new file mode 100644
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/fsl,scu-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: i.MX SCU Client Device Node - Clock bindings based on SCU Message Protocol
+
+maintainers:
+ - Abel Vesa <abel.vesa@nxp.com>
+
+description: i.MX SCU Client Device Node
+ Client nodes are maintained as children of the relevant IMX-SCU device node.
+ This binding uses the common clock binding.
+ (Documentation/devicetree/bindings/clock/clock-bindings.txt)
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell.
+ See the full list of clock IDs from
+ include/dt-bindings/clock/imx8qxp-clock.h
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - fsl,imx8dxl-clk
+ - fsl,imx8qm-clk
+ - fsl,imx8qxp-clk
+ - const: fsl,scu-clk
+
+ '#clock-cells':
+ const: 2
+
+ clocks:
+ items:
+ - description: XTAL 32KHz
+ - description: XTAL 24MHz
+ minItems: 1
+
+ clock-names:
+ items:
+ enum:
+ - xtal_32KHz
+ - xtal_24Mhz
+ minItems: 1
+ maxItems: 2
+
+required:
+ - compatible
+ - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ clock-controller {
+ compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
+ #clock-cells = <2>;
+ };