mbox series

[0/7] clk: meson: axg-audio: add sm1 support

Message ID 20190924153356.24103-1-jbrunet@baylibre.com
Headers show
Series clk: meson: axg-audio: add sm1 support | expand

Message

Jerome Brunet Sept. 24, 2019, 3:33 p.m. UTC 
The purpose of this patchset is to add the sm1 support to the amlogic audio
clock controller. The line count is lot higher than what I hoped for. Even
if extremely similar, there is a shift in the register address on the sm1
which makes a bit of a mess.

I could have patched the address on the fly if running on sm1 but the end
result did not save much lines and would have been a pain to maintain and
scale in the future

Instead I choose to re-arrange the driver to share the macros and declare
separate clocks for the clock which have changed.

Jerome Brunet (7):
  dt-bindings: clk: axg-audio: add sm1 bindings
  dt-bindings: clock: meson: add sm1 resets to the axg-audio controller
  clk: meson: axg-audio: remove useless defines
  clk: meson: axg-audio: fix regmap last register
  clk: meson: axg-audio: prepare sm1 addition
  clk: meson: axg-audio: provide clk top signal name
  clk: meson: axg_audio: add sm1 support

 .../bindings/clock/amlogic,axg-audio-clkc.txt |    3 +-
 drivers/clk/meson/axg-audio.c                 | 2021 +++++++++++------
 drivers/clk/meson/axg-audio.h                 |   21 +-
 include/dt-bindings/clock/axg-audio-clkc.h    |   10 +
 .../reset/amlogic,meson-g12a-audio-reset.h    |   15 +
 5 files changed, 1373 insertions(+), 697 deletions(-)

-- 
2.21.0