mbox series

[RFC,0/4] ARM: dts: Add Raspberry Pi Zero 2 W support

Message ID 1641068812-5851-1-git-send-email-stefan.wahren@i2se.com
Headers show
Series ARM: dts: Add Raspberry Pi Zero 2 W support | expand

Message

Stefan Wahren Jan. 1, 2022, 8:26 p.m. UTC 
This small series tries to add support for the Raspberry Pi Zero 2 W.

Stefan Wahren (4):
  brcmfmac: use separate firmware for 43430 revision 4
  dt-bindings: arm: bcm2835: Add Raspberry Pi Zero 2 W
  ARM: dts: Add Raspberry Pi Zero 2 W
  arm64: dts: broadcom: Add reference to RPi Zero 2 W

 .../devicetree/bindings/arm/bcm/bcm2835.yaml       |   1 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts         | 136 +++++++++++++++++++++
 arch/arm64/boot/dts/broadcom/Makefile              |   3 +-
 .../boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts     |   2 +
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    |   4 +-
 6 files changed, 145 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
 create mode 100644 arch/arm64/boot/dts/broadcom/bcm2837-rpi-zero-2-w.dts