diff mbox series

[mt76-next,2/9] wifi: mt76: mt7996: fix beamformee SS field

Message ID 20250515032952.1653494-2-shayne.chen@mediatek.com
State New
Headers show
Series [mt76-next,1/9] wifi: mt76: remove capability of partial bandwidth UL MU-MIMO | expand

Commit Message

Shayne Chen May 15, 2025, 3:29 a.m. UTC 
From: Howard Hsu <howard-yh.hsu@mediatek.com>

Fix the beamformee SS field for the mt7996, mt7992 and mt7990 chipsets.
For the mt7992, this value shall be set to 0x4, while the others shall
be set to 0x3.

Fixes: 5b20557593d4 ("wifi: mt76: connac: adjust phy capabilities based on band constraints")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7996/init.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/init.c b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
index b77fa94df8c7..5c545293f294 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
@@ -1121,12 +1121,12 @@  mt7996_set_stream_he_txbf_caps(struct mt7996_phy *phy,
 
 	c = IEEE80211_HE_PHY_CAP4_SU_BEAMFORMEE;
 
-	if (is_mt7996(phy->mt76->dev))
-		c |= IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_4 |
-		     (IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_4 * non_2g);
-	else
+	if (is_mt7992(phy->mt76->dev))
 		c |= IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_5 |
 		     (IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_5 * non_2g);
+	else
+		c |= IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_4 |
+		     (IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_4 * non_2g);
 
 	elem->phy_cap_info[4] |= c;