/bus/mikrobus/devices/mikrobus-0/delete_device ``` 100s of mikroBUS addon board manifests can be found in the clickID repository. In the future the driver also aims to support plug and play support using 1-wire EEPROM and mikroBUS over greybus. Link: https://www.mikroe.com/clickid ClickID Co-developed-by: Vaishnav M A Signed-off-by: Vaishnav M A Signed-off-by: Ayush Singh --- MAINTAINERS | 1 + drivers/misc/Kconfig | 1 + drivers/misc/Makefile | 1 + drivers/misc/mikrobus/Kconfig | 15 + drivers/misc/mikrobus/Makefile | 5 + drivers/misc/mikrobus/mikrobus_core.c | 696 ++++++++++++++++++++++ drivers/misc/mikrobus/mikrobus_core.h | 151 +++++ drivers/misc/mikrobus/mikrobus_manifest.c | 503 ++++++++++++++++ drivers/misc/mikrobus/mikrobus_manifest.h | 29 + 9 files changed, 1402 insertions(+) create mode 100644 drivers/misc/mikrobus/Kconfig create mode 100644 drivers/misc/mikrobus/Makefile create mode 100644 drivers/misc/mikrobus/mikrobus_core.c create mode 100644 drivers/misc/mikrobus/mikrobus_core.h create mode 100644 drivers/misc/mikrobus/mikrobus_manifest.c create mode 100644 drivers/misc/mikrobus/mikrobus_manifest.h diff --git a/MAINTAINERS b/MAINTAINERS index 69418a058c6b..83bc5e48bef9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -14772,6 +14772,7 @@ M: Ayush Singh M: Vaishnav M A S: Maintained F: Documentation/devicetree/bindings/misc/mikrobus-connector.yaml +F: drivers/misc/mikrobus/* MIKROTIK CRS3XX 98DX3236 BOARD SUPPORT M: Luka Kovacic diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 4fb291f0bf7c..3d5c36205c6c 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -591,4 +591,5 @@ source "drivers/misc/cardreader/Kconfig" source "drivers/misc/uacce/Kconfig" source "drivers/misc/pvpanic/Kconfig" source "drivers/misc/mchp_pci1xxxx/Kconfig" +source "drivers/misc/mikrobus/Kconfig" endmenu diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index ea6ea5bbbc9c..b9ac88055b87 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -68,3 +68,4 @@ obj-$(CONFIG_TMR_INJECT) += xilinx_tmr_inject.o obj-$(CONFIG_TPS6594_ESM) += tps6594-esm.o obj-$(CONFIG_TPS6594_PFSM) += tps6594-pfsm.o obj-$(CONFIG_NSM) += nsm.o +obj-y += mikrobus/ diff --git a/drivers/misc/mikrobus/Kconfig b/drivers/misc/mikrobus/Kconfig new file mode 100644 index 000000000000..aa57b994dc66 --- /dev/null +++ b/drivers/misc/mikrobus/Kconfig @@ -0,0 +1,15 @@ +menuconfig MIKROBUS + tristate "Module for instantiating devices on mikroBUS ports" + depends on GPIOLIB + help + This option enables the mikroBUS driver. mikroBUS is an add-on + board socket standard that offers maximum expandability with + the smallest number of pins. The mikroBUS driver instantiates + devices on a mikroBUS port described mikroBUS manifest which is + passed using a sysfs interface. + + + Say Y here to enable support for this driver. + + To compile this code as a module, chose M here: the module + will be called mikrobus.ko diff --git a/drivers/misc/mikrobus/Makefile b/drivers/misc/mikrobus/Makefile new file mode 100644 index 000000000000..0e51c5a7db4b --- /dev/null +++ b/drivers/misc/mikrobus/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 +# mikroBUS Core + +obj-$(CONFIG_MIKROBUS) += mikrobus.o +mikrobus-y := mikrobus_core.o mikrobus_manifest.o diff --git a/drivers/misc/mikrobus/mikrobus_core.c b/drivers/misc/mikrobus/mikrobus_core.c new file mode 100644 index 000000000000..6aa20cef8e3b --- /dev/null +++ b/drivers/misc/mikrobus/mikrobus_core.c @@ -0,0 +1,696 @@ +// SPDX-License-Identifier: GPL-2.0: +/* + * mikroBUS driver for instantiating add-on + * board devices with an identifier EEPROM + * + * Copyright 2020 Vaishnav M A, BeagleBoard.org Foundation. + * Copyright 2024 Ayush Singh + */ + +#define pr_fmt(fmt) "mikrobus:%s: " fmt, __func__ + +#include "linux/gpio/driver.h" +#include "linux/gpio/machine.h" +#include "linux/gpio/consumer.h" +#include "linux/greybus/greybus_manifest.h" +#include "linux/i2c.h" +#include "linux/irq.h" +#include "linux/pinctrl/consumer.h" +#include "linux/platform_device.h" +#include "linux/spi/spi.h" + +#include "mikrobus_core.h" +#include "mikrobus_manifest.h" + +static struct class_compat *mikrobus_port_compat_class; + +static const struct bus_type mikrobus_bus_type = { + .name = "mikrobus", +}; + +static int mikrobus_board_register(struct mikrobus_port *port, + struct addon_board_info *board); +static void mikrobus_board_unregister(struct mikrobus_port *port, + struct addon_board_info *board); + +/* + * mikrobus_pinctrl_select: Select pinctrl state for mikrobus pin + * + * @port: mikrobus port + * @pinctrl_selected: pinctrl state to be selected + */ +static int mikrobus_pinctrl_select(struct mikrobus_port *port, + const char *pinctrl_selected) +{ + struct pinctrl_state *state; + int ret; + + state = pinctrl_lookup_state(port->pinctrl, pinctrl_selected); + if (IS_ERR(state)) { + return dev_err_probe(&port->dev, PTR_ERR(state), + "failed to find state %s", + pinctrl_selected); + } + + ret = pinctrl_select_state(port->pinctrl, state); + if (ret) { + return dev_err_probe(&port->dev, ret, + "failed to select state %s", + pinctrl_selected); + } + dev_dbg(&port->dev, "setting pinctrl %s", pinctrl_selected); + + return 0; +} + +/* + * mikrobus_pinctrl_setup: Setup mikrobus pins to either default of gpio + * + * @port: mikrobus port + * @board: mikrobus board or NULL for default state + * + * returns 0 on success, negative error code on failure + */ +static int mikrobus_pinctrl_setup(struct mikrobus_port *port, + struct addon_board_info *board) +{ + int ret; + + if (!board || board->pin_state[MIKROBUS_PIN_PWM] == MIKROBUS_STATE_PWM) + ret = mikrobus_pinctrl_select(port, "pwm_default"); + else + ret = mikrobus_pinctrl_select(port, "pwm_gpio"); + if (ret) + return ret; + + if (!board || board->pin_state[MIKROBUS_PIN_RX] == MIKROBUS_STATE_UART) + ret = mikrobus_pinctrl_select(port, "uart_default"); + else + ret = mikrobus_pinctrl_select(port, "uart_gpio"); + if (ret) + return ret; + + if (!board || board->pin_state[MIKROBUS_PIN_SCL] == MIKROBUS_STATE_I2C) + ret = mikrobus_pinctrl_select(port, "i2c_default"); + else + ret = mikrobus_pinctrl_select(port, "i2c_gpio"); + if (ret) + return ret; + + if (!board || board->pin_state[MIKROBUS_PIN_MOSI] == MIKROBUS_STATE_SPI) + ret = mikrobus_pinctrl_select(port, "spi_default"); + else + ret = mikrobus_pinctrl_select(port, "spi_gpio"); + + return ret; +} + +/* + * new_device_store: Expose sysfs entry for adding new board + * + * new_device_store: Allows userspace to add mikroBUS boards that lack 1-wire + * EEPROM for board identification by manually passing mikroBUS manifest + */ +static ssize_t new_device_store(struct device *dev, + struct device_attribute *attr, const char *buf, + size_t count) +{ + struct mikrobus_port *port = to_mikrobus_port(dev); + struct addon_board_info *board; + int ret; + + if (port->board) + return dev_err_probe(dev, -EBUSY, + "already has board registered"); + + board = devm_kzalloc(&port->dev, sizeof(*board), GFP_KERNEL); + if (!board) + return -ENOMEM; + + INIT_LIST_HEAD(&board->manifest_descs); + INIT_LIST_HEAD(&board->devices); + + ret = mikrobus_manifest_parse(board, (void *)buf, count); + if (ret < 0) { + ret = dev_err_probe(dev, -EINVAL, "failed to parse manifest"); + goto err_free_board; + } + + ret = mikrobus_board_register(port, board); + if (ret) { + ret = dev_err_probe(dev, -EINVAL, "failed to register board %s", + board->name); + goto err_free_board; + } + + return count; + +err_free_board: + devm_kfree(&port->dev, board); + return ret; +} +static DEVICE_ATTR_WO(new_device); + +/* + * delete_device_store: Expose sysfs entry for deleting board + */ +static ssize_t delete_device_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct mikrobus_port *port = to_mikrobus_port(dev); + + if (!port->board) + return dev_err_probe(dev, -ENODEV, + "does not have registered boards"); + + mikrobus_board_unregister(port, port->board); + return count; +} +static DEVICE_ATTR_IGNORE_LOCKDEP(delete_device, 0200, NULL, + delete_device_store); + +static struct attribute *mikrobus_port_attrs[] = { &dev_attr_new_device.attr, + &dev_attr_delete_device.attr, + NULL }; +ATTRIBUTE_GROUPS(mikrobus_port); + +static void mikrobus_port_release(struct device *dev) +{ +} + +static const struct device_type mikrobus_port_type = { + .groups = mikrobus_port_groups, + .release = mikrobus_port_release, +}; + +static int mikrobus_irq_get(struct mikrobus_port *port, int irqno, int irq_type) +{ + int irq; + + if (irqno > port->gpios->ndescs - 1) + return dev_err_probe(&port->dev, -ENODEV, + "GPIO %d does not exist", irqno); + + irq = gpiod_to_irq(port->gpios->desc[irqno]); + if (irq < 0) + return dev_err_probe(&port->dev, -EINVAL, + "could not get irq %d", irqno); + + irq_set_irq_type(irq, irq_type); + + return irq; +} + +static int mikrobus_gpio_setup(struct gpio_desc *gpio, int gpio_state) +{ + switch (gpio_state) { + case MIKROBUS_STATE_INPUT: + return gpiod_direction_input(gpio); + case MIKROBUS_STATE_OUTPUT_HIGH: + return gpiod_direction_output(gpio, 1); + case MIKROBUS_STATE_OUTPUT_LOW: + return gpiod_direction_output(gpio, 0); + case MIKROBUS_STATE_PWM: + case MIKROBUS_STATE_SPI: + case MIKROBUS_STATE_I2C: + default: + return 0; + } +} + +static char *mikrobus_gpio_chip_name_get(struct mikrobus_port *port, int gpio) +{ + struct gpio_chip *gpiochip; + + if (gpio > port->gpios->ndescs - 1) + return NULL; + + gpiochip = gpiod_to_chip(port->gpios->desc[gpio]); + return kmemdup(gpiochip->label, strlen(gpiochip->label), GFP_KERNEL); +} + +static int mikrobus_gpio_hwnum_get(struct mikrobus_port *port, int gpio) +{ + struct gpio_chip *gpiochip; + + if (gpio > port->gpios->ndescs - 1) + return -ENODEV; + + gpiochip = gpiod_to_chip(port->gpios->desc[gpio]); + return desc_to_gpio(port->gpios->desc[gpio]) - gpiochip->base; +} + +static void mikrobus_board_device_release_all(struct addon_board_info *info) +{ + struct board_device_info *dev, *next; + + list_for_each_entry_safe(dev, next, &info->devices, links) { + list_del(&dev->links); + kfree(dev); + } +} + +static int mikrobus_device_register(struct mikrobus_port *port, + struct board_device_info *dev, + char *board_name) +{ + struct gpiod_lookup_table *lookup; + struct spi_board_info *spi_info; + struct i2c_board_info *i2c_info; + struct platform_device *pdev; + struct fwnode_handle *fwnode; + struct spi_device *spi; + struct i2c_client *i2c; + int i, ret; + + dev_info(&port->dev, "registering device : %s", dev->drv_name); + + if (dev->gpio_lookup) { + lookup = dev->gpio_lookup; + + switch (dev->protocol) { + case GREYBUS_PROTOCOL_SPI: + lookup->dev_id = kasprintf(GFP_KERNEL, "%s.%u", + dev->drv_name, + port->chip_select[dev->reg]); + break; + case GREYBUS_PROTOCOL_RAW: + lookup->dev_id = kasprintf(GFP_KERNEL, "%s.%u", + dev->drv_name, dev->reg); + break; + default: + lookup->dev_id = kmemdup(dev->drv_name, + strlen(dev->drv_name), + GFP_KERNEL); + } + + dev_info(&port->dev, "adding lookup table : %s", + lookup->dev_id); + + for (i = 0; i < dev->num_gpio_resources; i++) { + lookup->table[i].key = mikrobus_gpio_chip_name_get( + port, lookup->table[i].chip_hwnum); + lookup->table[i].chip_hwnum = mikrobus_gpio_hwnum_get( + port, lookup->table[i].chip_hwnum); + } + + gpiod_add_lookup_table(lookup); + } + + switch (dev->protocol) { + case GREYBUS_PROTOCOL_SPI: + spi_info = + devm_kzalloc(&port->dev, sizeof(*spi_info), GFP_KERNEL); + strscpy_pad(spi_info->modalias, dev->drv_name, + sizeof(spi_info->modalias)); + if (dev->irq) + spi_info->irq = + mikrobus_irq_get(port, dev->irq, dev->irq_type); + if (dev->properties) { + fwnode = fwnode_create_software_node(dev->properties, + NULL); + spi_info->swnode = to_software_node(fwnode); + } + spi_info->chip_select = port->chip_select[dev->reg]; + spi_info->max_speed_hz = dev->max_speed_hz; + spi_info->mode = dev->mode; + + spi = spi_new_device(port->spi_ctrl, spi_info); + devm_kfree(&port->dev, spi_info); + if (!spi) + return dev_err_probe(&port->dev, -ENODEV, + "failed to register spi device"); + dev->dev_client = (void *)spi; + break; + case GREYBUS_PROTOCOL_I2C: + i2c_info = + devm_kzalloc(&port->dev, sizeof(*i2c_info), GFP_KERNEL); + if (!i2c_info) + return -ENOMEM; + + strscpy_pad(i2c_info->type, dev->drv_name, + sizeof(i2c_info->type)); + if (dev->irq) + i2c_info->irq = + mikrobus_irq_get(port, dev->irq, dev->irq_type); + if (dev->properties) { + fwnode = fwnode_create_software_node(dev->properties, + NULL); + i2c_info->swnode = to_software_node(fwnode); + } + i2c_info->addr = dev->reg; + + i2c = i2c_new_client_device(port->i2c_adap, i2c_info); + devm_kfree(&port->dev, i2c_info); + if (IS_ERR(dev->dev_client)) + return dev_err_probe(&port->dev, + PTR_ERR(dev->dev_client), + "failed to register i2c device"); + dev->dev_client = (void *)i2c; + break; + case GREYBUS_PROTOCOL_RAW: + pdev = platform_device_alloc(dev->drv_name, 0); + if (!pdev) + return -ENOMEM; + + if (dev->properties) { + ret = device_create_managed_software_node( + &pdev->dev, dev->properties, NULL); + if (ret) + return dev_err_probe( + &port->dev, ret, + "failed to create software node"); + } + ret = platform_device_add(dev->dev_client); + if (ret) + return dev_err_probe( + &port->dev, ret, + "failed to register platform device"); + dev->dev_client = (void *)pdev; + break; + case GREYBUS_PROTOCOL_UART: + default: + return -EINVAL; + } + + return 0; +} + +static void mikrobus_device_unregister(struct mikrobus_port *port, + struct board_device_info *dev, + char *board_name) +{ + dev_info(&port->dev, "removing device %s", dev->drv_name); + if (dev->gpio_lookup) { + gpiod_remove_lookup_table(dev->gpio_lookup); + kfree(dev->gpio_lookup->dev_id); + kfree(dev->gpio_lookup); + } + + kfree(dev->properties); + + switch (dev->protocol) { + case GREYBUS_PROTOCOL_SPI: + spi_unregister_device((struct spi_device *)dev->dev_client); + break; + case GREYBUS_PROTOCOL_I2C: + i2c_unregister_device((struct i2c_client *)dev->dev_client); + break; + case GREYBUS_PROTOCOL_RAW: + platform_device_unregister( + (struct platform_device *)dev->dev_client); + break; + case GREYBUS_PROTOCOL_UART: + break; + } +} + +static int mikrobus_board_register(struct mikrobus_port *port, + struct addon_board_info *board) +{ + struct board_device_info *devinfo, *next; + int ret, i; + + if (WARN_ON(list_empty(&board->devices))) + return false; + + if (port->pinctrl) { + ret = mikrobus_pinctrl_setup(port, board); + if (ret) + dev_err(&port->dev, + "failed to setup pinctrl state [%d]", ret); + } + + if (port->gpios) { + for (i = 0; i < port->gpios->ndescs; i++) { + ret = mikrobus_gpio_setup(port->gpios->desc[i], + board->pin_state[i]); + if (ret) + dev_err(&port->dev, + "failed to setup gpio %d, state %d", i, + board->pin_state[i]); + + gpiochip_free_own_desc(port->gpios->desc[i]); + } + } + + list_for_each_entry_safe(devinfo, next, &board->devices, links) + mikrobus_device_register(port, devinfo, board->name); + + port->board = board; + return 0; +} + +static void mikrobus_board_unregister(struct mikrobus_port *port, + struct addon_board_info *board) +{ + struct board_device_info *devinfo, *next; + + if (WARN_ON(list_empty(&board->devices))) + return; + + list_for_each_entry_safe(devinfo, next, &board->devices, links) + mikrobus_device_unregister(port, devinfo, board->name); + + mikrobus_board_device_release_all(board); + devm_kfree(&port->dev, board); + port->board = NULL; +} + +static int mikrobus_port_register(struct mikrobus_port *port) +{ + int ret; + + port->dev.bus = &mikrobus_bus_type; + port->dev.type = &mikrobus_port_type; + dev_set_name(&port->dev, "mikrobus-%d", port->id); + + dev_info(&port->dev, "registering port %s", dev_name(&port->dev)); + + ret = device_register(&port->dev); + if (ret) + return dev_err_probe(&port->dev, ret, + "port '%d': can't register device (%d)", + port->id, ret); + + ret = class_compat_create_link(mikrobus_port_compat_class, &port->dev, + port->dev.parent); + if (ret) + dev_warn(&port->dev, + "failed to create compatibility class link"); + + return ret; +} + +static void mikrobus_port_delete(struct mikrobus_port *port) +{ + if (port->board) + return dev_err( + &port->dev, + "attempting to delete port with registered boards, port [%s]", + dev_name(&port->dev)); + + class_compat_remove_link(mikrobus_port_compat_class, &port->dev, + port->dev.parent); + + devm_pinctrl_put(port->pinctrl); + put_device(&port->spi_ctrl->dev); + gpiod_put_array(port->gpios); + put_device(&port->i2c_adap->dev); + + device_unregister(&port->dev); + memset(&port->dev, 0, sizeof(port->dev)); +} + +static int mikrobus_port_probe_pinctrl_setup(struct mikrobus_port *port) +{ + struct device *dev = port->dev.parent; + struct pinctrl_state *state; + int ret; + + state = pinctrl_lookup_state(port->pinctrl, PINCTRL_STATE_DEFAULT); + if (IS_ERR(state)) + return dev_err_probe(dev, PTR_ERR(state), + "failed to find state %s", + PINCTRL_STATE_DEFAULT); + + ret = pinctrl_select_state(port->pinctrl, state); + if (ret) + return dev_err_probe(dev, ret, "Failed to select state %s", + PINCTRL_STATE_DEFAULT); + + ret = mikrobus_pinctrl_setup(port, NULL); + if (ret) + dev_err(dev, "failed to select pinctrl states [%d]", ret); + + return ret; +} + +static int mikrobus_port_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mikrobus_port *port; + struct device_node *np; + int ret; + + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + port->dev.parent = dev; + port->dev.of_node = pdev->dev.of_node; + + /* port id */ + port->id = of_alias_get_id(dev->of_node, "mikrobus"); + if (port->id) { + ret = dev_err_probe(dev, -EINVAL, "invalid mikrobus id"); + goto err_port; + } + + /* I2C setup */ + np = of_parse_phandle(dev->of_node, "i2c-adapter", 0); + if (!np) { + ret = dev_err_probe(dev, -ENODEV, "cannot parse i2c-adapter"); + goto err_port; + } + port->i2c_adap = of_find_i2c_adapter_by_node(np); + of_node_put(np); + if (!port->i2c_adap) { + ret = dev_err_probe(dev, -ENODEV, "cannot find i2c adapter"); + goto err_port; + } + + /* GPIO setup */ + port->gpios = gpiod_get_array(dev, "mikrobus", GPIOD_OUT_LOW); + if (IS_ERR(port->gpios)) { + ret = dev_err_probe(dev, PTR_ERR(port->gpios), + "failed to get gpio array [%ld]", + PTR_ERR(port->gpios)); + goto free_i2c; + } + + /* SPI setup */ + np = of_parse_phandle(dev->of_node, "spi-controller", 0); + if (!np) { + ret = dev_err_probe(dev, -ENODEV, + "cannot parse spi-controller"); + goto free_gpio; + } + port->spi_ctrl = of_find_spi_controller_by_node(np); + of_node_put(np); + if (!port->spi_ctrl) { + ret = dev_err_probe(dev, -ENODEV, "cannot find spi controller"); + goto free_gpio; + } + ret = device_property_read_u32_array(dev, "spi-cs", port->chip_select, + MIKROBUS_NUM_CS); + if (ret) { + dev_err(dev, "failed to get spi-cs [%d]", ret); + goto free_spi; + } + + /* pinctrl setup */ + port->pinctrl = devm_pinctrl_get(dev); + if (IS_ERR(port->pinctrl)) { + ret = dev_err_probe(dev, PTR_ERR(port->pinctrl), + "failed to get pinctrl [%ld]", + PTR_ERR(port->pinctrl)); + goto free_spi; + } + ret = mikrobus_port_probe_pinctrl_setup(port); + if (ret) { + dev_err(dev, "failed to setup pinctrl [%d]", ret); + goto free_pinctrl; + } + + /* TODO: UART */ + /* TODO: PWM */ + + ret = mikrobus_port_register(port); + if (ret) { + dev_err(dev, "port : can't register port [%d]", ret); + goto free_pinctrl; + } + + platform_set_drvdata(pdev, port); + + return 0; + +free_pinctrl: + devm_pinctrl_put(port->pinctrl); +free_spi: + put_device(&port->spi_ctrl->dev); +free_gpio: + gpiod_put_array(port->gpios); +free_i2c: + put_device(&port->i2c_adap->dev); +err_port: + put_device(&port->dev); + return ret; +} + +static int mikrobus_port_remove(struct platform_device *pdev) +{ + struct mikrobus_port *port = platform_get_drvdata(pdev); + + mikrobus_port_delete(port); + return 0; +} + +static const struct of_device_id mikrobus_port_of_match[] = { + { .compatible = "mikrobus-connector" }, + {}, +}; +MODULE_DEVICE_TABLE(of, mikrobus_port_of_match); + +static struct platform_driver mikrobus_port_driver = { + .probe = mikrobus_port_probe, + .remove = mikrobus_port_remove, + .driver = { + .name = "mikrobus", + .of_match_table = mikrobus_port_of_match, + }, +}; + +static int mikrobus_init(void) +{ + int ret; + + ret = bus_register(&mikrobus_bus_type); + if (ret) { + pr_err("bus_register failed (%d)", ret); + return ret; + } + + mikrobus_port_compat_class = class_compat_register("mikrobus-port"); + if (!mikrobus_port_compat_class) { + ret = -ENOMEM; + pr_err("class_compat register failed (%d)", ret); + goto class_err; + } + + ret = platform_driver_register(&mikrobus_port_driver); + if (ret) + pr_err("driver register failed [%d]", ret); + + return ret; + +class_err: + bus_unregister(&mikrobus_bus_type); + return ret; +} +subsys_initcall(mikrobus_init); + +static void mikrobus_exit(void) +{ + platform_driver_unregister(&mikrobus_port_driver); + bus_unregister(&mikrobus_bus_type); + class_compat_unregister(mikrobus_port_compat_class); +} +module_exit(mikrobus_exit); + +MODULE_AUTHOR("Vaishnav M A "); +MODULE_AUTHOR("Ayush Singh "); +MODULE_DESCRIPTION("mikroBUS main module"); +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/mikrobus/mikrobus_core.h b/drivers/misc/mikrobus/mikrobus_core.h new file mode 100644 index 000000000000..1d41ee32ca94 --- /dev/null +++ b/drivers/misc/mikrobus/mikrobus_core.h @@ -0,0 +1,151 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * mikroBUS Driver for instantiating add-on board devices + * + * Copyright 2020 Vaishnav M A, BeagleBoard.org Foundation. + * Copyright 2024 Ayush Singh + */ + +#ifndef __MIKROBUS_H +#define __MIKROBUS_H + +#include "linux/device.h" + +#define MIKROBUS_VERSION_MAJOR 0x00 +#define MIKROBUS_VERSION_MINOR 0x03 + +#define MIKROBUS_NUM_PINCTRL_STATE 4 +#define MIKROBUS_NUM_CS 2 + +#define MIKROBUS_PINCTRL_PWM 0 +#define MIKROBUS_PINCTRL_UART 1 +#define MIKROBUS_PINCTRL_I2C 2 +#define MIKROBUS_PINCTRL_SPI 3 + +enum mikrobus_property_type { + MIKROBUS_PROPERTY_TYPE_MIKROBUS = 0x00, + MIKROBUS_PROPERTY_TYPE_PROPERTY, + MIKROBUS_PROPERTY_TYPE_GPIO, + MIKROBUS_PROPERTY_TYPE_U8, + MIKROBUS_PROPERTY_TYPE_U16, + MIKROBUS_PROPERTY_TYPE_U32, + MIKROBUS_PROPERTY_TYPE_U64, +}; + +enum mikrobus_pin { + MIKROBUS_PIN_PWM = 0x00, + MIKROBUS_PIN_INT, + MIKROBUS_PIN_RX, + MIKROBUS_PIN_TX, + MIKROBUS_PIN_SCL, + MIKROBUS_PIN_SDA, + MIKROBUS_PIN_MOSI, + MIKROBUS_PIN_MISO, + MIKROBUS_PIN_SCK, + MIKROBUS_PIN_CS, + MIKROBUS_PIN_RST, + MIKROBUS_PIN_AN, + MIKROBUS_PORT_PIN_COUNT, +}; + +enum mikrobus_pin_state { + MIKROBUS_STATE_INPUT = 0x01, + MIKROBUS_STATE_OUTPUT_HIGH, + MIKROBUS_STATE_OUTPUT_LOW, + MIKROBUS_STATE_PWM, + MIKROBUS_STATE_SPI, + MIKROBUS_STATE_I2C, + MIKROBUS_STATE_UART, +}; + +/* + * board_device_info describes a single device on a mikrobus add-on + * board, an add-on board can present one or more device to the host + * + * @gpio_lookup: used to provide the GPIO lookup table for + * passing the named GPIOs to device drivers. + * @properties: used to provide the property_entry to pass named + * properties to device drivers, applicable only when driver uses + * device_property_read_* calls to fetch the properties. + * @num_gpio_resources: number of named gpio resources for the device, + * used mainly for gpiod_lookup_table memory allocation. + * @num_properties: number of custom properties for the device, + * used mainly for property_entry memory allocation. + * @protocol: used to know the type of the device and it should + * contain one of the values defined under 'enum greybus_class_type' + * under linux/greybus/greybus_manifest.h + * @reg: I2C address for the device, for devices on the SPI bus + * this field is the chip select address relative to the mikrobus + * port:0->device chip select connected to CS pin on mikroBUS port + * 1->device chip select connected to RST Pin on mikroBUS port + * @mode: SPI mode + * @max_speed_hz: SPI max speed(Hz) + * @drv_name: device_id to match with the driver + * @irq_type: type of IRQ trigger , match with defines in linux/interrupt.h + * @irq: irq number relative to the mikrobus port should contain one of the + * values defined under 'enum mikrobus_pin' + * @id: device id starting from 1 + */ +struct board_device_info { + struct gpiod_lookup_table *gpio_lookup; + struct property_entry *properties; + struct list_head links; + unsigned short num_gpio_resources; + unsigned short num_properties; + unsigned short protocol; + unsigned short reg; + unsigned int mode; + void *dev_client; + u32 max_speed_hz; + char *drv_name; + int irq_type; + int irq; + int id; +}; + +/* + * addon_board_info describes a mikrobus add-on device the add-on + * board, an add-on board can present one or more device to the host + * + * @manifest_descs: list of manifest descriptors + * @devices: list of devices on the board + * @pin_state: the state of each pin on the mikrobus port required + * for the add-on board should contain one of the values defined under + * 'enum mikrobus_pin_state' restrictions are as per mikrobus standard + * specifications. + * @name: add-on board name + */ +struct addon_board_info { + struct list_head manifest_descs; + struct list_head devices; + u8 pin_state[MIKROBUS_PORT_PIN_COUNT]; + char *name; +}; + +/* + * mikrobus_port describes the peripherals mapped to a mikrobus port. + * + * @chip_select: chip select number mapped to the SPI CS pin on the + * mikrobus port and the RST pin on the mikrobus port + * @board: pointer to the attached add-on board. + * @spi_ctrl: SPI controller attached to the mikrobus port. + * @i2c_adap: I2C adapter attached to the mikrobus port. + * @gpios: GPIOs attached to the mikrobus port. + * @pinctrl: pinctrl attached to the mikrobus port. + * @dev: device structure for the mikrobus port. + * @id: port id starting from 1 + */ +struct mikrobus_port { + u32 chip_select[MIKROBUS_NUM_CS]; + struct addon_board_info *board; + struct spi_controller *spi_ctrl; + struct i2c_adapter *i2c_adap; + struct gpio_descs *gpios; + struct pinctrl *pinctrl; + struct device dev; + int id; +}; + +#define to_mikrobus_port(d) container_of(d, struct mikrobus_port, dev) + +#endif /* __MIKROBUS_H */ diff --git a/drivers/misc/mikrobus/mikrobus_manifest.c b/drivers/misc/mikrobus/mikrobus_manifest.c new file mode 100644 index 000000000000..5f30620277be --- /dev/null +++ b/drivers/misc/mikrobus/mikrobus_manifest.c @@ -0,0 +1,503 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * mikroBUS manifest parsing, an + * extension to Greybus Manifest Parsing + * under drivers/greybus/manifest.c + * + * Copyright 2014-2015 Google Inc. + * Copyright 2014-2015 Linaro Ltd. + * Copyright 2024 Ayush Singh + */ + +#define pr_fmt(fmt) "mikrobus_manifest:%s: " fmt, __func__ + +#include "linux/gpio/machine.h" +#include "linux/greybus/greybus_manifest.h" +#include "linux/property.h" +#include "mikrobus_manifest.h" + +struct manifest_desc { + struct list_head links; + size_t size; + void *data; + enum greybus_descriptor_type type; +}; + +static void manifest_descriptor_release_all(struct addon_board_info *board) +{ + struct manifest_desc *descriptor, *next; + + list_for_each_entry_safe(descriptor, next, &board->manifest_descs, + links) { + list_del(&descriptor->links); + kfree(descriptor); + } +} + +static int board_descriptor_add(struct addon_board_info *board, + struct greybus_descriptor *desc, size_t size) +{ + struct greybus_descriptor_header *desc_header = &desc->header; + struct manifest_desc *descriptor; + size_t desc_size, expected_size; + + if (size < sizeof(*desc_header)) { + pr_err("short descriptor (%zu < %zu)", size, + sizeof(*desc_header)); + return -EINVAL; + } + + desc_size = le16_to_cpu(desc_header->size); + if (desc_size > size) { + pr_err("incorrect descriptor size (%zu != %zu)", size, + desc_size); + return -EINVAL; + } + + expected_size = sizeof(*desc_header); + switch (desc_header->type) { + case GREYBUS_TYPE_STRING: + expected_size += sizeof(struct greybus_descriptor_string); + expected_size += desc->string.length; + expected_size = ALIGN(expected_size, 4); + break; + case GREYBUS_TYPE_PROPERTY: + expected_size += sizeof(struct greybus_descriptor_property); + expected_size += desc->property.length; + expected_size = ALIGN(expected_size, 4); + break; + case GREYBUS_TYPE_DEVICE: + expected_size += sizeof(struct greybus_descriptor_device); + break; + case GREYBUS_TYPE_MIKROBUS: + expected_size += sizeof(struct greybus_descriptor_mikrobus); + break; + case GREYBUS_TYPE_INTERFACE: + expected_size += sizeof(struct greybus_descriptor_interface); + break; + case GREYBUS_TYPE_CPORT: + expected_size += sizeof(struct greybus_descriptor_cport); + break; + case GREYBUS_TYPE_BUNDLE: + expected_size += sizeof(struct greybus_descriptor_bundle); + break; + case GREYBUS_TYPE_INVALID: + default: + pr_err("invalid descriptor type %d", desc_header->type); + return -EINVAL; + } + + descriptor = kzalloc(sizeof(*descriptor), GFP_KERNEL); + if (!descriptor) + return -ENOMEM; + + descriptor->size = desc_size; + descriptor->data = (char *)desc + sizeof(*desc_header); + descriptor->type = desc_header->type; + list_add_tail(&descriptor->links, &board->manifest_descs); + + return desc_size; +} + +static char *mikrobus_string_get(struct addon_board_info *board, u8 string_id) +{ + struct greybus_descriptor_string *desc_string; + struct manifest_desc *descriptor; + bool found = false; + char *string; + + if (!string_id) + return NULL; + + list_for_each_entry(descriptor, &board->manifest_descs, links) { + if (descriptor->type != GREYBUS_TYPE_STRING) + continue; + + desc_string = descriptor->data; + if (desc_string->id == string_id) { + found = true; + break; + } + } + + if (!found) + return ERR_PTR(-ENOENT); + + string = kmemdup(&desc_string->string, desc_string->length + 1, + GFP_KERNEL); + if (!string) + return ERR_PTR(-ENOMEM); + + string[desc_string->length] = '\0'; + + return string; +} + +static void mikrobus_state_get(struct addon_board_info *board) +{ + struct greybus_descriptor_mikrobus *mikrobus; + struct greybus_descriptor_interface *interface; + struct manifest_desc *descriptor; + bool found = false; + size_t i; + + list_for_each_entry(descriptor, &board->manifest_descs, links) { + if (descriptor->type == GREYBUS_TYPE_MIKROBUS) { + mikrobus = descriptor->data; + found = true; + break; + } + } + + if (!found) { + pr_err("mikrobus descriptor not found"); + return; + } + + for (i = 0; i < MIKROBUS_PORT_PIN_COUNT; i++) + board->pin_state[i] = mikrobus->pin_state[i]; + + found = false; + list_for_each_entry(descriptor, &board->manifest_descs, links) { + if (descriptor->type == GREYBUS_TYPE_INTERFACE) { + interface = descriptor->data; + found = true; + break; + } + } + + if (!found) { + pr_err("interface descriptor not found"); + return; + } + + board->name = mikrobus_string_get(board, interface->product_stringid); +} + +static struct property_entry * +mikrobus_property_entry_get(struct addon_board_info *board, u8 *prop_link, + int num_properties) +{ + struct greybus_descriptor_property *desc_property; + struct manifest_desc *descriptor; + struct property_entry *properties; + bool found = false; + char *prop_name; + int i, ret; + u64 *val_u64; + u32 *val_u32; + u16 *val_u16; + u8 *val_u8; + + properties = kcalloc(num_properties, sizeof(*properties), GFP_KERNEL); + if (!properties) + return ERR_PTR(-ENOMEM); + + for (i = 0; i < num_properties; i++) { + list_for_each_entry(descriptor, &board->manifest_descs, links) { + if (descriptor->type != GREYBUS_TYPE_PROPERTY) + continue; + + desc_property = descriptor->data; + if (desc_property->id == prop_link[i]) { + found = true; + break; + } + } + + if (!found) { + ret = -ENOENT; + goto early_exit; + } + + prop_name = mikrobus_string_get( + board, desc_property->propname_stringid); + if (!prop_name) { + ret = -ENOENT; + goto early_exit; + } + + switch (desc_property->type) { + case MIKROBUS_PROPERTY_TYPE_U8: + val_u8 = kmemdup(&desc_property->value, + (desc_property->length) * sizeof(u8), + GFP_KERNEL); + if (desc_property->length == 1) + properties[i] = + PROPERTY_ENTRY_U8(prop_name, *val_u8); + else + properties[i] = PROPERTY_ENTRY_U8_ARRAY_LEN( + prop_name, (void *)desc_property->value, + desc_property->length); + break; + case MIKROBUS_PROPERTY_TYPE_U16: + val_u16 = kmemdup(&desc_property->value, + (desc_property->length) * sizeof(u16), + GFP_KERNEL); + if (desc_property->length == 1) + properties[i] = + PROPERTY_ENTRY_U16(prop_name, *val_u16); + else + properties[i] = PROPERTY_ENTRY_U16_ARRAY_LEN( + prop_name, (void *)desc_property->value, + desc_property->length); + break; + case MIKROBUS_PROPERTY_TYPE_U32: + val_u32 = kmemdup(&desc_property->value, + (desc_property->length) * sizeof(u32), + GFP_KERNEL); + if (desc_property->length == 1) + properties[i] = + PROPERTY_ENTRY_U32(prop_name, *val_u32); + else + properties[i] = PROPERTY_ENTRY_U32_ARRAY_LEN( + prop_name, (void *)desc_property->value, + desc_property->length); + break; + case MIKROBUS_PROPERTY_TYPE_U64: + val_u64 = kmemdup(&desc_property->value, + (desc_property->length) * sizeof(u64), + GFP_KERNEL); + if (desc_property->length == 1) + properties[i] = + PROPERTY_ENTRY_U64(prop_name, *val_u64); + else + properties[i] = PROPERTY_ENTRY_U64_ARRAY_LEN( + prop_name, (void *)desc_property->value, + desc_property->length); + break; + default: + ret = -EINVAL; + goto early_exit; + } + } + return properties; + +early_exit: + kfree(properties); + return ERR_PTR(ret); +} + +static u8 *mikrobus_property_link_get(struct addon_board_info *board, + u8 prop_id, + struct board_device_info *board_dev, + u8 prop_type) +{ + struct greybus_descriptor_property *desc_property; + struct manifest_desc *descriptor; + bool found = false; + u8 *val_u8; + + if (!prop_id) + return NULL; + + list_for_each_entry(descriptor, &board->manifest_descs, links) { + if (descriptor->type != GREYBUS_TYPE_PROPERTY) + continue; + + desc_property = descriptor->data; + if (desc_property->id == prop_id && + desc_property->type == prop_type) { + found = true; + break; + } + } + + if (!found) + return ERR_PTR(-ENOENT); + + val_u8 = kmemdup(&desc_property->value, desc_property->length, + GFP_KERNEL); + if (prop_type == MIKROBUS_PROPERTY_TYPE_GPIO) + board_dev->num_gpio_resources = desc_property->length; + else if (prop_type == MIKROBUS_PROPERTY_TYPE_PROPERTY) + board_dev->num_properties = desc_property->length; + + return val_u8; +} + +static int +mikrobus_manifest_attach_device(struct addon_board_info *board, + struct greybus_descriptor_device *dev_desc) +{ + struct greybus_descriptor_property *desc_property; + u8 *gpio_desc_link, *prop_link, *gpioval; + struct board_device_info *board_dev; + struct gpiod_lookup_table *lookup; + struct manifest_desc *descriptor; + int ret, i; + + board_dev = kzalloc(sizeof(*board_dev), GFP_KERNEL); + if (!board_dev) + return -ENOMEM; + + board_dev->id = dev_desc->id; + board_dev->drv_name = + mikrobus_string_get(board, dev_desc->driver_stringid); + if (!board_dev->drv_name) { + ret = -ENOENT; + goto err_free_board_dev; + } + + board_dev->protocol = dev_desc->protocol; + board_dev->reg = dev_desc->reg; + board_dev->irq = dev_desc->irq; + board_dev->irq_type = dev_desc->irq_type; + board_dev->max_speed_hz = le32_to_cpu(dev_desc->max_speed_hz); + board_dev->mode = dev_desc->mode; + pr_info("parsed device %d, driver=%s", board_dev->id, + board_dev->drv_name); + + if (dev_desc->prop_link > 0) { + prop_link = mikrobus_property_link_get( + board, dev_desc->prop_link, board_dev, + MIKROBUS_PROPERTY_TYPE_PROPERTY); + if (!prop_link) { + ret = -ENOENT; + goto err_free_board_dev; + } + + pr_info("device %d, number of properties=%d", board_dev->id, + board_dev->num_properties); + board_dev->properties = mikrobus_property_entry_get( + board, prop_link, board_dev->num_properties); + } + + if (dev_desc->gpio_link > 0) { + gpio_desc_link = mikrobus_property_link_get( + board, dev_desc->gpio_link, board_dev, + MIKROBUS_PROPERTY_TYPE_GPIO); + if (!gpio_desc_link) { + ret = -ENOENT; + goto err_free_board_dev; + } + + pr_info("device %d, number of gpio resource=%d", board_dev->id, + board_dev->num_gpio_resources); + lookup = kzalloc(struct_size(lookup, table, + board_dev->num_gpio_resources), + GFP_KERNEL); + if (!lookup) { + ret = -ENOMEM; + goto err_free_board_dev; + } + + for (i = 0; i < board_dev->num_gpio_resources; i++) { + list_for_each_entry(descriptor, &board->manifest_descs, + links) { + if (descriptor->type != GREYBUS_TYPE_PROPERTY) + continue; + + desc_property = descriptor->data; + if (desc_property->id == gpio_desc_link[i]) { + gpioval = desc_property->value; + lookup->table[i].chip_hwnum = + gpioval[0]; + lookup->table[i].flags = gpioval[1]; + lookup->table[i] + .con_id = mikrobus_string_get( + board, + desc_property + ->propname_stringid); + break; + } + } + } + board_dev->gpio_lookup = lookup; + } + + list_add_tail(&board_dev->links, &board->devices); + return 0; + +err_free_board_dev: + kfree(board_dev); + return ret; +} + +static int mikrobus_manifest_parse_devices(struct addon_board_info *board) +{ + struct greybus_descriptor_device *desc_device; + struct manifest_desc *desc, *next; + int ret, devcount = 0; + + list_for_each_entry_safe(desc, next, &board->manifest_descs, links) { + if (desc->type != GREYBUS_TYPE_DEVICE) + continue; + + desc_device = desc->data; + ret = mikrobus_manifest_attach_device(board, desc_device); + devcount++; + } + + return devcount; +} + +static size_t mikrobus_manifest_header_validate(void *data, size_t size) +{ + struct greybus_manifest_header *header = data; + u16 manifest_size = le16_to_cpu(header->size); + + if (manifest_size < sizeof(*header)) { + pr_err("short manifest (%zu < %zu)", size, sizeof(*header)); + return -EINVAL; + } + + if (header->version_major > MIKROBUS_VERSION_MAJOR) { + pr_err("manifest version too new (%u.%u > %u.%u)", + header->version_major, header->version_minor, + MIKROBUS_VERSION_MAJOR, MIKROBUS_VERSION_MINOR); + return -EINVAL; + } + + return manifest_size; +} + +int mikrobus_manifest_parse(struct addon_board_info *board, void *data, + size_t size) +{ + struct greybus_manifest_header *header; + struct greybus_manifest *manifest; + struct greybus_descriptor *desc; + int dev_count, desc_size, ret; + u16 manifest_size; + + if (size < sizeof(*header)) { + pr_err("short manifest (%zu < %zu)", size, sizeof(*header)); + return -EINVAL; + } + + ret = mikrobus_manifest_header_validate(data, size); + if (ret < 0) { + pr_err("invalid manifest header: %u", manifest_size); + return ret; + } + + manifest = data; + manifest_size = ret; + + if (manifest_size != size) { + pr_err("invalid manifest size(%zu < %u)", size, manifest_size); + return -EINVAL; + } + + desc = manifest->descriptors; + size -= sizeof(*header); + while (size) { + desc_size = board_descriptor_add(board, desc, size); + if (desc_size < 0) { + pr_err("invalid manifest descriptor, size: %u", + desc_size); + return -EINVAL; + } + + desc = (void *)desc + desc_size; + size -= desc_size; + } + + mikrobus_state_get(board); + dev_count = mikrobus_manifest_parse_devices(board); + pr_info("%s manifest parsed with %d devices", board->name, dev_count); + manifest_descriptor_release_all(board); + + return dev_count; +} diff --git a/drivers/misc/mikrobus/mikrobus_manifest.h b/drivers/misc/mikrobus/mikrobus_manifest.h new file mode 100644 index 000000000000..39ae53a25fc4 --- /dev/null +++ b/drivers/misc/mikrobus/mikrobus_manifest.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * mikroBUS manifest definition + * extension to Greybus Manifest Definition + * + * Copyright 2014-2015 Google Inc. + * Copyright 2014-2015 Linaro Ltd. + * + * Released under the GPLv2 and BSD licenses. + */ + +#ifndef __MIKROBUS_MANIFEST_H +#define __MIKROBUS_MANIFEST_H + +#include "mikrobus_core.h" + +/* + * mikrobus_manifest_header - parse mikroBUS manifest + * + * @info: addon board info structure to populate with parsed information + * @data: pointer to the manifest blob + * @size: size of the manifest blob + * + * returns: number of devices on success, negative error code on failure + */ +int mikrobus_manifest_parse(struct addon_board_info *info, void *data, + size_t size); + +#endif /* __MIKROBUS_MANIFEST_H */