@@ -33,9 +33,11 @@ EXPORT_SYMBOL(ath10k_debug_mask);
static unsigned int ath10k_cryptmode_param;
static bool uart_print;
static bool skip_otp;
-static bool rawmode;
static bool fw_diag_log;
+/* frame mode values are mapped as per enum ath10k_hw_txrx_mode */
+unsigned int ath10k_frame_mode = ATH10K_HW_TXRX_NATIVE_WIFI;
+
unsigned long ath10k_coredump_mask = BIT(ATH10K_FW_CRASH_DUMP_REGISTERS) |
BIT(ATH10K_FW_CRASH_DUMP_CE_DATA);
@@ -44,15 +46,16 @@ module_param_named(debug_mask, ath10k_debug_mask, uint, 0644);
module_param_named(cryptmode, ath10k_cryptmode_param, uint, 0644);
module_param(uart_print, bool, 0644);
module_param(skip_otp, bool, 0644);
-module_param(rawmode, bool, 0644);
module_param(fw_diag_log, bool, 0644);
+module_param_named(frame_mode, ath10k_frame_mode, uint, 0644);
module_param_named(coredump_mask, ath10k_coredump_mask, ulong, 0444);
MODULE_PARM_DESC(debug_mask, "Debugging mask");
MODULE_PARM_DESC(uart_print, "Uart target debugging");
MODULE_PARM_DESC(skip_otp, "Skip otp failure for calibration in testmode");
MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software");
-MODULE_PARM_DESC(rawmode, "Use raw 802.11 frame datapath");
+MODULE_PARM_DESC(frame_mode,
+ "Datapath frame mode (0: raw, 1: native wifi (default))");
MODULE_PARM_DESC(coredump_mask, "Bitfield of what to include in firmware crash file");
MODULE_PARM_DESC(fw_diag_log, "Diag based fw log debugging");
@@ -2599,7 +2602,7 @@ static int ath10k_core_init_firmware_features(struct ath10k *ar)
ar->htt.max_num_amsdu = ATH10K_HTT_MAX_NUM_AMSDU_DEFAULT;
ar->htt.max_num_ampdu = ATH10K_HTT_MAX_NUM_AMPDU_DEFAULT;
- if (rawmode) {
+ if (ath10k_frame_mode == ATH10K_HW_TXRX_RAW) {
if (!test_bit(ATH10K_FW_FEATURE_RAW_MODE_SUPPORT,
fw_file->fw_features)) {
ath10k_err(ar, "rawmode = 1 requires support from firmware");
@@ -1314,6 +1314,7 @@ static inline bool ath10k_peer_stats_enabled(struct ath10k *ar)
return false;
}
+extern unsigned int ath10k_frame_mode;
extern unsigned long ath10k_coredump_mask;
void ath10k_core_napi_sync_disable(struct ath10k *ar);
Turn boolean rawmode module param into integer frame_mode param that contains value from ath10k_hw_txrx_mode enum. As earlier the default param value is non-RAW (native Wi-Fi) encapsulation. The param name is selected to be consistent with the similar ath11k param. This is a preparation step for upcoming encapsulation offloading support. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> --- Changes since RFC: * changed position in series: #2 -> #3 * rebased on top of latest ath-next drivers/net/wireless/ath/ath10k/core.c | 11 +++++++---- drivers/net/wireless/ath/ath10k/core.h | 1 + 2 files changed, 8 insertions(+), 4 deletions(-)