diff mbox series

[4/4] wifi: mt76: mt7996: Allow monitor enable if phy is already running.

Message ID 20250416002617.1328286-5-rory@candelatech.com
State New
Headers show
Series wifi: mt76: mt7996: rx filter fixes and improvements. | expand

Commit Message

Rory Little April 16, 2025, 12:26 a.m. UTC 
This path was being skipped if, for example, a monitor was created on
a phy which already contained a station.

Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: Rory Little <rory@candelatech.com>
---
 drivers/net/wireless/mediatek/mt76/mt7996/main.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/main.c b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
index cbc9826320a7..16314fdc090c 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/main.c
@@ -478,13 +478,14 @@  static int mt7996_add_interface(struct ieee80211_hw *hw,
 	for (i = 0; i < MT7996_MAX_RADIOS; i++) {
 		struct mt7996_phy *phy = dev->radio_phy[i];
 
-		if (!phy || !(wdev->radio_mask & BIT(i)) ||
-		    test_bit(MT76_STATE_RUNNING, &phy->mt76->state))
+		if (!phy || !(wdev->radio_mask & BIT(i)))
 			continue;
 
-		err = mt7996_run(phy);
-		if (err)
-			goto out;
+		if (!test_bit(MT76_STATE_RUNNING, &phy->mt76->state)) {
+			err = mt7996_run(phy);
+			if (err)
+				goto out;
+		}
 
 		if (vif->type == NL80211_IFTYPE_MONITOR)
 			mt7996_set_monitor(phy, true);