| Message ID | 0041DFA5200EFB1B+20240803074619.563116-1-yt@radxa.com |
|---|---|
| State | New |
| Headers | show |
| Series | USB: serial: option: add MeiG Smart SRM825L | expand |
This was my first submitted patch so I forgot to run get_maintainer.pl and collect the CC list, so I'm sending this out as a reminder. qmi_wwan part was accepted a while ago: https://git.kernel.org/netdev/net/c/1ca645a2f74a On 2024/8/3 15:46, ZHANG Yuntian wrote: > Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip. > > T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 > D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 > P: Vendor=2dee ProdID=4d22 Rev= 4.14 > S: Manufacturer=MEIG > S: Product=LTE-A Module > S: SerialNumber=6f345e48 > C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA > I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option > E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms > E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms > E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms > I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms > E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms > I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option > E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms > E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms > E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms > I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) > E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms > E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms > I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan > E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms > E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms > E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms > > Signed-off-by: ZHANG Yuntian <yt@radxa.com> > --- > drivers/usb/serial/option.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c > index 311040f9b9352..6811dbd2f4c08 100644 > --- a/drivers/usb/serial/option.c > +++ b/drivers/usb/serial/option.c > @@ -621,6 +621,8 @@ static void option_instat_callback(struct urb *urb); > #define MEIGSMART_VENDOR_ID 0x2dee > /* MeiG Smart SLM320 based on UNISOC UIS8910 */ > #define MEIGSMART_PRODUCT_SLM320 0x4d41 > +/* MeiG Smart SRM825L based on Qualcomm 315 */ > +#define MEIGSMART_PRODUCT_SRM825L 0x4d22 > > /* Device flags */ > > @@ -2366,6 +2368,9 @@ static const struct usb_device_id option_ids[] = { > { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) }, > { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, LUAT_PRODUCT_AIR720U, 0xff, 0, 0) }, > { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SLM320, 0xff, 0, 0) }, > + { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x30) }, > + { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x40) }, > + { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x60) }, > { } /* Terminating entry */ > }; > MODULE_DEVICE_TABLE(usb, option_ids);
On Sat, Aug 17, 2024 at 04:58:24PM +0800, ZHANG Yuntian wrote: > This was my first submitted patch so I forgot to run get_maintainer.pl and > collect the CC list, so I'm sending this out as a reminder. > > qmi_wwan part was accepted a while ago: > > https://git.kernel.org/netdev/net/c/1ca645a2f74a It is vacation time in Europe for many of us, please give us a few weeks to get back and catch up with things like this. thanks, greg k-h
On Sat, Aug 03, 2024 at 03:46:07PM +0800, ZHANG Yuntian wrote: > Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip. > Signed-off-by: ZHANG Yuntian <yt@radxa.com> Now applied, thanks. Johan
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 311040f9b9352..6811dbd2f4c08 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -621,6 +621,8 @@ static void option_instat_callback(struct urb *urb); #define MEIGSMART_VENDOR_ID 0x2dee /* MeiG Smart SLM320 based on UNISOC UIS8910 */ #define MEIGSMART_PRODUCT_SLM320 0x4d41 +/* MeiG Smart SRM825L based on Qualcomm 315 */ +#define MEIGSMART_PRODUCT_SRM825L 0x4d22 /* Device flags */ @@ -2366,6 +2368,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, LUAT_PRODUCT_AIR720U, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SLM320, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SRM825L, 0xff, 0xff, 0x60) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids);
Add support for MeiG Smart SRM825L which is based on Qualcomm 315 chip. T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2dee ProdID=4d22 Rev= 4.14 S: Manufacturer=MEIG S: Product=LTE-A Module S: SerialNumber=6f345e48 C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: ZHANG Yuntian <yt@radxa.com> --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+)