@@ -1312,7 +1312,7 @@ config MFD_TI_LMU
help
Say yes here to enable support for TI LMU chips.
- TI LMU MFD supports LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697.
+ TI LMU MFD supports LM3532, LM3631, LM3632, LM3633, and LM3695.
It consists of backlight, LED and regulator driver.
It provides consistent device controls for lighting functions.
@@ -111,20 +111,6 @@ static const struct mfd_cell lm3695_devices[] = {
},
};
-static const struct mfd_cell lm3697_devices[] = {
- {
- .name = "ti-lmu-backlight",
- .id = LM3697,
- .of_compatible = "ti,lm3697-backlight",
- },
- /* Monitoring driver for open/short circuit detection */
- {
- .name = "ti-lmu-fault-monitor",
- .id = LM3697,
- .of_compatible = "ti,lm3697-fault-monitor",
- },
-};
-
#define TI_LMU_DATA(chip, max_reg) \
static const struct ti_lmu_data chip##_data = \
{ \
@@ -137,7 +123,6 @@ TI_LMU_DATA(lm3631, LM3631_MAX_REG);
TI_LMU_DATA(lm3632, LM3632_MAX_REG);
TI_LMU_DATA(lm3633, LM3633_MAX_REG);
TI_LMU_DATA(lm3695, LM3695_MAX_REG);
-TI_LMU_DATA(lm3697, LM3697_MAX_REG);
static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id)
{
@@ -206,7 +191,6 @@ static const struct of_device_id ti_lmu_of_match[] = {
{ .compatible = "ti,lm3632", .data = &lm3632_data },
{ .compatible = "ti,lm3633", .data = &lm3633_data },
{ .compatible = "ti,lm3695", .data = &lm3695_data },
- { .compatible = "ti,lm3697", .data = &lm3697_data },
{ }
};
MODULE_DEVICE_TABLE(of, ti_lmu_of_match);
@@ -216,7 +200,6 @@ static const struct i2c_device_id ti_lmu_ids[] = {
{ "lm3632", LM3632 },
{ "lm3633", LM3633 },
{ "lm3695", LM3695 },
- { "lm3697", LM3697 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ti_lmu_ids);
@@ -189,48 +189,4 @@
#define LM3695_REG_BRT_MSB 0x14
#define LM3695_MAX_REG 0x14
-
-/* LM3697 */
-#define LM3697_REG_HVLED_OUTPUT_CFG 0x10
-#define LM3697_HVLED1_CFG_MASK BIT(0)
-#define LM3697_HVLED2_CFG_MASK BIT(1)
-#define LM3697_HVLED3_CFG_MASK BIT(2)
-#define LM3697_HVLED1_CFG_SHIFT 0
-#define LM3697_HVLED2_CFG_SHIFT 1
-#define LM3697_HVLED3_CFG_SHIFT 2
-
-#define LM3697_REG_BL0_RAMP 0x11
-#define LM3697_REG_BL1_RAMP 0x12
-#define LM3697_RAMPUP_MASK 0xF0
-#define LM3697_RAMPUP_SHIFT 4
-#define LM3697_RAMPDN_MASK 0x0F
-#define LM3697_RAMPDN_SHIFT 0
-
-#define LM3697_REG_RAMP_CONF 0x14
-#define LM3697_RAMP_MASK 0x0F
-#define LM3697_RAMP_EACH 0x05
-
-#define LM3697_REG_PWM_CFG 0x1C
-#define LM3697_PWM_A_MASK BIT(0)
-#define LM3697_PWM_B_MASK BIT(1)
-
-#define LM3697_REG_IMAX_A 0x17
-#define LM3697_REG_IMAX_B 0x18
-
-#define LM3697_REG_FEEDBACK_ENABLE 0x19
-
-#define LM3697_REG_BRT_A_LSB 0x20
-#define LM3697_REG_BRT_A_MSB 0x21
-#define LM3697_REG_BRT_B_LSB 0x22
-#define LM3697_REG_BRT_B_MSB 0x23
-
-#define LM3697_REG_ENABLE 0x24
-
-#define LM3697_REG_OPEN_FAULT_STATUS 0xB0
-
-#define LM3697_REG_SHORT_FAULT_STATUS 0xB2
-
-#define LM3697_REG_MONITOR_ENABLE 0xB4
-
-#define LM3697_MAX_REG 0xB4
#endif
@@ -26,7 +26,6 @@ enum ti_lmu_id {
LM3632,
LM3633,
LM3695,
- LM3697,
LMU_MAX_ID,
};
Remove support for the LM3697 from the ti-lmu driver in favor of a dedicated LED driver. Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Dan Murphy <dmurphy@ti.com> --- v4 - No changes - https://lore.kernel.org/patchwork/patch/1068620/ v3 - No changes - https://lore.kernel.org/patchwork/patch/1058760/ v2 - Fixed commit message LF, removed leds/Kconfig from patch. - https://lore.kernel.org/patchwork/patch/1054502/ drivers/mfd/Kconfig | 2 +- drivers/mfd/ti-lmu.c | 17 ----------- include/linux/mfd/ti-lmu-register.h | 44 ----------------------------- include/linux/mfd/ti-lmu.h | 1 - 4 files changed, 1 insertion(+), 63 deletions(-) -- 2.21.0.5.gaeb582a983