diff mbox series

[-next,v2,4/5] usb: musb: jz4740: Switch to use dev_err_probe() helper

Message ID 20220927072616.913672-5-yangyingliang@huawei.com
State New
Headers show
Series [-next,v2,1/5] usb: musb: core: Switch to use dev_err_probe() helper | expand

Commit Message

Yang Yingliang Sept. 27, 2022, 7:26 a.m. UTC
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
---
 drivers/usb/musb/jz4740.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index 417c30bff9ca..d1e4e0deb753 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -105,7 +105,6 @@  static int jz4740_musb_init(struct musb *musb)
 		.driver_data = glue,
 		.fwnode = dev_fwnode(dev),
 	};
-	int err;
 
 	glue->musb = musb;
 
@@ -113,12 +112,9 @@  static int jz4740_musb_init(struct musb *musb)
 		musb->xceiv = devm_usb_get_phy_by_phandle(dev, "phys", 0);
 	else
 		musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
-	if (IS_ERR(musb->xceiv)) {
-		err = PTR_ERR(musb->xceiv);
-		if (err != -EPROBE_DEFER)
-			dev_err(dev, "No transceiver configured: %d\n", err);
-		return err;
-	}
+	if (IS_ERR(musb->xceiv))
+		return dev_err_probe(dev, PTR_ERR(musb->xceiv),
+				     "No transceiver configured\n");
 
 	glue->role_sw = usb_role_switch_register(dev, &role_sw_desc);
 	if (IS_ERR(glue->role_sw)) {