diff mbox series

[V3,9/9] ath11k: set the multiple bssid hw flags and capabilities

Message ID 20200812150050.2683396-10-john@phrozen.org
State New
Headers show
Series None | expand

Commit Message

John Crispin Aug. 12, 2020, 3 p.m. UTC 
This wraps up the support for multiple bssid and actually makes
the feature available.

Signed-off-by: John Crispin <john@phrozen.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 306f123c09a7..c4bd6b1a48c3 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -5999,19 +5999,23 @@  static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
 
 static const u8 ath11k_if_types_ext_capa[] = {
 	[0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING,
+	[2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT,
 	[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF,
 };
 
 static const u8 ath11k_if_types_ext_capa_sta[] = {
 	[0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING,
+	[2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT,
 	[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF,
 	[9] = WLAN_EXT_CAPA10_TWT_REQUESTER_SUPPORT,
 };
 
 static const u8 ath11k_if_types_ext_capa_ap[] = {
 	[0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING,
+	[2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT,
 	[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF,
 	[9] = WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT,
+	[11] = WLAN_EXT_CAPA11_EMA_SUPPORT,
 };
 
 static const struct wiphy_iftype_ext_capab ath11k_iftypes_ext_capa[] = {
@@ -6121,6 +6125,8 @@  static int __ath11k_mac_register(struct ath11k *ar)
 	ieee80211_hw_set(ar->hw, QUEUE_CONTROL);
 	ieee80211_hw_set(ar->hw, SUPPORTS_TX_FRAG);
 	ieee80211_hw_set(ar->hw, REPORTS_LOW_ACK);
+	ieee80211_hw_set(ar->hw, SUPPORTS_MULTI_BSSID);
+	ieee80211_hw_set(ar->hw, SUPPORTS_MULTI_BSSID_AP);
 	if (ht_cap & WMI_HT_CAP_ENABLED) {
 		ieee80211_hw_set(ar->hw, AMPDU_AGGREGATION);
 		ieee80211_hw_set(ar->hw, TX_AMPDU_SETUP_IN_HW);