From patchwork Tue Mar 14 07:00:01 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jarkko Sonninen X-Patchwork-Id: 663273 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 34F10C6FD1C for ; Tue, 14 Mar 2023 07:01:50 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230081AbjCNHBs (ORCPT ); Tue, 14 Mar 2023 03:01:48 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56872 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229468AbjCNHBr (ORCPT ); Tue, 14 Mar 2023 03:01:47 -0400 Received: from meesny.iki.fi (meesny.iki.fi [IPv6:2001:67c:2b0:1c1::201]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C1A5096F0B; Tue, 14 Mar 2023 00:01:44 -0700 (PDT) Received: from dungeon.fi (dungeon.fi [81.4.110.129]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) (Authenticated sender: kasper) by meesny.iki.fi (Postfix) with ESMTPSA id 4PbPZp6tBZzyQw; Tue, 14 Mar 2023 09:01:38 +0200 (EET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=iki.fi; s=meesny; t=1678777300; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=mBFiZRAVeT2FIrImO6sdWcu2f9xNpfHrJqo4KPXnuUU=; b=k8/NpawJ2Nc+UiODD/ZMIyENAzGF7FpxEsFQPAu8Efu4ANOI57RD77oELQhhIYhZRzuqy5 FkGAksrRlw+nZPMv4VUqcNOrT3wBkgkfoa/vOkh/Lj0gZ20+uo3J+C+fZAWHAGk2A2glNO PYAhyd1MuuFQDsK1G87p5p8UKfFuoy4= ARC-Seal: i=1; s=meesny; d=iki.fi; t=1678777300; a=rsa-sha256; cv=none; b=iOPlerZPy2WQ/KBj0HVFDAu9odixkiR+Ox9hPgO7FPxSXa/8DmSQhPCEa8IG5gITo2vfbD 8N2vk2MTO+z/V/Sa1Rrs8pqD+0e23GyIPXOOqPqWX+7sdcI65Ac7WZHUTvbfmFc0b31RLJ DGsGcpJY7ZBzay9F+dNpBcfOy1dPiXU= ARC-Authentication-Results: i=1; ORIGINATING; auth=pass smtp.auth=kasper smtp.mailfrom=kasper@iki.fi ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=iki.fi; s=meesny; t=1678777300; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=mBFiZRAVeT2FIrImO6sdWcu2f9xNpfHrJqo4KPXnuUU=; b=T6NNDtQZU//nN+NSIZ5wDI7e+8nmjZoVc/F9LzYmuA0OtVB07CBgN+ghFZarCeFlHcgXSI LEtcsYnkPEwHzeK3VZlu5dU8eNb2kSwBwGzraPSKFvfuBjk/sQGwVx3p2C0HFLOtpF1U0B bvCE8NjMx+2mPC6rqeRPLT456XeAEV8= Received: from gridbug.. (dktgsyyyyyyyyyyyyyyct-3.rev.dnainternet.fi [IPv6:2001:14ba:440a:f000::5]) by dungeon.fi (Postfix) with ESMTPSA id 0CF663F371; Tue, 14 Mar 2023 09:01:36 +0200 (EET) From: Jarkko Sonninen To: Jarkko Sonninen Cc: Johan Hovold , Greg Kroah-Hartman , linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v3] USB: serial: xr: Add TIOCGRS485 and TIOCSRS485 ioctls Date: Tue, 14 Mar 2023 09:00:01 +0200 Message-Id: <20230314070002.1008959-1-kasper@iki.fi> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230313010416.845252-1-kasper@iki.fi> References: <20230313010416.845252-1-kasper@iki.fi> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Add support for RS-485 in Exar USB adapters. RS-485 mode is controlled by TIOCGRS485 and TIOCSRS485 ioctls. Gpio mode register is set to enable RS-485. Signed-off-by: Jarkko Sonninen --- In this version only rs485.flags are stored to state. There is no locking as only one bit of the flags is used. ioctl returns -ENOIOCTLCMD as the actual error handling is in tty code. drivers/usb/serial/xr_serial.c | 62 +++++++++++++++++++++++++++++++++- 1 file changed, 61 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/xr_serial.c b/drivers/usb/serial/xr_serial.c index fdb0aae546c3..7b542ccb6596 100644 --- a/drivers/usb/serial/xr_serial.c +++ b/drivers/usb/serial/xr_serial.c @@ -93,6 +93,7 @@ struct xr_txrx_clk_mask { #define XR_GPIO_MODE_SEL_DTR_DSR 0x2 #define XR_GPIO_MODE_SEL_RS485 0x3 #define XR_GPIO_MODE_SEL_RS485_ADDR 0x4 +#define XR_GPIO_MODE_RS485_TX_H 0x8 #define XR_GPIO_MODE_TX_TOGGLE 0x100 #define XR_GPIO_MODE_RX_TOGGLE 0x200 @@ -237,6 +238,7 @@ static const struct xr_type xr_types[] = { struct xr_data { const struct xr_type *type; u8 channel; /* zero-based index or interface number */ + u32 rs485_flags; }; static int xr_set_reg(struct usb_serial_port *port, u8 channel, u16 reg, u16 val) @@ -645,9 +647,13 @@ static void xr_set_flow_mode(struct tty_struct *tty, /* Set GPIO mode for controlling the pins manually by default. */ gpio_mode &= ~XR_GPIO_MODE_SEL_MASK; + if (data->rs485_flags & SER_RS485_ENABLED) + gpio_mode |= XR_GPIO_MODE_SEL_RS485 | XR_GPIO_MODE_RS485_TX_H; + else if (C_CRTSCTS(tty) && C_BAUD(tty) != B0) + gpio_mode |= XR_GPIO_MODE_SEL_RTS_CTS; + if (C_CRTSCTS(tty) && C_BAUD(tty) != B0) { dev_dbg(&port->dev, "Enabling hardware flow ctrl\n"); - gpio_mode |= XR_GPIO_MODE_SEL_RTS_CTS; flow = XR_UART_FLOW_MODE_HW; } else if (I_IXON(tty)) { u8 start_char = START_CHAR(tty); @@ -827,6 +833,59 @@ static void xr_set_termios(struct tty_struct *tty, xr_set_flow_mode(tty, port, old_termios); } +static int xr_get_rs485_config(struct tty_struct *tty, + unsigned int __user *argp) +{ + struct usb_serial_port *port = tty->driver_data; + struct xr_data *data = usb_get_serial_port_data(port); + struct serial_rs485 rs485; + + dev_dbg(tty->dev, "Flags %02x\n", data->rs485_flags); + memset(&rs485, 0, sizeof(rs485)); + rs485.flags = data->rs485_flags; + if (copy_to_user(argp, &rs485, sizeof(rs485))) + return -EFAULT; + + return 0; +} + +static int xr_set_rs485_config(struct tty_struct *tty, + unsigned long __user *argp) +{ + struct usb_serial_port *port = tty->driver_data; + struct xr_data *data = usb_get_serial_port_data(port); + struct serial_rs485 rs485; + + if (copy_from_user(&rs485, argp, sizeof(rs485))) + return -EFAULT; + + dev_dbg(tty->dev, "Flags %02x\n", rs485.flags); + data->rs485_flags = rs485.flags & SER_RS485_ENABLED; + xr_set_flow_mode(tty, port, (const struct ktermios *)0); + + // Only the enable flag is implemented + memset(&rs485, 0, sizeof(rs485)); + rs485.flags = data->rs485_flags; + if (copy_to_user(argp, &rs485, sizeof(rs485))) + return -EFAULT; + + return 0; +} + + +static int xr_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + + switch (cmd) { + case TIOCGRS485: + return xr_get_rs485_config(tty, argp); + case TIOCSRS485: + return xr_set_rs485_config(tty, argp); + } + return -ENOIOCTLCMD; +} + static int xr_open(struct tty_struct *tty, struct usb_serial_port *port) { int ret; @@ -1010,6 +1069,7 @@ static struct usb_serial_driver xr_device = { .set_termios = xr_set_termios, .tiocmget = xr_tiocmget, .tiocmset = xr_tiocmset, + .ioctl = xr_ioctl, .dtr_rts = xr_dtr_rts };