diff mbox series

[v3,05/10] ASoC: renesas: rsnd: care BRGA/BRGB select in rsnd_adg_clk_enable()

Message ID 87sema1a3r.wl-kuninori.morimoto.gx@renesas.com
State Superseded
Headers show
Series ASoC: add Renesas MSIOF sound driver | expand

Commit Message

Kuninori Morimoto April 15, 2025, 1:34 a.m. UTC 
Renesas rsnd related clocks are enabled by rsnd_adg_clk_enable(),
but it doesn't care about BRGA/BRGB selection (It is handled when
SSI was started) (BRGA is used for 44.1kHz lineage, BRGB is used for
48kHz lineage in this driver).

But it should be handled since probe time.
Includes BRGCKR_31 in adg->ckr to handle it since boot time.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 sound/soc/renesas/rcar/adg.c | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/sound/soc/renesas/rcar/adg.c b/sound/soc/renesas/rcar/adg.c
index 191f212d338c..e6b7273b27ad 100644
--- a/sound/soc/renesas/rcar/adg.c
+++ b/sound/soc/renesas/rcar/adg.c
@@ -19,6 +19,7 @@ 
 #define CLKOUT3	3
 #define CLKOUTMAX 4
 
+#define BRGCKR_31	(1 << 31)
 #define BRRx_MASK(x) (0x3FF & x)
 
 static struct rsnd_mod_ops adg_ops = {
@@ -361,10 +362,13 @@  int rsnd_adg_ssi_clk_try_start(struct rsnd_mod *ssi_mod, unsigned int rate)
 
 	rsnd_adg_set_ssi_clk(ssi_mod, data);
 
+	ckr = adg->ckr & ~BRGCKR_31;
 	if (0 == (rate % 8000))
-		ckr = 0x80000000; /* BRGB output = 48kHz */
-
-	rsnd_mod_bset(adg_mod, BRGCKR, 0x80770000, adg->ckr | ckr);
+		ckr |= BRGCKR_31; /* use BRGB output = 48kHz */
+	if (ckr != adg->ckr) {
+		rsnd_mod_bset(adg_mod, BRGCKR, 0x80770000, adg->ckr);
+		adg->ckr = ckr;
+	}
 
 	dev_dbg(dev, "CLKOUT is based on BRG%c (= %dHz)\n",
 		(ckr) ? 'B' : 'A',
@@ -683,6 +687,9 @@  static int rsnd_adg_get_clkout(struct rsnd_priv *priv)
 	}
 
 rsnd_adg_get_clkout_end:
+	if (0 == (req_rate[0] % 8000))
+		ckr |= BRGCKR_31; /* use BRGB output = 48kHz */
+
 	adg->ckr = ckr;
 	adg->brga = brga;
 	adg->brgb = brgb;