diff mbox series

[v2,06/12] wcn36xx: Add wcn36xx_smd_set_sta_default_ht_ldpc_params()

Message ID 20200829033908.2167689-7-bryan.odonoghue@linaro.org
State Superseded
Headers show
Series wcn36xx: Add support for extended V1 SMD parameter passing | expand

Commit Message

Bryan O'Donoghue Aug. 29, 2020, 3:39 a.m. UTC
Toggling the LDPC enabled bit is possible only via the extended V1
data-structure. This function provides a means of setting the default
depending on chip-type.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

---
 drivers/net/wireless/ath/wcn36xx/smd.c | 9 +++++++++
 1 file changed, 9 insertions(+)

-- 
2.27.0


_______________________________________________
wcn36xx mailing list
wcn36xx@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/wcn36xx
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 45359e72a877..cf20a0f63259 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -206,6 +206,15 @@  static void wcn36xx_smd_set_sta_default_vht_params(struct wcn36xx *wcn,
 	sta_params->vht_tx_bf_enabled = 0;
 }
 
+static void wcn36xx_smd_set_sta_default_ht_ldpc_params(struct wcn36xx *wcn,
+		struct wcn36xx_hal_config_sta_params_v1 *sta_params)
+{
+	if (wcn->rf_id == RF_IRIS_WCN3680)
+		sta_params->ht_ldpc_enabled = 1;
+	else
+		sta_params->ht_ldpc_enabled = 0;
+}
+
 static void wcn36xx_smd_set_sta_params(struct wcn36xx *wcn,
 		struct ieee80211_vif *vif,
 		struct ieee80211_sta *sta,