@@ -1311,9 +1311,8 @@ config MFD_TI_LMU
select REGMAP_I2C
help
Say yes here to enable support for TI LMU chips.
-
- TI LMU MFD supports LM3532, LM3631, LM3632, LM3633, and LM3695.
- It consists of backlight, LED and regulator driver.
+ TI LMU MFD supports LM3532, LM3631, LM3632, LM3633, LM3695 and
+ LM36274. It consists of backlight, LED and regulator driver.
It provides consistent device controls for lighting functions.
config MFD_OMAP_USB_HOST
@@ -111,6 +111,17 @@ static const struct mfd_cell lm3695_devices[] = {
},
};
+static const struct mfd_cell lm36274_devices[] = {
+ LM363X_REGULATOR(LM36274_BOOST),
+ LM363X_REGULATOR(LM36274_LDO_POS),
+ LM363X_REGULATOR(LM36274_LDO_NEG),
+ {
+ .name = "lm36274-leds",
+ .id = LM36274,
+ .of_compatible = "ti,lm36274-backlight",
+ },
+};
+
#define TI_LMU_DATA(chip, max_reg) \
static const struct ti_lmu_data chip##_data = \
{ \
@@ -123,6 +134,7 @@ TI_LMU_DATA(lm3631, LM3631_MAX_REG);
TI_LMU_DATA(lm3632, LM3632_MAX_REG);
TI_LMU_DATA(lm3633, LM3633_MAX_REG);
TI_LMU_DATA(lm3695, LM3695_MAX_REG);
+TI_LMU_DATA(lm36274, LM36274_MAX_REG);
static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id)
{
@@ -191,6 +203,7 @@ static const struct of_device_id ti_lmu_of_match[] = {
{ .compatible = "ti,lm3632", .data = &lm3632_data },
{ .compatible = "ti,lm3633", .data = &lm3633_data },
{ .compatible = "ti,lm3695", .data = &lm3695_data },
+ { .compatible = "ti,lm36274", .data = &lm36274_data },
{ }
};
MODULE_DEVICE_TABLE(of, ti_lmu_of_match);
@@ -200,6 +213,7 @@ static const struct i2c_device_id ti_lmu_ids[] = {
{ "lm3632", LM3632 },
{ "lm3633", LM3633 },
{ "lm3695", LM3695 },
+ { "lm36274", LM36274 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ti_lmu_ids);
@@ -189,4 +189,27 @@
#define LM3695_REG_BRT_MSB 0x14
#define LM3695_MAX_REG 0x14
+
+/* LM36274 */
+#define LM36274_REG_REV 0x01
+#define LM36274_REG_BL_CFG_1 0x02
+#define LM36274_REG_BL_CFG_2 0x03
+#define LM36274_REG_BRT_LSB 0x04
+#define LM36274_REG_BRT_MSB 0x05
+#define LM36274_REG_BL_EN 0x08
+
+#define LM36274_REG_BIAS_CONFIG_1 0x09
+#define LM36274_EXT_EN_MASK BIT(0)
+#define LM36274_EN_VNEG_MASK BIT(1)
+#define LM36274_EN_VPOS_MASK BIT(2)
+
+#define LM36274_REG_BIAS_CONFIG_2 0x0a
+#define LM36274_REG_BIAS_CONFIG_3 0x0b
+#define LM36274_REG_VOUT_BOOST 0x0c
+#define LM36274_REG_VOUT_POS 0x0d
+#define LM36274_REG_VOUT_NEG 0x0e
+#define LM36274_VOUT_MASK 0x3F
+
+#define LM36274_MAX_REG 0x13
+
#endif
@@ -26,6 +26,7 @@ enum ti_lmu_id {
LM3632,
LM3633,
LM3695,
+ LM36274,
LMU_MAX_ID,
};
@@ -67,6 +68,9 @@ enum lm363x_regulator_id {
LM3632_BOOST, /* Boost output */
LM3632_LDO_POS, /* Positive display bias output */
LM3632_LDO_NEG, /* Negative display bias output */
+ LM36274_BOOST, /* Boost output */
+ LM36274_LDO_POS, /* Positive display bias output */
+ LM36274_LDO_NEG, /* Negative display bias output */
};
/**
Add the LM36274 register support to the ti-lmu MFD driver. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- drivers/mfd/Kconfig | 5 ++--- drivers/mfd/ti-lmu.c | 14 ++++++++++++++ include/linux/mfd/ti-lmu-register.h | 23 +++++++++++++++++++++++ include/linux/mfd/ti-lmu.h | 4 ++++ 4 files changed, 43 insertions(+), 3 deletions(-) -- 2.19.0