mbox series

[v2,0/3] wifi: ath12k: Enable REO queue lookup table on QCN9274

Message ID 20250207173023.3856217-1-quic_nithp@quicinc.com
Headers show
Series wifi: ath12k: Enable REO queue lookup table on QCN9274 | expand

Message

Nithyanantham Paramasivam Feb. 7, 2025, 5:30 p.m. UTC 
Instead of storing the REO queue address inside peer entries, REO
hardware module prefers them to be stored in SRAM which could be
directly accessed by REO using peer_ID/TID based Lookup table(LUT)
mechanism. This feature is expected to improve stability by reduced
interaction between host and firmware during both MLO and non-MLO
operations.This feature is enabled only for the QCN9274, so it does
not impact the WCN7850.

v2:
- Removed junk version histories in cover letter

Balamurugan S (1):
  wifi: ath12k: Add support to clear qdesc array in REO cache

Nithyanantham Paramasivam (1):
  wifi: ath12k: Enable REO queue lookup table feature on QCN9274

Sriram R (1):
  wifi: ath12k: Fix the enabling of REO queue lookup table feature

 drivers/net/wireless/ath/ath12k/dp.c     | 79 ++++++++++++++++--------
 drivers/net/wireless/ath/ath12k/dp.h     |  7 ++-
 drivers/net/wireless/ath/ath12k/dp_rx.c  | 11 +++-
 drivers/net/wireless/ath/ath12k/hal.h    | 10 ++-
 drivers/net/wireless/ath/ath12k/hal_rx.c | 19 +++++-
 drivers/net/wireless/ath/ath12k/hw.c     |  6 +-
 drivers/net/wireless/ath/ath12k/hw.h     |  5 +-
 drivers/net/wireless/ath/ath12k/wmi.c    |  8 ++-
 drivers/net/wireless/ath/ath12k/wmi.h    |  1 +
 9 files changed, 110 insertions(+), 36 deletions(-)


base-commit: 48a62436540224f57013c27519dd2aa3ddd714c9