diff mbox series

[17/30] usb: chipidea: udc: Fix a few kerneldoc issues

Message ID 20200703174148.2749969-18-lee.jones@linaro.org
State New
Headers show
Series Fix a bunch more W=1 issues in USB | expand

Commit Message

Lee Jones July 3, 2020, 5:41 p.m. UTC
Descriptions were missing for 'ci' almost throughout.  There was
one instance of over-documenting.  Finally one function argument
was incorrectly documented (probably down to bitrot).

Fixes the following W=1 kernel build warning(s):

 drivers/usb/chipidea/udc.c:245: warning: Function parameter or member 'ci' not described in 'hw_port_is_high_speed'
 drivers/usb/chipidea/udc.c:271: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_intr_active'
 drivers/usb/chipidea/udc.c:285: warning: Function parameter or member 'ci' not described in 'hw_test_and_clear_setup_guard'
 drivers/usb/chipidea/udc.c:296: warning: Function parameter or member 'ci' not described in 'hw_test_and_set_setup_guard'
 drivers/usb/chipidea/udc.c:321: warning: Function parameter or member 'ci' not described in 'hw_usb_reset'
 drivers/usb/chipidea/udc.c:628: warning: Excess function parameter 'ci' description in 'free_pending_td'
 drivers/usb/chipidea/udc.c:655: warning: Function parameter or member 'hwep' not described in '_hardware_dequeue'
 drivers/usb/chipidea/udc.c:655: warning: Excess function parameter 'gadget' description in '_hardware_dequeue'

Cc: Peter Chen <Peter.Chen@nxp.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

---
 drivers/usb/chipidea/udc.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

-- 
2.25.1
diff mbox series

Patch

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 0dfbc31843fc8..6a20ef396543b 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -238,6 +238,7 @@  static int hw_ep_set_halt(struct ci_hdrc *ci, int num, int dir, int value)
 
 /**
  * hw_is_port_high_speed: test if port is high speed
+ * @ci: the controller
  *
  * This function returns true if high speed port
  */
@@ -264,6 +265,7 @@  static int hw_test_and_clear_complete(struct ci_hdrc *ci, int n)
 /**
  * hw_test_and_clear_intr_active: test & clear active interrupts (execute
  *                                without interruption)
+ * @ci: the controller
  *
  * This function returns active interrutps
  */
@@ -278,6 +280,7 @@  static u32 hw_test_and_clear_intr_active(struct ci_hdrc *ci)
 /**
  * hw_test_and_clear_setup_guard: test & clear setup guard (execute without
  *                                interruption)
+ * @ci: the controller
  *
  * This function returns guard value
  */
@@ -289,6 +292,7 @@  static int hw_test_and_clear_setup_guard(struct ci_hdrc *ci)
 /**
  * hw_test_and_set_setup_guard: test & set setup guard (execute without
  *                              interruption)
+ * @ci: the controller
  *
  * This function returns guard value
  */
@@ -314,6 +318,7 @@  static void hw_usb_set_address(struct ci_hdrc *ci, u8 value)
 /**
  * hw_usb_reset: restart device after a bus reset (execute without
  *               interruption)
+ * @ci: the controller
  *
  * This function returns an error code
  */
@@ -621,7 +626,6 @@  static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
 
 /**
  * free_pending_td: remove a pending request for the endpoint
- * @ci: the controller
  * @hwep: endpoint
  */
 static void free_pending_td(struct ci_hw_ep *hwep)
@@ -646,7 +650,7 @@  static int reprime_dtd(struct ci_hdrc *ci, struct ci_hw_ep *hwep,
 
 /**
  * _hardware_dequeue: handles a request at hardware level
- * @gadget: gadget
+ * @hwep: endpoint
  * @hwreq:  request
  *
  * This function returns an error code