diff mbox series

[2/7] brcmfmac: add firmware vendor info in driver data

Message ID CAJ65rDwH9SYhsTKM_4c6e0EN6qfp16kGVsVtSs0d+TNou=DF5g@mail.gmail.com
State New
Headers show
Series [1/7] brcmfmac: add function to unbind device to bus layer api | expand

Commit Message

Arend Van Spriel June 13, 2022, 9:19 a.m. UTC
In order to determine the vendor that released a firmware image for
a specific device, the device table now sets the vendor identifier
and it is stored in struct brcmf_bus::fwvid during probe.

Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
 .../broadcom/brcm80211/brcmfmac/bcmsdh.c      |  6 ++++-
 .../broadcom/brcm80211/brcmfmac/bus.h         | 11 +++++++-
 .../broadcom/brcm80211/brcmfmac/pcie.c        | 20 ++++++++++----
 .../broadcom/brcm80211/brcmfmac/usb.c         | 27 +++++++++++++------
 4 files changed, 49 insertions(+), 15 deletions(-)

 	struct brcmf_usbdev *bus_pub = NULL;
@@ -1278,6 +1279,7 @@ static int brcmf_usb_probe_cb(struct
brcmf_usbdev_info *devinfo)
 	dev_set_drvdata(dev, bus);
 	bus->ops = &brcmf_usb_bus_ops;
 	bus->proto_type = BRCMF_PROTO_BCDC;
+	bus->fwvid = fwvid;
 	bus->always_use_fws_queue = true;
 #ifdef CONFIG_PM
 	bus->wowl_supported = true;
@@ -1436,7 +1438,7 @@ brcmf_usb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
 	else
 		brcmf_dbg(USB, "Broadcom full speed USB WLAN interface detected\n");

-	ret = brcmf_usb_probe_cb(devinfo);
+	ret = brcmf_usb_probe_cb(devinfo, id->driver_info);
 	if (ret)
 		goto fail;

@@ -1524,14 +1526,23 @@ static int brcmf_usb_reset_resume(struct
usb_interface *intf)
 	return ret;
 }

-#define BRCMF_USB_DEVICE(dev_id)	\
-	{ USB_DEVICE(BRCM_USB_VENDOR_ID_BROADCOM, dev_id) }
+#define BRCMF_USB_DEVICE(dev_id) \
+	{ \
+		USB_DEVICE(BRCM_USB_VENDOR_ID_BROADCOM, dev_id), \
+		.driver_info = BRCMF_FWVENDOR_WCC \
+	}

-#define LINKSYS_USB_DEVICE(dev_id)	\
-	{ USB_DEVICE(BRCM_USB_VENDOR_ID_LINKSYS, dev_id) }
+#define LINKSYS_USB_DEVICE(dev_id) \
+	{ \
+		USB_DEVICE(BRCM_USB_VENDOR_ID_LINKSYS, dev_id), \
+		.driver_info = BRCMF_FWVENDOR_WCC \
+	}

-#define CYPRESS_USB_DEVICE(dev_id)	\
-	{ USB_DEVICE(CY_USB_VENDOR_ID_CYPRESS, dev_id) }
+#define CYPRESS_USB_DEVICE(dev_id) \
+	{ \
+		USB_DEVICE(CY_USB_VENDOR_ID_CYPRESS, dev_id), \
+		.driver_info = BRCMF_FWVENDOR_WCC \
+	}

 static const struct usb_device_id brcmf_usb_devid_table[] = {
 	BRCMF_USB_DEVICE(BRCM_USB_43143_DEVICE_ID),

Comments

Kalle Valo July 28, 2022, 9:31 a.m. UTC | #1
aspriel@gmail.com writes:

> In order to determine the vendor that released a firmware image for
> a specific device, the device table now sets the vendor identifier
> and it is stored in struct brcmf_bus::fwvid during probe.
>
> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
> Reviewed-by: Franky Lin <franky.lin@broadcom.com>
> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>

The patchwork page for this patch looks odd, but didn't investigate in
detail. Never seen that kind of parsing problems before:

https://patchwork.kernel.org/project/linux-wireless/patch/CAJ65rDwH9SYhsTKM_4c6e0EN6qfp16kGVsVtSs0d+TNou=DF5g@mail.gmail.com/
diff mbox series

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 9c598ea97499..5ec56567dab6 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -968,7 +968,10 @@  int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
 }

 #define BRCMF_SDIO_DEVICE(dev_id)	\
-	{SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, dev_id)}
+	{ \
+		SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, dev_id), \
+		.driver_data = BRCMF_FWVENDOR_WCC \
+	}

 /* devices we support, null terminated */
 static const struct sdio_device_id brcmf_sdmmc_ids[] = {
@@ -1058,6 +1061,7 @@  static int brcmf_ops_sdio_probe(struct sdio_func *func,
 	sdiodev->bus_if = bus_if;
 	bus_if->bus_priv.sdio = sdiodev;
 	bus_if->proto_type = BRCMF_PROTO_BCDC;
+	bus_if->fwvid = id->driver_data;
 	dev_set_drvdata(&func->dev, bus_if);
 	dev_set_drvdata(&sdiodev->func1->dev, bus_if);
 	sdiodev->dev = &sdiodev->func1->dev;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
index a9363de809ea..2008fde3ff4e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h
@@ -23,6 +23,13 @@ 
 #define BRCMF_NROF_COMMON_MSGRINGS	(BRCMF_NROF_H2D_COMMON_MSGRINGS + \
 					 BRCMF_NROF_D2H_COMMON_MSGRINGS)

+enum brcmf_fwvendor {
+	BRCMF_FWVENDOR_WCC,
+	/* keep last */
+	BRCMF_FWVENDOR_NUM,
+	BRCMF_FWVENDOR_INVALID
+};
+
 /* The level of bus communication with the dongle */
 enum brcmf_bus_state {
 	BRCMF_BUS_DOWN,		/* Not ready for frame transfers */
@@ -131,9 +138,10 @@  struct brcmf_bus_stats {
  * @stats: statistics shared between common and bus layer.
  * @maxctl: maximum size for rxctl request message.
  * @chip: device identifier of the dongle chip.
+ * @chiprev: revision of the dongle chip.
+ * @fwvid: firmware vendor-support identifier of the device.
  * @always_use_fws_queue: bus wants use queue also when fwsignal is inactive.
  * @wowl_supported: is wowl supported by bus driver.
- * @chiprev: revision of the dongle chip.
  * @msgbuf: msgbuf protocol parameters provided by bus layer.
  */
 struct brcmf_bus {
@@ -150,6 +158,7 @@  struct brcmf_bus {
 	uint maxctl;
 	u32 chip;
 	u32 chiprev;
+	enum brcmf_fwvendor fwvid;
 	bool always_use_fws_queue;
 	bool wowl_supported;

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 97f0f13dfe50..0599dad96018 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -1910,6 +1910,7 @@  brcmf_pcie_probe(struct pci_dev *pdev, const
struct pci_device_id *id)
 	bus->bus_priv.pcie = pcie_bus_dev;
 	bus->ops = &brcmf_pcie_bus_ops;
 	bus->proto_type = BRCMF_PROTO_MSGBUF;
+	bus->fwvid = id->driver_data;
 	bus->chip = devinfo->coreid;
 	bus->wowl_supported = pci_pme_capable(pdev, PCI_D3hot);
 	dev_set_drvdata(&pdev->dev, bus);
@@ -2076,11 +2077,20 @@  static const struct dev_pm_ops brcmf_pciedrvr_pm = {
 #endif /* CONFIG_PM */


-#define BRCMF_PCIE_DEVICE(dev_id)	{ BRCM_PCIE_VENDOR_ID_BROADCOM, dev_id,\
-	PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, 0 }
-#define BRCMF_PCIE_DEVICE_SUB(dev_id, subvend, subdev)	{ \
-	BRCM_PCIE_VENDOR_ID_BROADCOM, dev_id,\
-	subvend, subdev, PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, 0 }
+#define BRCMF_PCIE_DEVICE(dev_id) \
+	{ \
+		BRCM_PCIE_VENDOR_ID_BROADCOM, (dev_id), \
+		PCI_ANY_ID, PCI_ANY_ID, \
+		PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, \
+		BRCMF_FWVENDOR_WCC \
+	}
+#define BRCMF_PCIE_DEVICE_SUB(dev_id, subvend, subdev) \
+	{ \
+		BRCM_PCIE_VENDOR_ID_BROADCOM, (dev_id), \
+		(subvend), (subdev), \
+		PCI_CLASS_NETWORK_OTHER << 8, 0xffff00, \
+		BRCMF_FWVENDOR_WCC \
+	}

 static const struct pci_device_id brcmf_pcie_devid_table[] = {
 	BRCMF_PCIE_DEVICE(BRCM_PCIE_4350_DEVICE_ID),
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
index 9fb68c2dc7e3..e34523c8a275 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -1253,7 +1253,8 @@  brcmf_usb_prepare_fw_request(struct
brcmf_usbdev_info *devinfo)
 	return fwreq;
 }

-static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
+static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo,
+			      enum brcmf_fwvendor fwvid)
 {
 	struct brcmf_bus *bus = NULL;