diff mbox series

[v1,2/3] dt: Document for the ZTE zx296718 I2S controller

Message ID 1486389020-29432-2-git-send-email-baoyou.xie@linaro.org
State New
Headers show
Series None | expand

Commit Message

Baoyou Xie Feb. 6, 2017, 1:50 p.m. UTC 
This patch documents the devicetree for the ZTE's zx296718
I2S audio controller.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>

---
 Documentation/devicetree/bindings/sound/zte,zx-i2s.txt | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

-- 
2.7.4
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
index 7e5aa6f..c405561 100644
--- a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
@@ -1,10 +1,12 @@ 
 ZTE ZX296702 I2S controller
 
 Required properties:
- - compatible : Must be "zte,zx296702-i2s"
+ - compatible : Should include one of the following strings:
+	"zte,zx296702-i2s","zte,zx296718-i2s".
  - reg : Must contain I2S core's registers location and length
  - clocks : Pairs of phandle and specifier referencing the controller's clocks.
- - clock-names: "tx" for the clock to the I2S interface.
+ - clock-names: "tx" for the wclk, "pclk" for the pclk to the I2S interface.
+	must contain pclk for zx296718 SoC.
  - dmas: Pairs of phandle and specifier for the DMA channel that is used by
    the core. The core expects two dma channels for transmit.
  - dma-names : Must be "tx" and "rx"