diff mbox series

[13/15] arm64: dts: msm8916: thermal: Add interrupt support

Message ID 380196111ac2b6faa6dfb27f26189ddaa1e6e606.1564091601.git.amit.kucheria@linaro.org
State Superseded
Headers show
Series None | expand

Commit Message

Amit Kucheria July 25, 2019, 10:18 p.m. UTC 
Register upper-lower interrupt for the tsens controller.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>

---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 22 ++++++++++++----------
 1 file changed, 12 insertions(+), 10 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 8686e101905c..400045a100ca 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -176,8 +176,8 @@ 
 
 	thermal-zones {
 		cpu0_1-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 5>;
 
@@ -206,8 +206,8 @@ 
 		};
 
 		cpu2_3-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 4>;
 
@@ -236,8 +236,8 @@ 
 		};
 
 		gpu-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 2>;
 
@@ -256,8 +256,8 @@ 
 		};
 
 		camera-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 1>;
 
@@ -271,8 +271,8 @@ 
 		};
 
 		modem-thermal {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
 
 			thermal-sensors = <&tsens 0>;
 
@@ -816,6 +816,8 @@ 
 			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
 			nvmem-cell-names = "calib", "calib_sel";
 			#qcom,sensors = <5>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tsens";
 			#thermal-sensor-cells = <1>;
 		};