diff mbox series

[v5,6/8] wifi: ath12k: delete NSS and TX power setting for monitor vdev

Message ID 20241018054620.2080-7-quic_kangyang@quicinc.com
State New
Headers show
Series wifi: ath12k: some fixes and clean up for monitor mode | expand

Commit Message

Kang Yang Oct. 18, 2024, 5:46 a.m. UTC 
ath12k_mac_monitor_vdev_create() will set NSS and TX power for monitor
vdev. But this is not needed for monitor vdev.

So delete them.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
---
 drivers/net/wireless/ath/ath12k/mac.c | 14 --------------
 1 file changed, 14 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath12k/mac.c b/drivers/net/wireless/ath/ath12k/mac.c
index c292ac45d780..d4b3c7899281 100644
--- a/drivers/net/wireless/ath/ath12k/mac.c
+++ b/drivers/net/wireless/ath/ath12k/mac.c
@@ -1147,7 +1147,6 @@  static int ath12k_mac_monitor_vdev_create(struct ath12k *ar)
 	struct ath12k_wmi_vdev_create_arg arg = {};
 	int bit, ret;
 	u8 tmp_addr[6];
-	u16 nss;
 
 	lockdep_assert_wiphy(ath12k_ar_to_hw(ar)->wiphy);
 
@@ -1187,19 +1186,6 @@  static int ath12k_mac_monitor_vdev_create(struct ath12k *ar)
 		return ret;
 	}
 
-	nss = hweight32(ar->cfg_tx_chainmask) ? : 1;
-	ret = ath12k_wmi_vdev_set_param_cmd(ar, ar->monitor_vdev_id,
-					    WMI_VDEV_PARAM_NSS, nss);
-	if (ret) {
-		ath12k_warn(ar->ab, "failed to set vdev %d chainmask 0x%x, nss %d :%d\n",
-			    ar->monitor_vdev_id, ar->cfg_tx_chainmask, nss, ret);
-		return ret;
-	}
-
-	ret = ath12k_mac_txpower_recalc(ar);
-	if (ret)
-		return ret;
-
 	ar->allocated_vdev_map |= 1LL << ar->monitor_vdev_id;
 	ar->ab->free_vdev_map &= ~(1LL << ar->monitor_vdev_id);
 	ar->num_created_vdevs++;