diff mbox series

[05/11] mtd: rawnand: denali: rename irq_status to irq_stat

Message ID 1549613335-30319-6-git-send-email-yamada.masahiro@socionext.com
State New
Headers show
Series mtd: rawnand: denali: exec_op(), controller/chip separation, and cleanups | expand

Commit Message

Masahiro Yamada Feb. 8, 2019, 8:08 a.m. UTC 
I will add the third argument to denali_wait_for_irq() in the
following commit. Then, some lines will exceed 80 columns.

Rename 'irq_status' to 'irq_stat'. Saving two characters will avoid
line-wrapping in some places, and keep the code clean.

I replaced uint32_t with u32 in the touched lines. This will reduce
the reports from 'scripts/checkpatch.pl --strict'.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

---

 drivers/mtd/nand/raw/denali.c | 60 +++++++++++++++++++++----------------------
 drivers/mtd/nand/raw/denali.h |  4 +--
 2 files changed, 32 insertions(+), 32 deletions(-)

-- 
2.7.4

Comments

Miquel Raynal Feb. 8, 2019, 9:57 p.m. UTC | #1 
Hi Masahiro,

Masahiro Yamada <yamada.masahiro@socionext.com> wrote on Fri,  8 Feb
2019 17:08:49 +0900:

> I will add the third argument to denali_wait_for_irq() in the

> following commit. Then, some lines will exceed 80 columns.

> 

> Rename 'irq_status' to 'irq_stat'. Saving two characters will avoid

> line-wrapping in some places, and keep the code clean.


I had a look at the changes and I don't think this is worth the
trouble. I don't find irq_stat meaningful enough compared to
irq_status. If you want, you may break lines between arguments of a
function instead.

> 

> I replaced uint32_t with u32 in the touched lines. This will reduce

> the reports from 'scripts/checkpatch.pl --strict'.


While you are at it, it might be interesting to convert the whole
driver in one go to using u8, u16 and u32?

Thanks,
Miquèl
Masahiro Yamada Feb. 11, 2019, 1:15 a.m. UTC | #2 
Hi Miquel,

On Sat, Feb 9, 2019 at 6:57 AM Miquel Raynal <miquel.raynal@bootlin.com> wrote:
>

> Hi Masahiro,

>

> Masahiro Yamada <yamada.masahiro@socionext.com> wrote on Fri,  8 Feb

> 2019 17:08:49 +0900:

>

> > I will add the third argument to denali_wait_for_irq() in the

> > following commit. Then, some lines will exceed 80 columns.

> >

> > Rename 'irq_status' to 'irq_stat'. Saving two characters will avoid

> > line-wrapping in some places, and keep the code clean.

>

> I had a look at the changes and I don't think this is worth the

> trouble. I don't find irq_stat meaningful enough compared to

> irq_status. If you want, you may break lines between arguments of a

> function instead.


OK, I will drop this patch from v2.


> >

> > I replaced uint32_t with u32 in the touched lines. This will reduce

> > the reports from 'scripts/checkpatch.pl --strict'.

>

> While you are at it, it might be interesting to convert the whole

> driver in one go to using u8, u16 and u32?


I did this in 11/11.
http://patchwork.ozlabs.org/patch/1038507/

I will move all uint32_t -> u32 conversions to the last patch
if this is worthwhile.


Thanks.

> Thanks,

> Miquèl

>

> ______________________________________________________

> Linux MTD discussion mailing list

> http://lists.infradead.org/mailman/listinfo/linux-mtd/




-- 
Best Regards
Masahiro Yamada
diff mbox series

Patch

diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index bd7df25..9e63cbd 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -121,10 +121,10 @@  static void denali_disable_irq(struct denali_nand_info *denali)
 }
 
 static void denali_clear_irq(struct denali_nand_info *denali,
-			     int bank, uint32_t irq_status)
+			     int bank, u32 irq_stat)
 {
 	/* write one to clear bits */
-	iowrite32(irq_status, denali->reg + INTR_STATUS(bank));
+	iowrite32(irq_stat, denali->reg + INTR_STATUS(bank));
 }
 
 static void denali_clear_irq_all(struct denali_nand_info *denali)
@@ -139,24 +139,24 @@  static irqreturn_t denali_isr(int irq, void *dev_id)
 {
 	struct denali_nand_info *denali = dev_id;
 	irqreturn_t ret = IRQ_NONE;
-	uint32_t irq_status;
+	u32 irq_stat;
 	int i;
 
 	spin_lock(&denali->irq_lock);
 
 	for (i = 0; i < DENALI_NR_BANKS; i++) {
-		irq_status = ioread32(denali->reg + INTR_STATUS(i));
-		if (irq_status)
+		irq_stat = ioread32(denali->reg + INTR_STATUS(i));
+		if (irq_stat)
 			ret = IRQ_HANDLED;
 
-		denali_clear_irq(denali, i, irq_status);
+		denali_clear_irq(denali, i, irq_stat);
 
 		if (i != denali->active_bank)
 			continue;
 
-		denali->irq_status |= irq_status;
+		denali->irq_stat |= irq_stat;
 
-		if (denali->irq_status & denali->irq_mask)
+		if (denali->irq_stat & denali->irq_mask)
 			complete(&denali->complete);
 	}
 
@@ -170,7 +170,7 @@  static void denali_reset_irq(struct denali_nand_info *denali)
 	unsigned long flags;
 
 	spin_lock_irqsave(&denali->irq_lock, flags);
-	denali->irq_status = 0;
+	denali->irq_stat = 0;
 	denali->irq_mask = 0;
 	spin_unlock_irqrestore(&denali->irq_lock, flags);
 }
@@ -179,16 +179,16 @@  static uint32_t denali_wait_for_irq(struct denali_nand_info *denali,
 				    uint32_t irq_mask)
 {
 	unsigned long time_left, flags;
-	uint32_t irq_status;
+	u32 irq_stat;
 
 	spin_lock_irqsave(&denali->irq_lock, flags);
 
-	irq_status = denali->irq_status;
+	irq_stat = denali->irq_stat;
 
-	if (irq_mask & irq_status) {
+	if (irq_mask & irq_stat) {
 		/* return immediately if the IRQ has already happened. */
 		spin_unlock_irqrestore(&denali->irq_lock, flags);
-		return irq_status;
+		return irq_stat;
 	}
 
 	denali->irq_mask = irq_mask;
@@ -203,7 +203,7 @@  static uint32_t denali_wait_for_irq(struct denali_nand_info *denali,
 		return 0;
 	}
 
-	return denali->irq_status;
+	return denali->irq_stat;
 }
 
 static void denali_select_target(struct nand_chip *chip, int cs)
@@ -294,7 +294,7 @@  static int denali_sw_ecc_fixup(struct nand_chip *chip,
 	unsigned int err_byte, err_sector, err_device;
 	uint8_t err_cor_value;
 	unsigned int prev_sector = 0;
-	uint32_t irq_status;
+	u32 irq_stat;
 
 	denali_reset_irq(denali);
 
@@ -349,8 +349,8 @@  static int denali_sw_ecc_fixup(struct nand_chip *chip,
 	 * Once handle all ECC errors, controller will trigger an
 	 * ECC_TRANSACTION_DONE interrupt.
 	 */
-	irq_status = denali_wait_for_irq(denali, INTR__ECC_TRANSACTION_DONE);
-	if (!(irq_status & INTR__ECC_TRANSACTION_DONE))
+	irq_stat = denali_wait_for_irq(denali, INTR__ECC_TRANSACTION_DONE);
+	if (!(irq_stat & INTR__ECC_TRANSACTION_DONE))
 		return -EIO;
 
 	return max_bitflips;
@@ -408,7 +408,7 @@  static int denali_pio_read(struct denali_nand_info *denali, u32 *buf,
 			   size_t size, int page)
 {
 	u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page;
-	uint32_t irq_status, ecc_err_mask;
+	u32 irq_stat, ecc_err_mask;
 	int i;
 
 	if (denali->caps & DENALI_CAP_HW_ECC_FIXUP)
@@ -421,21 +421,21 @@  static int denali_pio_read(struct denali_nand_info *denali, u32 *buf,
 	for (i = 0; i < size / 4; i++)
 		buf[i] = denali->host_read(denali, addr);
 
-	irq_status = denali_wait_for_irq(denali, INTR__PAGE_XFER_INC);
-	if (!(irq_status & INTR__PAGE_XFER_INC))
+	irq_stat = denali_wait_for_irq(denali, INTR__PAGE_XFER_INC);
+	if (!(irq_stat & INTR__PAGE_XFER_INC))
 		return -EIO;
 
-	if (irq_status & INTR__ERASED_PAGE)
+	if (irq_stat & INTR__ERASED_PAGE)
 		memset(buf, 0xff, size);
 
-	return irq_status & ecc_err_mask ? -EBADMSG : 0;
+	return irq_stat & ecc_err_mask ? -EBADMSG : 0;
 }
 
 static int denali_pio_write(struct denali_nand_info *denali, const u32 *buf,
 			    size_t size, int page)
 {
 	u32 addr = DENALI_MAP01 | DENALI_BANK(denali) | page;
-	uint32_t irq_status;
+	u32 irq_stat;
 	int i;
 
 	denali_reset_irq(denali);
@@ -443,9 +443,9 @@  static int denali_pio_write(struct denali_nand_info *denali, const u32 *buf,
 	for (i = 0; i < size / 4; i++)
 		denali->host_write(denali, addr, buf[i]);
 
-	irq_status = denali_wait_for_irq(denali,
+	irq_stat = denali_wait_for_irq(denali,
 				INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL);
-	if (!(irq_status & INTR__PROGRAM_COMP))
+	if (!(irq_stat & INTR__PROGRAM_COMP))
 		return -EIO;
 
 	return 0;
@@ -464,7 +464,7 @@  static int denali_dma_xfer(struct denali_nand_info *denali, void *buf,
 			   size_t size, int page, int write)
 {
 	dma_addr_t dma_addr;
-	uint32_t irq_mask, irq_status, ecc_err_mask;
+	u32 irq_mask, irq_stat, ecc_err_mask;
 	enum dma_data_direction dir = write ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
 	int ret = 0;
 
@@ -501,17 +501,17 @@  static int denali_dma_xfer(struct denali_nand_info *denali, void *buf,
 	denali_reset_irq(denali);
 	denali->setup_dma(denali, dma_addr, page, write);
 
-	irq_status = denali_wait_for_irq(denali, irq_mask);
-	if (!(irq_status & INTR__DMA_CMD_COMP))
+	irq_stat = denali_wait_for_irq(denali, irq_mask);
+	if (!(irq_stat & INTR__DMA_CMD_COMP))
 		ret = -EIO;
-	else if (irq_status & ecc_err_mask)
+	else if (irq_stat & ecc_err_mask)
 		ret = -EBADMSG;
 
 	iowrite32(0, denali->reg + DMA_ENABLE);
 
 	dma_unmap_single(denali->dev, dma_addr, size, dir);
 
-	if (irq_status & INTR__ERASED_PAGE)
+	if (irq_stat & INTR__ERASED_PAGE)
 		memset(buf, 0xff, size);
 
 	return ret;
diff --git a/drivers/mtd/nand/raw/denali.h b/drivers/mtd/nand/raw/denali.h
index c8c2620..46296f2 100644
--- a/drivers/mtd/nand/raw/denali.h
+++ b/drivers/mtd/nand/raw/denali.h
@@ -299,9 +299,9 @@  struct denali_nand_info {
 	void __iomem *reg;		/* Register Interface */
 	void __iomem *host;		/* Host Data/Command Interface */
 	struct completion complete;
-	spinlock_t irq_lock;		/* protect irq_mask and irq_status */
+	spinlock_t irq_lock;		/* protect irq_mask and irq_stat */
 	u32 irq_mask;			/* interrupts we are waiting for */
-	u32 irq_status;			/* interrupts that have happened */
+	u32 irq_stat;			/* interrupts that have happened */
 	int irq;
 	void *buf;			/* for syndrome layout conversion */
 	int dma_avail;			/* can support DMA? */