diff mbox series

[v5,4/4] wifi: ath12k: Fill pdev id for fw test cmd

Message ID 20240624095305.37189-5-quic_aarasahu@quicinc.com
State New
Headers show
Series wifi: ath12k: Factory test mode support | expand

Commit Message

Aaradhana Sahu June 24, 2024, 9:53 a.m. UTC
From: Rajat Soni <quic_rajson@quicinc.com>

Currently pdev id is not set properly. That can cause a crash
if pdev id is not equal to the pdev id when firmware test
command is run during AP bring up or ping.

Set pdev id in function ath12k_tm_cmd_wmi to resolve this
issue.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00210-QCAHKSWPL_SILICONZ-1

Signed-off-by: Rajat Soni <quic_rajson@quicinc.com>
Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com>
---
 drivers/net/wireless/ath/ath12k/testmode.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/testmode.c b/drivers/net/wireless/ath/ath12k/testmode.c
index c334d64e839b..4d81ff2a174c 100644
--- a/drivers/net/wireless/ath/ath12k/testmode.c
+++ b/drivers/net/wireless/ath/ath12k/testmode.c
@@ -321,9 +321,10 @@  static int ath12k_tm_cmd_wmi(struct ath12k *ar, struct nlattr *tb[])
 {
 	struct ath12k_wmi_pdev *wmi = ar->wmi;
 	struct sk_buff *skb;
-	u32 cmd_id, buf_len;
-	int ret;
+	struct wmi_pdev_set_param_cmd *cmd;
+	int ret, tag;
 	void *buf;
+	u32 cmd_id, buf_len;
 
 	mutex_lock(&ar->conf_mutex);
 
@@ -348,6 +349,12 @@  static int ath12k_tm_cmd_wmi(struct ath12k *ar, struct nlattr *tb[])
 
 	cmd_id = nla_get_u32(tb[ATH_TM_ATTR_WMI_CMDID]);
 
+	cmd = buf;
+	tag = le32_get_bits(cmd->tlv_header, WMI_TLV_TAG);
+
+	if (tag == WMI_TAG_PDEV_SET_PARAM_CMD)
+		cmd->pdev_id = cpu_to_le32(ar->pdev->pdev_id);
+
 	ath12k_dbg(ar->ab, ATH12K_DBG_TESTMODE,
 		   "testmode cmd wmi cmd_id %d  buf length %d\n",
 		   cmd_id, buf_len);