mbox series

[0/4] Utilization estimation (util_est) for FAIR tasks

Message ID 20171109164117.19401-1-patrick.bellasi@arm.com
Headers show
Series Utilization estimation (util_est) for FAIR tasks | expand


Patrick Bellasi Nov. 9, 2017, 4:41 p.m. UTC
The aim of this series is to improve some PELT behaviors to make it a
better fit for the scheduling of tasks common in embedded mobile
use-cases, without affecting other classes of workloads.

A complete description of these behavior has been presented in the
previous RFC [1] and further discussed at last OSPM Summit [2] as well
as the last two LPCs.

This series presents an implementation which improves the initial RFC's
prototype. Specifically, this new implementation has been verified to
not impact in any noticeable way the performance of:

    perf bench sched messaging --pipe --thread --group 8 --loop 50000

when running 30 iterations on a dual socket, 10 cores (20 threads) per
socket Intel(R) Xeon(R) CPU E5-2690 v2 @ 3.00GHz, whith the
sched_feat(SCHED_UTILEST) set to False.
With this feature enabled, the measured overhead is in the range of ~1%
on the HW/SW test configuration.

That's the main reason why this sched feature is disabled by default.
A possible improvement can be the addition of a KConfig option to toggle
the sched_feat default value on systems where a 1% overhead on hackbench
is not a concern, e.g. mobile systems, especially considering the
benefits coming from estimated utilization on workloads of interest.

From a functional standpoint, this implementation shows a more stable
utilization signal, compared to mainline, when running synthetics
benchmarks describing a set of interesting target use-cases.
This allows a better selection of the target CPU as well as a faster
selection of the most appropriate OPP.
A detailed description of the functional tests used has been already
covered in the previous RFC [1].

This series is based on v4.14-rc8 and is composed of four patches:
 1) a small refactoring preparing the ground
 2) introducing the required data structures to track util_est of both
    TASKs and CPUs
 3) make use of util_est in the wakeup and load balance paths
 4) make use of util_est in schedutil for frequency selection

Cheers Patrick

.:: References
[1] https://lkml.org/lkml/2017/8/25/195
[2] slides: http://retis.sssup.it/ospm-summit/Downloads/OSPM_PELT_DecayClampingVsUtilEst.pdf
     video: http://youtu.be/adnSHPBGS-w

Patrick Bellasi (4):
  sched/fair: always used unsigned long for utilization
  sched/fair: add util_est on top of PELT
  sched/fair: use util_est in LB and WU paths
  sched/cpufreq_schedutil: use util_est for OPP selection

 include/linux/sched.h            |  21 +++++
 kernel/sched/cpufreq_schedutil.c |   6 +-
 kernel/sched/debug.c             |   4 +
 kernel/sched/fair.c              | 184 ++++++++++++++++++++++++++++++++++++---
 kernel/sched/features.h          |   5 ++
 kernel/sched/sched.h             |   1 +
 6 files changed, 209 insertions(+), 12 deletions(-)



Dietmar Eggemann Dec. 1, 2017, 9:29 a.m. UTC | #1
Hi Patrick,

On 11/09/2017 05:41 PM, Patrick Bellasi wrote:


> This series is based on v4.14-rc8 and is composed of four patches:

Could you rebase this onto v4.15-rc1 or tip/sched/core so we have the 
patch-set 'sched/fair: A bit of a cgroup/PELT overhaul' underneath.

-- Dietmar