| Message ID | 20210511043039.20056-1-o.rempel@pengutronix.de |
|---|---|
| Headers | show |
| Series | remove different PHY fixups - dts part | expand |
On Tue, May 11, 2021 at 06:30:39AM +0200, Oleksij Rempel wrote: > Without SoC specific PHY fixups the network interface on this board will > fail to work. Provide missing DT properties to make it work again. > > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew
On Tue, May 11, 2021 at 06:30:37AM +0200, Oleksij Rempel wrote: > changes v3: > - split arch and dts changes > > changes v2: > - rebase against latest kernel > - fix networking on RIoTBoard > > This patch series tries to remove most of the imx6 and imx7 board > specific PHY configuration via fixup, as this breaks the PHYs when > connected to switch chips or USB Ethernet MACs. > > Each patch has the possibility to break boards, but contains a > recommendation to fix the problem in a more portable and future-proof > way. > > Oleksij Rempel (2): > ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID > ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE > value Applied both, thanks.
changes v3: - split arch and dts changes changes v2: - rebase against latest kernel - fix networking on RIoTBoard This patch series tries to remove most of the imx6 and imx7 board specific PHY configuration via fixup, as this breaks the PHYs when connected to switch chips or USB Ethernet MACs. Each patch has the possibility to break boards, but contains a recommendation to fix the problem in a more portable and future-proof way. Oleksij Rempel (2): ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID ARM: dts: imx6dl-riotboard: configure PHY clock and set proper EEE value arch/arm/boot/dts/imx6dl-riotboard.dts | 2 ++ arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-)