diff mbox series

[1/3] extcon: gpio: Localize platform data

Message ID 20180212085314.23014-1-linus.walleij@linaro.org
State Accepted
Commit 66afdedf269cf485efb5affb30c34e1f37705445
Headers show
Series [1/3] extcon: gpio: Localize platform data | expand

Commit Message

Linus Walleij Feb. 12, 2018, 8:53 a.m. UTC
Nothing in the entire kernel #includes <linux/extcon/extcon-gpio.h>
so move the platform data declaration inside of the driver.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
 drivers/extcon/extcon-gpio.c       | 22 +++++++++++++++++-
 include/linux/extcon/extcon-gpio.h | 47 --------------------------------------
 2 files changed, 21 insertions(+), 48 deletions(-)
 delete mode 100644 include/linux/extcon/extcon-gpio.h

-- 
2.14.3
diff mbox series

Patch

diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index ab770adcca7e..5f88f36cc54e 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -18,7 +18,6 @@ 
  */
 
 #include <linux/extcon-provider.h>
-#include <linux/extcon/extcon-gpio.h>
 #include <linux/gpio.h>
 #include <linux/gpio/consumer.h>
 #include <linux/init.h>
@@ -29,6 +28,27 @@ 
 #include <linux/slab.h>
 #include <linux/workqueue.h>
 
+/**
+ * struct gpio_extcon_pdata - A simple GPIO-controlled extcon device.
+ * @extcon_id:		The unique id of specific external connector.
+ * @gpio:		Corresponding GPIO.
+ * @gpio_active_low:	Boolean describing whether gpio active state is 1 or 0
+ *			If true, low state of gpio means active.
+ *			If false, high state of gpio means active.
+ * @debounce:		Debounce time for GPIO IRQ in ms.
+ * @irq_flags:		IRQ Flags (e.g., IRQF_TRIGGER_LOW).
+ * @check_on_resume:	Boolean describing whether to check the state of gpio
+ *			while resuming from sleep.
+ */
+struct gpio_extcon_pdata {
+	unsigned int extcon_id;
+	unsigned gpio;
+	bool gpio_active_low;
+	unsigned long debounce;
+	unsigned long irq_flags;
+	bool check_on_resume;
+};
+
 struct gpio_extcon_data {
 	struct extcon_dev *edev;
 	int irq;
diff --git a/include/linux/extcon/extcon-gpio.h b/include/linux/extcon/extcon-gpio.h
deleted file mode 100644
index 7cacafb78b09..000000000000
--- a/include/linux/extcon/extcon-gpio.h
+++ /dev/null
@@ -1,47 +0,0 @@ 
-/*
- * Single-state GPIO extcon driver based on extcon class
- *
- * Copyright (C) 2012 Samsung Electronics
- * Author: MyungJoo Ham <myungjoo.ham@samsung.com>
- *
- * based on switch class driver
- * Copyright (C) 2008 Google, Inc.
- * Author: Mike Lockwood <lockwood@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#ifndef __EXTCON_GPIO_H__
-#define __EXTCON_GPIO_H__ __FILE__
-
-#include <linux/extcon.h>
-
-/**
- * struct gpio_extcon_pdata - A simple GPIO-controlled extcon device.
- * @extcon_id:		The unique id of specific external connector.
- * @gpio:		Corresponding GPIO.
- * @gpio_active_low:	Boolean describing whether gpio active state is 1 or 0
- *			If true, low state of gpio means active.
- *			If false, high state of gpio means active.
- * @debounce:		Debounce time for GPIO IRQ in ms.
- * @irq_flags:		IRQ Flags (e.g., IRQF_TRIGGER_LOW).
- * @check_on_resume:	Boolean describing whether to check the state of gpio
- *			while resuming from sleep.
- */
-struct gpio_extcon_pdata {
-	unsigned int extcon_id;
-	unsigned gpio;
-	bool gpio_active_low;
-	unsigned long debounce;
-	unsigned long irq_flags;
-
-	bool check_on_resume;
-};
-
-#endif /* __EXTCON_GPIO_H__ */