@@ -9826,3 +9826,63 @@ bool ath12k_wmi_supports_6ghz_cc_ext(struct ath12k *ar)
return test_bit(WMI_TLV_SERVICE_REG_CC_EXT_EVENT_SUPPORT,
ar->ab->wmi_ab.svc_map) && ar->supports_6ghz;
}
+
+int ath12k_wmi_send_vdev_set_tpc_power(struct ath12k *ar,
+ u32 vdev_id,
+ struct ath12k_reg_tpc_power_info *param)
+{
+ struct wmi_vdev_set_tpc_power_cmd *cmd;
+ struct ath12k_wmi_pdev *wmi = ar->wmi;
+ struct wmi_vdev_ch_power_params *ch;
+ int i, ret, len, array_len;
+ struct sk_buff *skb;
+ struct wmi_tlv *tlv;
+ u8 *ptr;
+
+ array_len = sizeof(*ch) * param->num_pwr_levels;
+ len = sizeof(*cmd) + TLV_HDR_SIZE + array_len;
+
+ skb = ath12k_wmi_alloc_skb(wmi->wmi_ab, len);
+ if (!skb)
+ return -ENOMEM;
+
+ ptr = skb->data;
+
+ cmd = (struct wmi_vdev_set_tpc_power_cmd *)ptr;
+ cmd->tlv_header = ath12k_wmi_tlv_cmd_hdr(WMI_TAG_VDEV_SET_TPC_POWER_CMD,
+ sizeof(*cmd));
+ cmd->vdev_id = cpu_to_le32(vdev_id);
+ cmd->psd_power = cpu_to_le32(param->is_psd_power);
+ cmd->eirp_power = cpu_to_le32(param->eirp_power);
+ cmd->power_type_6ghz = cpu_to_le32(param->ap_power_type);
+
+ ath12k_dbg(ar->ab, ATH12K_DBG_WMI,
+ "tpc vdev id %d is psd power %d eirp power %d 6 ghz power type %d\n",
+ vdev_id, param->is_psd_power, param->eirp_power, param->ap_power_type);
+
+ ptr += sizeof(*cmd);
+ tlv = (struct wmi_tlv *)ptr;
+ tlv->header = ath12k_wmi_tlv_hdr(WMI_TAG_ARRAY_STRUCT, array_len);
+
+ ptr += TLV_HDR_SIZE;
+ ch = (struct wmi_vdev_ch_power_params *)ptr;
+
+ for (i = 0; i < param->num_pwr_levels; i++, ch++) {
+ ch->tlv_header = ath12k_wmi_tlv_cmd_hdr(WMI_TAG_VDEV_CH_POWER_INFO,
+ sizeof(*ch));
+ ch->chan_cfreq = cpu_to_le32(param->chan_power_info[i].chan_cfreq);
+ ch->tx_power = cpu_to_le32(param->chan_power_info[i].tx_power);
+
+ ath12k_dbg(ar->ab, ATH12K_DBG_WMI, "tpc chan freq %d TX power %d\n",
+ ch->chan_cfreq, ch->tx_power);
+ }
+
+ ret = ath12k_wmi_cmd_send(wmi, skb, WMI_VDEV_SET_TPC_POWER_CMDID);
+ if (ret) {
+ ath12k_warn(ar->ab, "failed to send WMI_VDEV_SET_TPC_POWER_CMDID\n");
+ dev_kfree_skb(skb);
+ return ret;
+ }
+
+ return 0;
+}
@@ -26,6 +26,7 @@ struct ath12k_base;
struct ath12k;
struct ath12k_link_vif;
struct ath12k_fw_stats;
+struct ath12k_reg_tpc_power_info;
/* There is no signed version of __le32, so for a temporary solution come
* up with our own version. The idea is from fs/ntfs/endian.h.
@@ -386,6 +387,22 @@ enum wmi_tlv_cmd_id {
WMI_VDEV_SET_CUSTOM_AGGR_SIZE_CMDID,
WMI_VDEV_ENCRYPT_DECRYPT_DATA_REQ_CMDID,
WMI_VDEV_ADD_MAC_ADDR_TO_RX_FILTER_CMDID,
+ WMI_VDEV_SET_ARP_STAT_CMDID,
+ WMI_VDEV_GET_ARP_STAT_CMDID,
+ WMI_VDEV_GET_TX_POWER_CMDID,
+ WMI_VDEV_LIMIT_OFFCHAN_CMDID,
+ WMI_VDEV_SET_CUSTOM_SW_RETRY_TH_CMDID,
+ WMI_VDEV_CHAINMASK_CONFIG_CMDID,
+ WMI_VDEV_GET_BCN_RECEPTION_STATS_CMDID,
+ WMI_VDEV_GET_MWS_COEX_INFO_CMDID,
+ WMI_VDEV_DELETE_ALL_PEER_CMDID,
+ WMI_VDEV_BSS_MAX_IDLE_TIME_CMDID,
+ WMI_VDEV_AUDIO_SYNC_TRIGGER_CMDID,
+ WMI_VDEV_AUDIO_SYNC_QTIMER_CMDID,
+ WMI_VDEV_SET_PCL_CMDID,
+ WMI_VDEV_GET_BIG_DATA_CMDID,
+ WMI_VDEV_GET_BIG_DATA_P2_CMDID,
+ WMI_VDEV_SET_TPC_POWER_CMDID,
WMI_PEER_CREATE_CMDID = WMI_TLV_CMD(WMI_GRP_PEER),
WMI_PEER_DELETE_CMDID,
WMI_PEER_FLUSH_TIDS_CMDID,
@@ -1955,6 +1972,8 @@ enum wmi_tlv_tag {
WMI_TAG_TPC_STATS_REG_PWR_ALLOWED,
WMI_TAG_TPC_STATS_RATES_ARRAY,
WMI_TAG_TPC_STATS_CTL_PWR_TABLE_EVENT,
+ WMI_TAG_VDEV_SET_TPC_POWER_CMD = 0x3B5,
+ WMI_TAG_VDEV_CH_POWER_INFO,
WMI_TAG_EHT_RATE_SET = 0x3C4,
WMI_TAG_DCS_AWGN_INT_TYPE = 0x3C5,
WMI_TAG_MLO_TX_SEND_PARAMS,
@@ -5939,6 +5958,41 @@ struct wmi_tpc_stats_arg {
struct wmi_tpc_ctl_pwr_table_arg ctl_array;
};
+struct wmi_vdev_ch_power_params {
+ __le32 tlv_header;
+
+ /* Channel center frequency (MHz) */
+ __le32 chan_cfreq;
+
+ /* Unit: dBm, either PSD/EIRP power for this frequency or
+ * incremental for non-PSD BW
+ */
+ __le32 tx_power;
+} __packed;
+
+struct wmi_vdev_set_tpc_power_cmd {
+ __le32 tlv_header;
+ __le32 vdev_id;
+
+ /* Value: 0 or 1, is PSD power or not */
+ __le32 psd_power;
+
+ /* Maximum EIRP power (dBm units), valid only if power is PSD */
+ __le32 eirp_power;
+
+ /* Type: WMI_6GHZ_REG_TYPE, used for halphy CTL lookup */
+ __le32 power_type_6ghz;
+
+ /* This fixed_param TLV is followed by the below TLVs:
+ * num_pwr_levels of wmi_vdev_ch_power_info
+ * For PSD power, it is the PSD/EIRP power of the frequency (20 MHz chunks).
+ * For non-PSD power, the power values are for 20, 40, and till
+ * BSS BW power levels.
+ * The num_pwr_levels will be checked by sw how many elements present
+ * in the variable-length array.
+ */
+} __packed;
+
void ath12k_wmi_init_qcn9274(struct ath12k_base *ab,
struct ath12k_wmi_resource_config_arg *config);
void ath12k_wmi_init_wcn7850(struct ath12k_base *ab,
@@ -6134,5 +6188,8 @@ void ath12k_wmi_fw_stats_dump(struct ath12k *ar,
struct ath12k_fw_stats *fw_stats, u32 stats_id,
char *buf);
bool ath12k_wmi_supports_6ghz_cc_ext(struct ath12k *ar);
+int ath12k_wmi_send_vdev_set_tpc_power(struct ath12k *ar,
+ u32 vdev_id,
+ struct ath12k_reg_tpc_power_info *param);
#endif
Add the handler for WMI_VDEV_SET_TPC_POWER_CMDID, it is for 6 GHz band. A subsequent patch will call this handler to send power parameters to firmware. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> --- drivers/net/wireless/ath/ath12k/wmi.c | 60 +++++++++++++++++++++++++++++++++++ drivers/net/wireless/ath/ath12k/wmi.h | 57 +++++++++++++++++++++++++++++++++ 2 files changed, 117 insertions(+)