@@ -179,26 +179,6 @@ config X86_DECODER_SELFTEST
decoder code.
If unsure, say "N".
-#
-# IO delay types:
-#
-
-config IO_DELAY_TYPE_0X80
- int
- default "0"
-
-config IO_DELAY_TYPE_0XED
- int
- default "1"
-
-config IO_DELAY_TYPE_UDELAY
- int
- default "2"
-
-config IO_DELAY_TYPE_NONE
- int
- default "3"
-
choice
prompt "IO delay type"
default IO_DELAY_0X80
@@ -229,30 +209,6 @@ config IO_DELAY_NONE
endchoice
-if IO_DELAY_0X80
-config DEFAULT_IO_DELAY_TYPE
- int
- default IO_DELAY_TYPE_0X80
-endif
-
-if IO_DELAY_0XED
-config DEFAULT_IO_DELAY_TYPE
- int
- default IO_DELAY_TYPE_0XED
-endif
-
-if IO_DELAY_UDELAY
-config DEFAULT_IO_DELAY_TYPE
- int
- default IO_DELAY_TYPE_UDELAY
-endif
-
-if IO_DELAY_NONE
-config DEFAULT_IO_DELAY_TYPE
- int
- default IO_DELAY_TYPE_NONE
-endif
-
config DEBUG_BOOT_PARAMS
bool "Debug boot parameters"
depends on DEBUG_KERNEL
@@ -13,7 +13,22 @@
#include <linux/dmi.h>
#include <linux/io.h>
-int io_delay_type __read_mostly = CONFIG_DEFAULT_IO_DELAY_TYPE;
+#define IO_DELAY_TYPE_0X80 0
+#define IO_DELAY_TYPE_0XED 1
+#define IO_DELAY_TYPE_UDELAY 2
+#define IO_DELAY_TYPE_NONE 3
+
+#if defined(CONFIG_IO_DELAY_0X80)
+#define DEFAULT_IO_DELAY_TYPE IO_DELAY_TYPE_0X80
+#elif defined(CONFIG_IO_DELAY_0XED)
+#define DEFAULT_IO_DELAY_TYPE IO_DELAY_TYPE_0XED
+#elif defined(CONFIG_IO_DELAY_UDELAY)
+#define DEFAULT_IO_DELAY_TYPE IO_DELAY_TYPE_UDELAY
+#elif defined(CONFIG_IO_DELAY_NONE)
+#define DEFAULT_IO_DELAY_TYPE IO_DELAY_TYPE_NONE
+#endif
+
+int io_delay_type __read_mostly = DEFAULT_IO_DELAY_TYPE;
static int __initdata io_delay_override;
@@ -24,13 +39,13 @@ void native_io_delay(void)
{
switch (io_delay_type) {
default:
- case CONFIG_IO_DELAY_TYPE_0X80:
+ case IO_DELAY_TYPE_0X80:
asm volatile ("outb %al, $0x80");
break;
- case CONFIG_IO_DELAY_TYPE_0XED:
+ case IO_DELAY_TYPE_0XED:
asm volatile ("outb %al, $0xed");
break;
- case CONFIG_IO_DELAY_TYPE_UDELAY:
+ case IO_DELAY_TYPE_UDELAY:
/*
* 2 usecs is an upper-bound for the outb delay but
* note that udelay doesn't have the bus-level
@@ -40,7 +55,7 @@ void native_io_delay(void)
*/
udelay(2);
break;
- case CONFIG_IO_DELAY_TYPE_NONE:
+ case IO_DELAY_TYPE_NONE:
break;
}
}
@@ -48,9 +63,9 @@ EXPORT_SYMBOL(native_io_delay);
static int __init dmi_io_delay_0xed_port(const struct dmi_system_id *id)
{
- if (io_delay_type == CONFIG_IO_DELAY_TYPE_0X80) {
+ if (io_delay_type == IO_DELAY_TYPE_0X80) {
pr_notice("%s: using 0xed I/O delay port\n", id->ident);
- io_delay_type = CONFIG_IO_DELAY_TYPE_0XED;
+ io_delay_type = IO_DELAY_TYPE_0XED;
}
return 0;
@@ -116,13 +131,13 @@ static int __init io_delay_param(char *s)
return -EINVAL;
if (!strcmp(s, "0x80"))
- io_delay_type = CONFIG_IO_DELAY_TYPE_0X80;
+ io_delay_type = IO_DELAY_TYPE_0X80;
else if (!strcmp(s, "0xed"))
- io_delay_type = CONFIG_IO_DELAY_TYPE_0XED;
+ io_delay_type = IO_DELAY_TYPE_0XED;
else if (!strcmp(s, "udelay"))
- io_delay_type = CONFIG_IO_DELAY_TYPE_UDELAY;
+ io_delay_type = IO_DELAY_TYPE_UDELAY;
else if (!strcmp(s, "none"))
- io_delay_type = CONFIG_IO_DELAY_TYPE_NONE;
+ io_delay_type = IO_DELAY_TYPE_NONE;
else
return -EINVAL;
CONFIG_IO_DELAY_TYPE_* are not kernel configuration at all. They just define constant values, 0, 1, 2, and 3. Define them by #define in C. CONFIG_DEFAULT_IO_DELAY_TYPE can also be defined in C by using #ifdef and #define directives. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- arch/x86/Kconfig.debug | 44 -------------------------------------- arch/x86/kernel/io_delay.c | 37 ++++++++++++++++++++++---------- 2 files changed, 26 insertions(+), 55 deletions(-) -- 2.17.1