diff mbox series

[2/9] genirq/timings: Fix timings buffer inspection

Message ID 20190513102953.16424-3-daniel.lezcano@linaro.org
State Superseded
Headers show
Series genirq/timings: Fixes and selftests | expand

Commit Message

Daniel Lezcano May 13, 2019, 10:29 a.m. UTC 
It appears the index beginning computation is not correct, the current
code does:

     i = (irqts->count & IRQ_TIMINGS_MASK) - 1

If irqts->count is equal to zero, we end up with an index equal to -1,
but that does not happen because the function checks against zero
before and returns in such case.

However, if irqts->count is a multiple of IRQ_TIMINGS_SIZE, the
resulting & bit op will be zero and leads also to a -1 index.

Re-introduce the iteration loop belonging to the previous variance
code which was correct.

Fixes: bbba0e7c5cda "genirq/timings: Add array suffix computation code"
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

---
 kernel/irq/timings.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/kernel/irq/timings.c b/kernel/irq/timings.c
index 60362aca4ca4..250bb00ccd85 100644
--- a/kernel/irq/timings.c
+++ b/kernel/irq/timings.c
@@ -267,6 +267,23 @@  void irq_timings_disable(void)
 #define PREDICTION_MAX		10 /* 2 ^ PREDICTION_MAX useconds */
 #define PREDICTION_BUFFER_SIZE	16 /* slots for EMAs, hardly more than 16 */
 
+/*
+ * Number of elements in the circular buffer: If it happens it was
+ * flushed before, then the number of elements could be smaller than
+ * IRQ_TIMINGS_SIZE, so the count is used, otherwise the array size is
+ * used as we wrapped. The index begins from zero when we did not
+ * wrap. That could be done in a nicer way with the proper circular
+ * array structure type but with the cost of extra computation in the
+ * interrupt handler hot path. We choose efficiency.
+ */
+#define for_each_irqts(i, irqts)					\
+	for (i = irqts->count < IRQ_TIMINGS_SIZE ?			\
+		     0 : irqts->count & IRQ_TIMINGS_MASK,		\
+		     irqts->count = min(IRQ_TIMINGS_SIZE,		\
+					irqts->count);			\
+	     irqts->count > 0; irqts->count--,				\
+		     i = (i + 1) & IRQ_TIMINGS_MASK)
+
 struct irqt_stat {
 	u64	last_ts;
 	u64	ema_time[PREDICTION_BUFFER_SIZE];
@@ -528,11 +545,7 @@  u64 irq_timings_next_event(u64 now)
 	 * model while decrementing the counter because we consume the
 	 * data from our circular buffer.
 	 */
-
-	i = (irqts->count & IRQ_TIMINGS_MASK) - 1;
-	irqts->count = min(IRQ_TIMINGS_SIZE, irqts->count);
-
-	for (; irqts->count > 0; irqts->count--, i = (i + 1) & IRQ_TIMINGS_MASK) {
+	for_each_irqts(i, irqts) {
 		irq = irq_timing_decode(irqts->values[i], &ts);
 		s = idr_find(&irqt_stats, irq);
 		if (s)