From patchwork Sun Apr 22 23:07:39 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 133936 Delivered-To: patch@linaro.org Received: by 10.46.151.6 with SMTP id r6csp368502lji; Sun, 22 Apr 2018 16:10:37 -0700 (PDT) X-Google-Smtp-Source: AIpwx48PGei1zYJAW1pE5ULRWrNu48QiKowLADRIc9/yXs3z50XUcMwLJX6WQuaCVmF0gqovYogX X-Received: by 10.101.92.77 with SMTP id v13mr4929231pgr.428.1524438636834; Sun, 22 Apr 2018 16:10:36 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1524438636; cv=none; d=google.com; s=arc-20160816; b=ZDFwMUmnQoB8QZIIpbMK4RPuSA8RwONZH+6f9NZulvPGJo00B08wDnnATmKBXFKrml pvgGjTcB3YsX+a6zhPzj3AVLw3A/370ysa+Y8j0SNaE6HImLOIgzaiKaRrsTh7JT+kK7 LCl0vUoiBiLqK6LzOGFJQ7gRvgGO9C+yb3wQRb90yMLievbq/K/wiDm1z6044xVotgm0 +FH1hSiXBeBvX/pGxZi/hCRaggEQiXeDiO3Ab2lkph99ksxh8Lwk/78sRhUVm4nn9UXt bQMWiKXRZYH3pqBudKk5fdgAH/GBSfalUFR0PKWrzYQ3yit4Cg3Vng3YumJLICIZY6H7 gbkQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:references:in-reply-to:message-id:date :subject:cc:to:from:dkim-signature:arc-authentication-results; bh=7lu/rWwGQbKb7bVzPwXI5PyKD/rOyTNHgO3o59dLuQA=; b=PV4cOOOz2D4WrLskMiYZvLmTXUAufkVqRDhDk+cNSxsBAu+mXbfHct8YrA6pv4hI2n EiATlcyoC8gnohqG5urDd4ch6TyY3gD38Kg4NbEio6IzvrB8C+KTa8xpuAyCtdWOVq8P qhCcbsKoqv3Xf2JkeQ0iehv8tA8MqCq9MhT323+Rk0TqJTxF0fPoyQEHmZl38l6j21oG 2vMso1FAZt/13361In8n9uVggQhwZVAuxCTXNptm7QZ3xRL9t6lsBQqi2KPxffbzAwQr 1Y9cLHt6Z0afM1lWSuv3v7LPDVxzuhO9tZlSbOtDM5UX/ALriGOEEBMFt3y7hjWMfr6+ hB4w== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=Pv1nMVEx; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id p15si9001536pgf.358.2018.04.22.16.10.36; Sun, 22 Apr 2018 16:10:36 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=Pv1nMVEx; spf=pass (google.com: best guess record for domain of linux-kernel-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753962AbeDVXKe (ORCPT + 29 others); Sun, 22 Apr 2018 19:10:34 -0400 Received: from mail-lf0-f67.google.com ([209.85.215.67]:37633 "EHLO mail-lf0-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753921AbeDVXK0 (ORCPT ); Sun, 22 Apr 2018 19:10:26 -0400 Received: by mail-lf0-f67.google.com with SMTP id b23-v6so12252294lfg.4 for ; Sun, 22 Apr 2018 16:10:25 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=7lu/rWwGQbKb7bVzPwXI5PyKD/rOyTNHgO3o59dLuQA=; b=Pv1nMVExba1jNsS4YM99uwsNZTLSet3wxYgo6/uDjn1fIY42BlXPgArZxc2UX5fTNs v+1AxnjxH3AZmSBHFjAhSH1USi74AnL7XP98vwoZxhhUNRu45SzH2exrx/zyR1MUaOGD Bu7JHCuvOQ3XfMBdN6MLgsnSvgYfjo4sfwxhA= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=7lu/rWwGQbKb7bVzPwXI5PyKD/rOyTNHgO3o59dLuQA=; b=PKqnDn4wX/KLdb5X/aayQt7AEDc1PTYI+OmNGEPslW1401+4+x/g6yrcAw6tn4LPgU fJuieFWMf/V+nTQSywQCPTPuhq667x9JNRvOmji3eQvXkSaMeGX+8l3ipmSXvZaylplz xOYIZbwCFfxsxUJc+D4CcrnlKTGZkJQv3EchCnkCk+TNtUabOpmZM+7o3qXLhlxFjS2G l6TntbJS5I5z/IFx1OZrS6qKhWYESO6fBAUwdWavJ/iq2e826A5HdAP6+L8Y0Gz/NuD4 NcYMpVhdFCvkjiSRA4xhvZ2+Do2aIkPxDy9LilrfX4C6IB5GtR8Te5OPMbZKEns0ldf+ yTmQ== X-Gm-Message-State: ALQs6tALxC0CPorCKhZWbUz1rnDxURNr1ROuFSxO9cSWpNIRfve1XZam uzaUaj5gzuuEV11vjvgtDCSiQg== X-Received: by 2002:a19:59c5:: with SMTP id n188-v6mr7221616lfb.53.1524438624318; Sun, 22 Apr 2018 16:10:24 -0700 (PDT) Received: from localhost.localdomain (c-ae7b71d5.014-348-6c756e10.cust.bredbandsbolaget.se. [213.113.123.174]) by smtp.gmail.com with ESMTPSA id r25sm2036291ljc.8.2018.04.22.16.10.22 (version=TLS1_2 cipher=ECDHE-RSA-CHACHA20-POLY1305 bits=256/256); Sun, 22 Apr 2018 16:10:23 -0700 (PDT) From: Linus Walleij To: Liam Girdwood , Mark Brown Cc: linux-kernel@vger.kernel.org, Linus Walleij , Alexander Shiyan , Haojian Zhuang , Aaro Koskinen , Tony Lindgren , Mike Rapoport , Robert Jarzmik , Philipp Zabel , Daniel Mack , Marc Zyngier , Geert Uytterhoeven , Russell King Subject: [PATCH 15/18 v2] regulator: fixed/gpio: Pull inversion/OD into gpiolib Date: Mon, 23 Apr 2018 01:07:39 +0200 Message-Id: <20180422230742.3729-15-linus.walleij@linaro.org> X-Mailer: git-send-email 2.14.3 In-Reply-To: <20180422230742.3729-1-linus.walleij@linaro.org> References: <20180422230742.3729-1-linus.walleij@linaro.org> Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This pushes the handling of inversion semantics and open drain settings to the GPIO descriptor and gpiolib. All affected board files are also augmented. This is especiallt nice since we don't have to have any confusing flags passed around to the left and right littering the fixed and GPIO regulator drivers and the regulator core. It is all just very straight-forward: the core asks the GPIO line to be asserted or deasserted and gpiolib deals with the rest depending on how the platform is configured: if the line is active low, it deals with that, if the line is open drain, it deals with that too. Cc: Alexander Shiyan # i.MX boards user Cc: Haojian Zhuang # MMP2 maintainer Cc: Aaro Koskinen # OMAP1 maintainer Cc: Tony Lindgren # OMAP1,2,3 maintainer Cc: Mike Rapoport # EM-X270 maintainer Cc: Robert Jarzmik # EZX maintainer Cc: Philipp Zabel # Magician maintainer Cc: Daniel Mack # Raumfeld maintainer Cc: Marc Zyngier # Zeus maintainer Cc: Geert Uytterhoeven # SuperH pinctrl/GPIO maintainer Cc: Russell King # SA1100 Signed-off-by: Linus Walleij --- ChangeLog v1->v2: - Rebase the patch series - Cover the new user added in sa1100 --- arch/arm/mach-imx/mach-mx21ads.c | 1 - arch/arm/mach-imx/mach-mx27ads.c | 2 +- arch/arm/mach-mmp/brownstone.c | 1 - arch/arm/mach-omap1/board-ams-delta.c | 1 - arch/arm/mach-omap2/pdata-quirks.c | 1 - arch/arm/mach-pxa/em-x270.c | 1 - arch/arm/mach-pxa/ezx.c | 3 +-- arch/arm/mach-pxa/hx4700.c | 3 +-- arch/arm/mach-pxa/magician.c | 3 +-- arch/arm/mach-pxa/raumfeld.c | 1 - arch/arm/mach-pxa/zeus.c | 3 +-- arch/arm/mach-sa1100/assabet.c | 1 - arch/sh/boards/mach-ecovec24/setup.c | 2 -- .../intel-mid/device_libs/platform_bcm43xx.c | 1 - drivers/regulator/core.c | 8 ++---- drivers/regulator/da9055-regulator.c | 1 - drivers/regulator/fixed.c | 30 ++++++---------------- drivers/regulator/gpio-regulator.c | 24 +++++++---------- include/linux/regulator/fixed.h | 10 -------- include/linux/regulator/gpio-regulator.h | 3 --- 20 files changed, 24 insertions(+), 76 deletions(-) -- 2.14.3 diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 5d3b6b4fe6db..8c4a4920468a 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -205,7 +205,6 @@ static struct regulator_init_data mx21ads_lcd_regulator_init_data = { static struct fixed_voltage_config mx21ads_lcd_regulator_pdata = { .supply_name = "LCD", .microvolts = 3300000, - .enable_high = 1, .init_data = &mx21ads_lcd_regulator_init_data, }; diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 0fdb88db0cbd..08a7e217b9e6 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -237,7 +237,7 @@ static struct fixed_voltage_config mx27ads_lcd_regulator_pdata = { static struct gpiod_lookup_table mx27ads_lcd_regulator_gpiod_table = { .dev_id = "reg-fixed-voltage.0", /* Let's hope ID 0 is what we get */ .table = { - GPIO_LOOKUP("LCD", 0, "enable", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("LCD", 0, "enable", GPIO_ACTIVE_LOW), { }, }, }; diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index 563b5a278d65..502343b32c7f 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -149,7 +149,6 @@ static struct regulator_init_data brownstone_v_5vp_data = { static struct fixed_voltage_config brownstone_v_5vp = { .supply_name = "v_5vp", .microvolts = 5000000, - .enable_high = 1, .enabled_at_boot = 1, .init_data = &brownstone_v_5vp_data, }; diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 759fa18f6ab4..22e94da4af85 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -275,7 +275,6 @@ static struct fixed_voltage_config modem_nreset_config = { .supply_name = "modem_nreset", .microvolts = 3300000, .startup_delay = 25000, - .enable_high = 1, .enabled_at_boot = 1, .init_data = &modem_nreset_data, }; diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 7d1447204fb8..1c740c7e7c55 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -332,7 +332,6 @@ static struct fixed_voltage_config pandora_vwlan = { .supply_name = "vwlan", .microvolts = 1800000, /* 1.8V */ .startup_delay = 50000, /* 50ms */ - .enable_high = 1, .init_data = &pandora_vmmc3, }; diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 6d7d93981098..8d9ec158f118 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -987,7 +987,6 @@ static struct fixed_voltage_config camera_dummy_config = { .supply_name = "camera_vdd", .input_supply = "vcc cam", .microvolts = 2800000, - .enable_high = 0, .init_data = &camera_dummy_initdata, }; diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index 2b4bd6d94855..13ebdfd697cc 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -714,7 +714,6 @@ static struct regulator_init_data camera_regulator_initdata = { static struct fixed_voltage_config camera_regulator_config = { .supply_name = "camera_vdd", .microvolts = 2800000, - .enable_high = 0, .init_data = &camera_regulator_initdata, }; @@ -730,7 +729,7 @@ static struct gpiod_lookup_table camera_supply_gpiod_table = { .dev_id = "reg-fixed-voltage.1", .table = { GPIO_LOOKUP("gpio-pxa", GPIO50_nCAM_EN, - "enable", GPIO_ACTIVE_HIGH), + "enable", GPIO_ACTIVE_LOW), { }, }, }; diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 6717a10180eb..05148016c620 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -712,7 +712,6 @@ static struct gpio_regulator_state bq24022_states[] = { static struct gpio_regulator_config bq24022_info = { .supply_name = "bq24022", - .enable_high = 0, .enabled_at_boot = 0, .gpios = bq24022_gpios, @@ -737,7 +736,7 @@ static struct gpiod_lookup_table bq24022_gpiod_table = { .dev_id = "gpio-regulator", .table = { GPIO_LOOKUP("gpio-pxa", GPIO72_HX4700_BQ24022_nCHARGE_EN, - "enable", GPIO_ACTIVE_HIGH), + "enable", GPIO_ACTIVE_LOW), { }, }, }; diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index 9a5bda3ea194..fab63c52d50e 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -657,7 +657,6 @@ static struct gpio_regulator_state bq24022_states[] = { static struct gpio_regulator_config bq24022_info = { .supply_name = "bq24022", - .enable_high = 0, .enabled_at_boot = 1, .gpios = bq24022_gpios, @@ -682,7 +681,7 @@ static struct gpiod_lookup_table bq24022_gpiod_table = { .dev_id = "gpio-regulator", .table = { GPIO_LOOKUP("gpio-pxa", GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, - "enable", GPIO_ACTIVE_HIGH), + "enable", GPIO_ACTIVE_LOW), { }, }, }; diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index ee766e4ebddc..30ea27b85bb0 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -886,7 +886,6 @@ static struct regulator_init_data audio_va_initdata = { static struct fixed_voltage_config audio_va_config = { .supply_name = "audio_va", .microvolts = 5000000, - .enable_high = 1, .enabled_at_boot = 0, .init_data = &audio_va_initdata, }; diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 58e05afcece0..428c2db6818a 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -426,7 +426,7 @@ static struct gpiod_lookup_table can_regulator_gpiod_table = { .dev_id = "reg-fixed-voltage.0", .table = { GPIO_LOOKUP("gpio-pxa", ZEUS_CAN_SHDN_GPIO, - "enable", GPIO_ACTIVE_HIGH), + "enable", GPIO_ACTIVE_LOW), { }, }, }; @@ -547,7 +547,6 @@ static struct regulator_init_data zeus_ohci_regulator_data = { static struct fixed_voltage_config zeus_ohci_regulator_config = { .supply_name = "vbus2", .microvolts = 5000000, /* 5.0V */ - .enable_high = 1, .startup_delay = 0, .init_data = &zeus_ohci_regulator_data, }; diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index dbb53c520165..705196a4b66f 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -468,7 +468,6 @@ static struct regulator_consumer_supply assabet_cf_vcc_consumers[] = { static struct fixed_voltage_config assabet_cf_vcc_pdata __initdata = { .supply_name = "cf-power", .microvolts = 3300000, - .enable_high = 1, }; static struct gpiod_lookup_table assabet_cf_vcc_gpio_table = { diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index c296b5c399b7..6b9542616447 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -633,7 +633,6 @@ static struct regulator_init_data cn12_power_init_data = { static struct fixed_voltage_config cn12_power_info = { .supply_name = "CN12 SD/MMC Vdd", .microvolts = 3300000, - .enable_high = 1, .init_data = &cn12_power_init_data, }; @@ -674,7 +673,6 @@ static struct regulator_init_data sdhi0_power_init_data = { static struct fixed_voltage_config sdhi0_power_info = { .supply_name = "CN11 SD/MMC Vdd", .microvolts = 3300000, - .enable_high = 1, .init_data = &sdhi0_power_init_data, }; diff --git a/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c b/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c index fc77d69e51d7..8a579aad0b27 100644 --- a/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c +++ b/arch/x86/platform/intel-mid/device_libs/platform_bcm43xx.c @@ -44,7 +44,6 @@ static struct fixed_voltage_config bcm43xx_vmmc = { */ .microvolts = 2000000, /* 1.8V */ .startup_delay = 250 * 1000, /* 250ms */ - .enable_high = 1, /* active high */ .enabled_at_boot = 0, /* disabled at boot */ .init_data = &bcm43xx_vmmc_data, }; diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 8d56f9b906b0..f3050eaa0a7e 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -79,7 +79,6 @@ struct regulator_enable_gpio { struct gpio_desc *gpiod; u32 enable_count; /* a number of enabled shared GPIO */ u32 request_count; /* a number of requested shared GPIO */ - unsigned int ena_gpio_invert:1; }; /* @@ -1949,7 +1948,6 @@ static int regulator_ena_gpio_request(struct regulator_dev *rdev, return -ENOMEM; pin->gpiod = gpiod; - pin->ena_gpio_invert = config->ena_gpio_invert; list_add(&pin->list, ®ulator_ena_gpio_list); update_ena_gpio_to_rdev: @@ -1999,8 +1997,7 @@ static int regulator_ena_gpio_ctrl(struct regulator_dev *rdev, bool enable) if (enable) { /* Enable GPIO at initial use */ if (pin->enable_count == 0) - gpiod_set_value_cansleep(pin->gpiod, - !pin->ena_gpio_invert); + gpiod_set_value_cansleep(pin->gpiod, 1); pin->enable_count++; } else { @@ -2011,8 +2008,7 @@ static int regulator_ena_gpio_ctrl(struct regulator_dev *rdev, bool enable) /* Disable GPIO if not used */ if (pin->enable_count <= 1) { - gpiod_set_value_cansleep(pin->gpiod, - pin->ena_gpio_invert); + gpiod_set_value_cansleep(pin->gpiod, 0); pin->enable_count = 0; } } diff --git a/drivers/regulator/da9055-regulator.c b/drivers/regulator/da9055-regulator.c index f40c3b8644ae..1a384258d0e5 100644 --- a/drivers/regulator/da9055-regulator.c +++ b/drivers/regulator/da9055-regulator.c @@ -457,7 +457,6 @@ static int da9055_gpio_init(struct da9055_regulator *regulator, int gpio_mux = pdata->gpio_ren[id]; config->ena_gpiod = pdata->ena_gpiods[id]; - config->ena_gpio_invert = 1; /* * GPI pin is muxed with regulator to control the diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c index 1142f195529b..8c479cdb69a9 100644 --- a/drivers/regulator/fixed.c +++ b/drivers/regulator/fixed.c @@ -79,10 +79,6 @@ of_get_fixed_voltage_config(struct device *dev, of_property_read_u32(np, "startup-delay-us", &config->startup_delay); - config->enable_high = of_property_read_bool(np, "enable-active-high"); - config->gpio_is_open_drain = of_property_read_bool(np, - "gpio-open-drain"); - if (of_find_property(np, "vin-supply", NULL)) config->input_supply = "vin"; @@ -146,24 +142,14 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev) drvdata->desc.fixed_uV = config->microvolts; - cfg.ena_gpio_invert = !config->enable_high; - if (config->enabled_at_boot) { - if (config->enable_high) - gflags = GPIOD_OUT_HIGH; - else - gflags = GPIOD_OUT_LOW; - } else { - if (config->enable_high) - gflags = GPIOD_OUT_LOW; - else - gflags = GPIOD_OUT_HIGH; - } - if (config->gpio_is_open_drain) { - if (gflags == GPIOD_OUT_HIGH) - gflags = GPIOD_OUT_HIGH_OPEN_DRAIN; - else - gflags = GPIOD_OUT_LOW_OPEN_DRAIN; - } + /* + * The signal will be inverted by the GPIO core if flagged so in the + * decriptor. + */ + if (config->enabled_at_boot) + gflags = GPIOD_OUT_HIGH; + else + gflags = GPIOD_OUT_LOW; cfg.ena_gpiod = devm_gpiod_get_optional(&pdev->dev, NULL, gflags); if (IS_ERR(cfg.ena_gpiod)) diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c index 9d6094c4d71c..16ef08406739 100644 --- a/drivers/regulator/gpio-regulator.c +++ b/drivers/regulator/gpio-regulator.c @@ -154,9 +154,6 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np, config->supply_name = config->init_data->constraints.name; - if (of_property_read_bool(np, "enable-active-high")) - config->enable_high = true; - if (of_property_read_bool(np, "enable-at-boot")) config->enabled_at_boot = true; @@ -338,18 +335,15 @@ static int gpio_regulator_probe(struct platform_device *pdev) cfg.driver_data = drvdata; cfg.of_node = np; - cfg.ena_gpio_invert = !config->enable_high; - if (config->enabled_at_boot) { - if (config->enable_high) - gflags = GPIOD_OUT_HIGH; - else - gflags = GPIOD_OUT_LOW; - } else { - if (config->enable_high) - gflags = GPIOD_OUT_LOW; - else - gflags = GPIOD_OUT_HIGH; - } + /* + * The signal will be inverted by the GPIO core if flagged so in the + * decriptor. + */ + if (config->enabled_at_boot) + gflags = GPIOD_OUT_HIGH; + else + gflags = GPIOD_OUT_LOW; + cfg.ena_gpiod = devm_gpiod_get_optional(&pdev->dev, "enable", gflags); if (IS_ERR(cfg.ena_gpiod)) { ret = PTR_ERR(cfg.ena_gpiod); diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h index 1a4340ed8e2b..f10140da7145 100644 --- a/include/linux/regulator/fixed.h +++ b/include/linux/regulator/fixed.h @@ -25,14 +25,6 @@ struct regulator_init_data; * @input_supply: Name of the input regulator supply * @microvolts: Output voltage of regulator * @startup_delay: Start-up time in microseconds - * @gpio_is_open_drain: Gpio pin is open drain or normal type. - * If it is open drain type then HIGH will be set - * through PULL-UP with setting gpio as input - * and low will be set as gpio-output with driven - * to low. For non-open-drain case, the gpio will - * will be in output and drive to low/high accordingly. - * @enable_high: Polarity of enable GPIO - * 1 = Active high, 0 = Active low * @enabled_at_boot: Whether regulator has been enabled at * boot or not. 1 = Yes, 0 = No * This is used to keep the regulator at @@ -48,8 +40,6 @@ struct fixed_voltage_config { const char *input_supply; int microvolts; unsigned startup_delay; - unsigned gpio_is_open_drain:1; - unsigned enable_high:1; unsigned enabled_at_boot:1; struct regulator_init_data *init_data; }; diff --git a/include/linux/regulator/gpio-regulator.h b/include/linux/regulator/gpio-regulator.h index 536cab86f2d5..4f3cc1a73ade 100644 --- a/include/linux/regulator/gpio-regulator.h +++ b/include/linux/regulator/gpio-regulator.h @@ -44,8 +44,6 @@ struct gpio_regulator_state { /** * struct gpio_regulator_config - config structure * @supply_name: Name of the regulator supply - * @enable_high: Polarity of enable GPIO - * 1 = Active high, 0 = Active low * @enabled_at_boot: Whether regulator has been enabled at * boot or not. 1 = Yes, 0 = No * This is used to keep the regulator at @@ -67,7 +65,6 @@ struct gpio_regulator_state { struct gpio_regulator_config { const char *supply_name; - unsigned enable_high:1; unsigned enabled_at_boot:1; unsigned startup_delay;