mbox series

[0/9] ath9k: add support for QCN550x

Message ID 20220418071313.882179-1-wlooi@ucalgary.ca
Headers show
Series ath9k: add support for QCN550x | expand

Message

Wenli Looi April 18, 2022, 7:13 a.m. UTC
This patchset adds support for QCN550x. It is an attempt to write a
cleaner version of the following patch:

https://github.com/openwrt/openwrt/pull/9389

I'm definitely open to ideas on how to better implement this change.

Notes:

- While QCN5502 is a 4-stream device, ath9k only supports 3 streams, and
  that is unchanged.
- The QCN550x EEPROM format is different from other AR9003 devices due
  to the 4th stream. An abstraction layer has been added over the EEPROM
  to support both formats.
- The QCN550x initvals here are a hacked version of the QCA956x
  initvals, and have only been partially tested.
- This change has been tested on the following devices, which appear to
  work as an access point:
  - QCN5502: Netgear EX6400v2
  - QCA9558: Netgear EX7300v1

Relevant links:

- QCN550x SoC support, which appears to be identical to QCA956x:
  https://github.com/torvalds/linux/commit/a0b8cd5c223042efe764864b8dd9396ee127c763
- QSDK patch for QCN550x:
  https://source.codeaurora.org/quic/qsdk/oss/system/openwrt/tree/target/linux/ar71xx/patches-3.3/9991-MIPS-ath79-add-SoC-detection-code-for-QCN550X.patch?h=aa/banana

Wenli Looi (9):
  ath9k: add QCN550x device IDs
  ath9k: basic support for QCN550x
  ath9k: add QCN550x initvals
  ath9k: implement QCN550x rx
  ath9k: implement QCN550x tx
  ath9k: group some ar9300 eeprom functions at the top
  ath9k: add abstractions over ar9300 eeprom
  ath9k: rename ar9300_eeprom to ar9300_eeprom_v1
  ath9k: add ar9300_eeprom_v2

 drivers/net/wireless/ath/ath9k/ahb.c          |    4 +
 drivers/net/wireless/ath/ath9k/ani.c          |    2 +-
 .../net/wireless/ath/ath9k/ar550x_initvals.h  | 1296 +++++++++++++++++
 drivers/net/wireless/ath/ath9k/ar9003_calib.c |    4 +-
 .../net/wireless/ath/ath9k/ar9003_eeprom.c    |  949 ++++++++----
 .../net/wireless/ath/ath9k/ar9003_eeprom.h    |  144 +-
 drivers/net/wireless/ath/ath9k/ar9003_hw.c    |   59 +
 drivers/net/wireless/ath/ath9k/ar9003_mac.c   |   79 +-
 drivers/net/wireless/ath/ath9k/ar9003_mac.h   |   10 +
 drivers/net/wireless/ath/ath9k/ar9003_paprd.c |    4 +-
 drivers/net/wireless/ath/ath9k/ar9003_phy.c   |   35 +-
 drivers/net/wireless/ath/ath9k/ar9003_phy.h   |   83 +-
 drivers/net/wireless/ath/ath9k/hw.c           |   38 +-
 drivers/net/wireless/ath/ath9k/hw.h           |    4 +-
 drivers/net/wireless/ath/ath9k/mac.c          |    2 +-
 drivers/net/wireless/ath/ath9k/mac.h          |   12 +
 drivers/net/wireless/ath/ath9k/recv.c         |    2 +-
 drivers/net/wireless/ath/ath9k/reg.h          |   11 +-
 drivers/net/wireless/ath/ath9k/reg_aic.h      |    6 +-
 19 files changed, 2330 insertions(+), 414 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath9k/ar550x_initvals.h

Comments

Wenli Looi May 10, 2022, 6:39 p.m. UTC | #1
Thanks Kalle for the comments.

Please let me know if I should resend the patch with the minor changes
or if there are additional comments.

It would probably be ideal if this patch could be reviewed by someone
who is familiar with this device and could provide official initvals
like described here:

https://wireless.wiki.kernel.org/en/users/drivers/ath9k/initvals-tool#synch_initvals_from_the_atheros_hal

I would be happy to test other initvals on my device. The hacked
QCA956x initvals do appear to work stably for me though so this could
be done later.
Kalle Valo May 11, 2022, 4:39 a.m. UTC | #2
Wenli Looi <wlooi@ucalgary.ca> writes:

> Thanks Kalle for the comments.
>
> Please let me know if I should resend the patch with the minor changes
> or if there are additional comments.

The patchset is set to 'Changes Requested' in patchwork:

https://patchwork.kernel.org/project/linux-wireless/list/?series=632942&state=*&order=date

This means you need to submit v2.
Toke Høiland-Jørgensen May 11, 2022, 9:54 a.m. UTC | #3
Kalle Valo <kvalo@kernel.org> writes:

> Wenli Looi <wlooi@ucalgary.ca> writes:
>
>> Thanks Kalle for the comments.
>>
>> Please let me know if I should resend the patch with the minor changes
>> or if there are additional comments.
>
> The patchset is set to 'Changes Requested' in patchwork:
>
> https://patchwork.kernel.org/project/linux-wireless/list/?series=632942&state=*&order=date
>
> This means you need to submit v2.

Yes, please resubmit with Kalle's comments addressed :)

-Toke