diff mbox series

[v3,1/4] dt-bindings: hwlock: Document STM32 hwspinlock bindings

Message ID 20181112152342.6561-2-benjamin.gaignard@st.com
State Superseded
Headers show
Series Add support of STM32 hwspinlock | expand

Commit Message

Benjamin Gaignard Nov. 12, 2018, 3:23 p.m. UTC
Add bindings for STM32 hardware spinlock device

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>

---
version 3 :
- fix clock name in properties description
version 2 :
- change clock name from hwspinlock to hsem to be align with hardware
  documentation

 .../bindings/hwlock/st,stm32-hwspinlock.txt        | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt

-- 
2.15.0
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
new file mode 100644
index 000000000000..adf4f000ea3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwlock/st,stm32-hwspinlock.txt
@@ -0,0 +1,23 @@ 
+STM32 Hardware Spinlock Device Binding
+-------------------------------------
+
+Required properties :
+- compatible : should be "st,stm32-hwspinlock".
+- reg : the register address of hwspinlock.
+- #hwlock-cells : hwlock users only use the hwlock id to represent a specific
+	hwlock, so the number of cells should be <1> here.
+- clock-names : Must contain "hsem".
+- clocks : Must contain a phandle entry for the clock in clock-names, see the
+	common clock bindings.
+
+Please look at the generic hwlock binding for usage information for consumers,
+"Documentation/devicetree/bindings/hwlock/hwlock.txt"
+
+Example of hwlock provider:
+	hwspinlock@4c000000 {
+		compatible = "st,stm32-hwspinlock";
+		#hwlock-cells = <1>;
+		reg = <0x4c000000 0x400>;
+		clocks = <&rcc HSEM>;
+		clock-names = "hsem";
+	};