| Message ID | 20210111054428.3273-1-dqfext@gmail.com |
|---|---|
| Headers | show |
| Series | dsa: add MT7530 GPIO support | expand |
Hi Marek, On Mon, Jan 11, 2021 at 11:46 PM Marek Behún <kabel@kernel.org> wrote: > > what modes does the LED support? Does it support blinking on rx/tx? > What about link status? Yes. But unfortunately they cannot be controlled individually, unless on GPIO mode. > I'd like to know because I am still working on patches which add > ethernet PHY/switch LEDs, with transparent offloading of netdev trigger. > > Marek
On Mon, Jan 11, 2021 at 2:43 PM Vladimir Oltean <olteanv@gmail.com> wrote: > > On Mon, Jan 11, 2021 at 01:44:26PM +0800, DENG Qingfang wrote: > > MT7530's LED controller can be used as GPIO controller. Add support for > > it. > > > > DENG Qingfang (2): > > dt-bindings: net: dsa: add MT7530 GPIO controller binding > > drivers: net: dsa: mt7530: MT7530 optional GPIO support > > > > .../devicetree/bindings/net/dsa/mt7530.txt | 6 ++ > > drivers/net/dsa/mt7530.c | 96 +++++++++++++++++++ > > drivers/net/dsa/mt7530.h | 20 ++++ > > 3 files changed, 122 insertions(+) > > > > -- > > 2.25.1 > > Adding GPIO and LED maintainers to also have a look. > https://patchwork.kernel.org/project/netdevbpf/cover/20210111054428.3273-1-dqfext@gmail.com/ Can you resend the series with GPIO maintainers in CC? Bart
On Mon, 11 Jan 2021 13:44:27 +0800, DENG Qingfang wrote: > Add device tree binding to support MT7530 GPIO controller. > > Signed-off-by: DENG Qingfang <dqfext@gmail.com> > --- > Documentation/devicetree/bindings/net/dsa/mt7530.txt | 6 ++++++ > 1 file changed, 6 insertions(+) > Acked-by: Rob Herring <robh@kernel.org>