@@ -116,8 +116,11 @@ static int xhci_mtk_host_enable(struct xhci_hcd_mtk *mtk)
writel(value, &ippc->u3_ctrl_p[i]);
}
- /* power on and enable all u2 ports */
+ /* power on and enable all u2 ports except skipped ones */
for (i = 0; i < mtk->num_u2_ports; i++) {
+ if (BIT(i) & mtk->u2p_dis_msk)
+ continue;
+
value = readl(&ippc->u2_ctrl_p[i]);
value &= ~(CTRL_U2_PORT_PDN | CTRL_U2_PORT_DIS);
value |= CTRL_U2_PORT_HOST_SEL;
@@ -164,8 +167,11 @@ static int xhci_mtk_host_disable(struct xhci_hcd_mtk *mtk)
writel(value, &ippc->u3_ctrl_p[i]);
}
- /* power down all u2 ports */
+ /* power down all u2 ports except skipped ones */
for (i = 0; i < mtk->num_u2_ports; i++) {
+ if (BIT(i) & mtk->u2p_dis_msk)
+ continue;
+
value = readl(&ippc->u2_ctrl_p[i]);
value |= CTRL_U2_PORT_PDN;
writel(value, &ippc->u2_ctrl_p[i]);
@@ -445,6 +451,8 @@ static int xhci_mtk_probe(struct platform_device *pdev)
/* optional property, ignore the error if it does not exist */
of_property_read_u32(node, "mediatek,u3p-dis-msk",
&mtk->u3p_dis_msk);
+ of_property_read_u32(node, "mediatek,u2p-dis-msk",
+ &mtk->u2p_dis_msk);
ret = usb_wakeup_of_property_parse(mtk, node);
if (ret) {
@@ -138,6 +138,7 @@ struct xhci_hcd_mtk {
struct mu3c_ippc_regs __iomem *ippc_regs;
int num_u2_ports;
int num_u3_ports;
+ int u2p_dis_msk;
int u3p_dis_msk;
struct regulator *vusb33;
struct regulator *vbus;
Add support to disable specific usb2 host ports, it's useful when a usb2 port is disabled on some platforms, but enabled on others for the same SoC. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- drivers/usb/host/xhci-mtk.c | 12 ++++++++++-- drivers/usb/host/xhci-mtk.h | 1 + 2 files changed, 11 insertions(+), 2 deletions(-)