diff mbox series

[v2,1/5] wifi: rtw89: add retry to change power_mode state

Message ID 20220819064811.37700-2-pkshih@realtek.com
State Superseded
Headers show
Series wifi: rtw89: correct MAC and PCI settings | expand

Commit Message

Ping-Ke Shih Aug. 19, 2022, 6:48 a.m. UTC
From: Chin-Yen Lee <timlee@realtek.com>

When starting to send heavy traffic in low power mode,
driver will call multiple tx wake notify to wake firmware
within a short time. In this situation, firmware may miss
power mode change request from driver and leads to status
error. So we change driver to call power_mode_change at most
three times to make sure firmware could get the request.

Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 drivers/net/wireless/realtek/rtw89/mac.c | 23 +++++++++++++++++------
 drivers/net/wireless/realtek/rtw89/mac.h |  1 +
 2 files changed, 18 insertions(+), 6 deletions(-)

Comments

Kalle Valo Sept. 2, 2022, 8:36 a.m. UTC | #1
Ping-Ke Shih <pkshih@realtek.com> wrote:

> From: Chin-Yen Lee <timlee@realtek.com>
> 
> When starting to send heavy traffic in low power mode,
> driver will call multiple tx wake notify to wake firmware
> within a short time. In this situation, firmware may miss
> power mode change request from driver and leads to status
> error. So we change driver to call power_mode_change at most
> three times to make sure firmware could get the request.
> 
> Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>

5 patches applied to wireless-next.git, thanks.

48c0e34755a1 wifi: rtw89: add retry to change power_mode state
704052f55ffe wifi: rtw89: 8852c: set TBTT shift configuration
8f308ae3342c wifi: rtw89: pci: fix PCI PHY auto adaption by using software restore
843059d8193c wifi: rtw89: pci: enable CLK_REQ, ASPM, L1 and L1ss for 8852c
9e3d242fd3b4 wifi: rtw89: pci: correct suspend/resume setting for variant chips
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtw89/mac.c b/drivers/net/wireless/realtek/rtw89/mac.c
index 93124b815825f..61c7e79714925 100644
--- a/drivers/net/wireless/realtek/rtw89/mac.c
+++ b/drivers/net/wireless/realtek/rtw89/mac.c
@@ -1053,18 +1053,29 @@  void rtw89_mac_power_mode_change(struct rtw89_dev *rtwdev, bool enter)
 	enum rtw89_rpwm_req_pwr_state state;
 	unsigned long delay = enter ? 10 : 150;
 	int ret;
+	int i;
 
 	if (enter)
 		state = rtw89_mac_get_req_pwr_state(rtwdev);
 	else
 		state = RTW89_MAC_RPWM_REQ_PWR_STATE_ACTIVE;
 
-	rtw89_mac_send_rpwm(rtwdev, state, false);
-	ret = read_poll_timeout_atomic(rtw89_mac_check_cpwm_state, ret, !ret,
-				       delay, 15000, false, rtwdev, state);
-	if (ret)
-		rtw89_err(rtwdev, "firmware failed to ack for %s ps mode\n",
-			  enter ? "entering" : "leaving");
+	for (i = 0; i < RPWM_TRY_CNT; i++) {
+		rtw89_mac_send_rpwm(rtwdev, state, false);
+		ret = read_poll_timeout_atomic(rtw89_mac_check_cpwm_state, ret,
+					       !ret, delay, 15000, false,
+					       rtwdev, state);
+		if (!ret)
+			break;
+
+		if (i == RPWM_TRY_CNT - 1)
+			rtw89_err(rtwdev, "firmware failed to ack for %s ps mode\n",
+				  enter ? "entering" : "leaving");
+		else
+			rtw89_debug(rtwdev, RTW89_DBG_UNEXP,
+				    "%d time firmware failed to ack for %s ps mode\n",
+				    i + 1, enter ? "entering" : "leaving");
+	}
 }
 
 void rtw89_mac_notify_wake(struct rtw89_dev *rtwdev)
diff --git a/drivers/net/wireless/realtek/rtw89/mac.h b/drivers/net/wireless/realtek/rtw89/mac.h
index f66619354734d..986e359a82237 100644
--- a/drivers/net/wireless/realtek/rtw89/mac.h
+++ b/drivers/net/wireless/realtek/rtw89/mac.h
@@ -11,6 +11,7 @@ 
 #define ADDR_CAM_ENT_SIZE  0x40
 #define BSSID_CAM_ENT_SIZE 0x08
 #define HFC_PAGE_UNIT 64
+#define RPWM_TRY_CNT 3
 
 enum rtw89_mac_hwmod_sel {
 	RTW89_DMAC_SEL = 0,