diff mbox series

[v2,07/13] arm64: dts: msm8998: thermal: GPU has two sensors, add the second

Message ID 7af19b6468b6e10f0a24c40b7a467a71ae9bee65.1553853990.git.amit.kucheria@linaro.org
State Accepted
Commit 2fa2d301cbca51263e615cd07d4140b15047cae0
Headers show
Series None | expand

Commit Message

Amit Kucheria March 29, 2019, 10:12 a.m. UTC 
The first sensor is on top and the second sensor below the GPU

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>

---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 25 ++++++++++++++++++++++++-
 1 file changed, 24 insertions(+), 1 deletion(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 56ca9ecdb0bf..b368da235663 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -506,11 +506,34 @@ 
 			};
 		};
 
-		gpu-thermal {
+		gpu-thermal-bottom {
+			polling-delay-passive = <250>;
+			polling-delay = <1000>;
+
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				gpu1_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
+		};
+
+		gpu-thermal-top {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				gpu2_alert0: trip-point@0 {
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "hot";
+				};
+			};
 		};
 	};