diff mbox series

[07/15] usb: misc: ezusb: update to use usb_control_msg_send()

Message ID 20201129160612.1908074-8-anant.thazhemadam@gmail.com
State Superseded
Headers show
Series [01/15] usb: misc: appledisplay: update to use the usb_control_msg_{send|recv}() API | expand

Commit Message

Anant Thazhemadam Nov. 29, 2020, 4:06 p.m. UTC
The newer usb_control_msg_{send|recv}() API are an improvement on the
existing usb_control_msg() as it ensures that a short read/write is treated
as an error, data can be used off the stack, and raw usb pipes need not be
created in the calling functions.
For this reason, the instance of usb_control_msg() has been replaced with
usb_control_msg_send() appropriately.

Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
---
 drivers/usb/misc/ezusb.c | 16 ++--------------
 1 file changed, 2 insertions(+), 14 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c
index f058d8029761..78aaee56c2b7 100644
--- a/drivers/usb/misc/ezusb.c
+++ b/drivers/usb/misc/ezusb.c
@@ -31,24 +31,12 @@  static const struct ezusb_fx_type ezusb_fx1 = {
 static int ezusb_writememory(struct usb_device *dev, int address,
 				unsigned char *data, int length, __u8 request)
 {
-	int result;
-	unsigned char *transfer_buffer;
-
 	if (!dev)
 		return -ENODEV;
 
-	transfer_buffer = kmemdup(data, length, GFP_KERNEL);
-	if (!transfer_buffer) {
-		dev_err(&dev->dev, "%s - kmalloc(%d) failed.\n",
-							__func__, length);
-		return -ENOMEM;
-	}
-	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
+	return usb_control_msg_send(dev, 0, request,
 				 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-				 address, 0, transfer_buffer, length, 3000);
-
-	kfree(transfer_buffer);
-	return result;
+				 address, 0, data, length, 3000, GFP_KERNEL);
 }
 
 static int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg,