| Message ID | 20231016-dwc3-refactor-v1-0-ab4a84165470@quicinc.com |
|---|---|
| Headers | show |
| Series | usb: dwc3: qcom: Flatten dwc3 structure | expand |
Hi Bjorn, On Mon, Oct 16, 2023, Bjorn Andersson wrote: > The USB IP-block found in most Qualcomm platforms is modelled in the > Linux kernel as 3 different independent device drivers, but as shown by > the already existing layering violations in the Qualcomm glue driver > they can not be operated independently. > > With the current implementation, the glue driver registers the core and > has no way to know when this is done. As a result, e.g. the suspend > callbacks needs to guard against NULL pointer dereferences when trying > to peek into the struct dwc3 found in the drvdata of the child. > > Missing from the upstream Qualcomm USB support is handling of role > switching, in which the glue needs to be notified upon DRD mode changes. > Several attempts has been made through the years to register callbacks > etc, but they always fall short when it comes to handling of the core's > probe deferral on resources etc. > > Furhtermore, the DeviceTree binding is a direct representation of the > Linux driver model, and doesn't necessarily describe "the USB IP-block". > > This series therefor attempts to flatten the driver split, and operate > the glue and core out of the same platform_device instance. And in order > to do this, the DeviceTree representation of the IP block is flattened. > > As a side effect, much of the ACPI integration code is dropped. > > Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> > --- > Bjorn Andersson (12): > dt-bindings: usb: qcom,dwc3: Add qcom,sc8180x-dwc3 > usb: dwc3: qcom: Rename dwc3 platform_device reference > usb: dwc3: qcom: Merge resources from urs_usb device > usb: dwc3: Expose core driver as library > usb: dwc3: Override end of dwc3 memory resource > usb: dwc3: qcom: Add dwc3 core reference in driver state > usb: dwc3: qcom: Instantiate dwc3 core directly > usb: dwc3: qcom: Inline the qscratch constants > dt-bindings: usb: qcom,dwc3: Rename to "glue" > dt-bindings: usb: qcom,dwc3: Introduce flattened qcom,dwc3 binding > usb: dwc3: qcom: Flatten the Qualcomm dwc3 binding and implementation > arm64: dts: qcom: sc8180x: flatten usb_sec node > > .../devicetree/bindings/usb/qcom,dwc3-glue.yaml | 626 +++++++++++++++++++++ > .../devicetree/bindings/usb/qcom,dwc3.yaml | 321 ++++------- > .../devicetree/bindings/usb/snps,dwc3.yaml | 14 +- > .../arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 6 +- > arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 6 +- > arch/arm64/boot/dts/qcom/sc8180x.dtsi | 34 +- > drivers/usb/dwc3/core.c | 136 +++-- > drivers/usb/dwc3/core.h | 10 + > drivers/usb/dwc3/dwc3-qcom.c | 328 ++++++----- > 9 files changed, 1057 insertions(+), 424 deletions(-) > --- > base-commit: 4d0515b235dec789578d135a5db586b25c5870cb > change-id: 20231016-dwc3-refactor-931e3b08a8b9 > > Best regards, > -- > Bjorn Andersson <quic_bjorande@quicinc.com> > First of all, thanks for the work. I just did a quick review through the changes, and I think it's great! (This will address some issues I also have with dwc3 currently too.) BR, Thinh
On Mon, Oct 16, 2023 at 08:11:08PM -0700, Bjorn Andersson wrote: > The USB IP-block found in most Qualcomm platforms is modelled in the > Linux kernel as 3 different independent device drivers, but as shown by > the already existing layering violations in the Qualcomm glue driver > they can not be operated independently. > > With the current implementation, the glue driver registers the core and > has no way to know when this is done. As a result, e.g. the suspend > callbacks needs to guard against NULL pointer dereferences when trying > to peek into the struct dwc3 found in the drvdata of the child. > > Missing from the upstream Qualcomm USB support is handling of role > switching, in which the glue needs to be notified upon DRD mode changes. > Several attempts has been made through the years to register callbacks > etc, but they always fall short when it comes to handling of the core's > probe deferral on resources etc. Nice to see this finally being worked on. It's not clear why mode-change notifications would be a problem though, as if you get such a notification, you know that core has been probed. > Furhtermore, the DeviceTree binding is a direct representation of the > Linux driver model, and doesn't necessarily describe "the USB IP-block". True. Johan
The USB IP-block found in most Qualcomm platforms is modelled in the Linux kernel as 3 different independent device drivers, but as shown by the already existing layering violations in the Qualcomm glue driver they can not be operated independently. With the current implementation, the glue driver registers the core and has no way to know when this is done. As a result, e.g. the suspend callbacks needs to guard against NULL pointer dereferences when trying to peek into the struct dwc3 found in the drvdata of the child. Missing from the upstream Qualcomm USB support is handling of role switching, in which the glue needs to be notified upon DRD mode changes. Several attempts has been made through the years to register callbacks etc, but they always fall short when it comes to handling of the core's probe deferral on resources etc. Furhtermore, the DeviceTree binding is a direct representation of the Linux driver model, and doesn't necessarily describe "the USB IP-block". This series therefor attempts to flatten the driver split, and operate the glue and core out of the same platform_device instance. And in order to do this, the DeviceTree representation of the IP block is flattened. As a side effect, much of the ACPI integration code is dropped. Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> --- Bjorn Andersson (12): dt-bindings: usb: qcom,dwc3: Add qcom,sc8180x-dwc3 usb: dwc3: qcom: Rename dwc3 platform_device reference usb: dwc3: qcom: Merge resources from urs_usb device usb: dwc3: Expose core driver as library usb: dwc3: Override end of dwc3 memory resource usb: dwc3: qcom: Add dwc3 core reference in driver state usb: dwc3: qcom: Instantiate dwc3 core directly usb: dwc3: qcom: Inline the qscratch constants dt-bindings: usb: qcom,dwc3: Rename to "glue" dt-bindings: usb: qcom,dwc3: Introduce flattened qcom,dwc3 binding usb: dwc3: qcom: Flatten the Qualcomm dwc3 binding and implementation arm64: dts: qcom: sc8180x: flatten usb_sec node .../devicetree/bindings/usb/qcom,dwc3-glue.yaml | 626 +++++++++++++++++++++ .../devicetree/bindings/usb/qcom,dwc3.yaml | 321 ++++------- .../devicetree/bindings/usb/snps,dwc3.yaml | 14 +- .../arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts | 6 +- arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 6 +- arch/arm64/boot/dts/qcom/sc8180x.dtsi | 34 +- drivers/usb/dwc3/core.c | 136 +++-- drivers/usb/dwc3/core.h | 10 + drivers/usb/dwc3/dwc3-qcom.c | 328 ++++++----- 9 files changed, 1057 insertions(+), 424 deletions(-) --- base-commit: 4d0515b235dec789578d135a5db586b25c5870cb change-id: 20231016-dwc3-refactor-931e3b08a8b9 Best regards,