mbox series

[v2,0/2] usb: Add driver for USB signal re-mapper

Message ID 20201009190839.12612-1-alcooperx@gmail.com
Headers show
Series usb: Add driver for USB signal re-mapper | expand

Message

Alan Cooper Oct. 9, 2020, 7:08 p.m. UTC 
v2
- Move file from drivers/usb/host to drivers/usb/misc
- Combine Kconfig/Makefile patch and new driver patch
- Fixed bindings .yaml document based on feedback from Rob Herring
- NOTE: There were suggestions to use a pinmux driver or
  GPIO aggregator, but I think agreement was reached that
  they weren't a good fit.
  
Al Cooper (2):
  dt-bindings: Add support for Broadcom USB pin map driver
  usb: Add driver to allow any GPIO to be used for 7211 USB signals

 .../bindings/usb/brcm,usb-pinmap.yaml         |  70 ++++
 MAINTAINERS                                   |   8 +
 drivers/usb/misc/Kconfig                      |   9 +
 drivers/usb/misc/Makefile                     |   1 +
 drivers/usb/misc/brcmstb-usb-pinmap.c         | 348 ++++++++++++++++++
 5 files changed, 436 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
 create mode 100644 drivers/usb/misc/brcmstb-usb-pinmap.c