diff mbox series

[3/6] thunderbolt: Fix typos in CLx enabling

Message ID 20220509201656.502-4-gil.fine@intel.com
State Superseded
Headers show
Series thunderbolt: CL1 support for USB4 and Titan Ridge | expand

Commit Message

Gil Fine May 9, 2022, 8:16 p.m. UTC
Fix few typos in CLx enabling.

Signed-off-by: Gil Fine <gil.fine@intel.com>
---
 drivers/thunderbolt/switch.c | 2 +-
 drivers/thunderbolt/tmu.c    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index 549523c9a543..42b7daaf9c4d 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -3485,7 +3485,7 @@  static int tb_switch_enable_cl0s(struct tb_switch *sw)
  * to improve performance. CLx is enabled only if both sides of the link
  * support CLx, and if both sides of the link are not configured as two
  * single lane links and only if the link is not inter-domain link. The
- * complete set of conditions is descibed in CM Guide 1.0 section 8.1.
+ * complete set of conditions is described in CM Guide 1.0 section 8.1.
  *
  * Return: Returns 0 on success or an error code on failure.
  */
diff --git a/drivers/thunderbolt/tmu.c b/drivers/thunderbolt/tmu.c
index e4a07a26f693..b656659d02fb 100644
--- a/drivers/thunderbolt/tmu.c
+++ b/drivers/thunderbolt/tmu.c
@@ -606,7 +606,7 @@  int tb_switch_tmu_enable(struct tb_switch *sw)
 /**
  * tb_switch_tmu_configure() - Configure the TMU rate and directionality
  * @sw: Router whose mode to change
- * @rate: Rate to configure Off/LowRes/HiFi
+ * @rate: Rate to configure Off/Normal/HiFi
  * @unidirectional: If uni-directional (bi-directional otherwise)
  *
  * Selects the rate of the TMU and directionality (uni-directional or