diff mbox series

[5/9] wifi: mt76: get rid of false alamrs of tx emission issues

Message ID 20230831062221.20027-5-shayne.chen@mediatek.com
State New
Headers show
Series [1/9] wifi: mt76: connac: add MBSSID support for mt7996 | expand

Commit Message

Shayne Chen Aug. 31, 2023, 6:22 a.m. UTC 
From: StanleyYP Wang <StanleyYP.Wang@mediatek.com>

When the set_chan_info command is set with CH_SWITCH_NORMAL reason,
even if the action is UNI_CHANNEL_RX_PATH, it'll still generate some
unexpected tones, which might confuse DFS CAC tests that there are some
tone leakages. To get rid of these kinds of false alarms, always bypass
DPD calibration when IEEE80211_CONF_IDLE is set.

Reviewed-by: Evelyn Tsai <evelyn.tsai@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 6 +++---
 drivers/net/wireless/mediatek/mt76/mt7996/mcu.c | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index f18dc777edcb..94a091dd155e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -2742,10 +2742,10 @@  int mt7915_mcu_set_chan_info(struct mt7915_phy *phy, int cmd)
 	if (mt76_connac_spe_idx(phy->mt76->antenna_mask))
 		req.tx_path_num = fls(phy->mt76->antenna_mask);
 
-	if (cmd == MCU_EXT_CMD(SET_RX_PATH) ||
-	    dev->mt76.hw->conf.flags & IEEE80211_CONF_MONITOR)
+	if (dev->mt76.hw->conf.flags & IEEE80211_CONF_MONITOR)
 		req.switch_reason = CH_SWITCH_NORMAL;
-	else if (phy->mt76->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
+	else if (phy->mt76->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL ||
+		 phy->mt76->hw->conf.flags & IEEE80211_CONF_IDLE)
 		req.switch_reason = CH_SWITCH_SCAN_BYPASS_DPD;
 	else if (!cfg80211_reg_can_beacon(phy->mt76->hw->wiphy, chandef,
 					  NL80211_IFTYPE_AP))
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
index 4de0c4a97fc4..ebd0a9a6310e 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
@@ -3182,10 +3182,10 @@  int mt7996_mcu_set_chan_info(struct mt7996_phy *phy, u16 tag)
 		.channel_band = ch_band[chandef->chan->band],
 	};
 
-	if (tag == UNI_CHANNEL_RX_PATH ||
-	    dev->mt76.hw->conf.flags & IEEE80211_CONF_MONITOR)
+	if (dev->mt76.hw->conf.flags & IEEE80211_CONF_MONITOR)
 		req.switch_reason = CH_SWITCH_NORMAL;
-	else if (phy->mt76->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)
+	else if (phy->mt76->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL ||
+		 phy->mt76->hw->conf.flags & IEEE80211_CONF_IDLE)
 		req.switch_reason = CH_SWITCH_SCAN_BYPASS_DPD;
 	else if (!cfg80211_reg_can_beacon(phy->mt76->hw->wiphy, chandef,
 					  NL80211_IFTYPE_AP))