| Message ID | 20180302083123.7259-1-ard.biesheuvel@linaro.org |
|---|---|
| Headers | show |
| Series | add support for Socionext SynQuacer I2C controller | expand |
On 10 March 2018 at 15:01, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote: > On 2 March 2018 at 08:31, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote: >> Add a binding and a driver for the I2C IP found in the Socionext SynQuacer >> SoC, which is essentially a rebranded version of the Fujitsu F_I2C controller. >> >> I think this is good to go now. Wolfram? >> > > Ping? > Ping? >> v5: >> - add Rob's ack to #1 >> - drop unnecessary 'platform_set_drvdata(pdev, NULL)' in remove path (#2) >> >> v4: >> - clarify binding that only a single interrupt specifier is expected (#1) >> - check return value of clk_prepare_enable() on probe path (#2) >> - add Andy's R-b to patch #2 >> >> v3: >> - incorporate more of Andy's review comments (#2), especially regarding the >> bus speed and clock source handling for ACPI >> - patch #1 unchanged. >> >> v2: >> - incorporate Andy's review comments (#2) >> - patch #1 unchanged. >> >> Ard Biesheuvel (2): >> dt-bindings: i2c: add binding for Socionext SynQuacer I2C >> i2c: add support for Socionext SynQuacer I2C controller >> >> Documentation/devicetree/bindings/i2c/i2c-synquacer.txt | 29 + >> drivers/i2c/busses/Kconfig | 10 + >> drivers/i2c/busses/Makefile | 1 + >> drivers/i2c/busses/i2c-synquacer.c | 791 ++++++++++++++++++++ >> 4 files changed, 831 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-synquacer.txt >> create mode 100644 drivers/i2c/busses/i2c-synquacer.c >> >> -- >> 2.11.0 >>