mbox series

[net-next,v9,00/15] ACPI support for dpaa2 driver

Message ID 20210611105401.270673-1-ciorneiioana@gmail.com
Headers show
Series ACPI support for dpaa2 driver | expand

Message

Ioana Ciornei June 11, 2021, 10:53 a.m. UTC
From: Ioana Ciornei <ioana.ciornei@nxp.com>

This patch set provides ACPI support to DPAA2 network drivers.

It also introduces new fwnode based APIs to support phylink and phy
layers
    Following functions are defined:
      phylink_fwnode_phy_connect()
      fwnode_mdiobus_register_phy()
      fwnode_get_phy_id()
      fwnode_phy_find_device()
      device_phy_find_device()
      fwnode_get_phy_node()
      fwnode_mdio_find_device()
      acpi_get_local_address()

    First one helps in connecting phy to phylink instance.
    Next three helps in getting phy_id and registering phy to mdiobus
    Next two help in finding a phy on a mdiobus.
    Next one helps in getting phy_node from a fwnode.
    Last one is used to get local address from _ADR object.

    Corresponding OF functions are refactored.

Tested-on: LX2160ARDB

Changes in v9:
 - merged some minimal changes requested in the wording of the commit
   messages
 - fixed some build problems in patch 8/15 by moving the removal of
   of_find_mii_timestamper from patch 8/15 to 9/15.

Changes in v8:
 - fixed some checkpatch warnings/checks
 - included linux/fwnode_mdio.h in fwnode_mdio.c (fixed the build warnings)
 - added fwnode_find_mii_timestamper() and
   fwnode_mdiobus_phy_device_register() in order to get rid of the cycle
   dependency.
 - change to 'depends on (ACPI || OF) || COMPILE_TEST (for FWNODE_MDIO)
 - remove the fwnode_mdiobus_register from fwnode_mdio.c since it
   introduces a cycle of dependencies.

Changes in v7:
- correct fwnode_mdio_find_device() description
- check NULL in unregister_mii_timestamper()
- Call unregister_mii_timestamper() without NULL check
- Create fwnode_mdio.c and move fwnode_mdiobus_register_phy()
- include fwnode_mdio.h
- Include headers directly used in acpi_mdio.c
- Move fwnode_mdiobus_register() to fwnode_mdio.c
- Include fwnode_mdio.h
- Alphabetically sort header inclusions
- remove unnecassary checks

Changes in v6:
- Minor cleanup
- fix warning for function parameter of fwnode_mdio_find_device()
- Initialize mii_ts to NULL
- use GENMASK() and ACPI_COMPANION_SET()
- some cleanup
- remove unwanted header inclusion
- remove OF check for fixed-link
- use dev_fwnode()
- remove useless else
- replace of_device_is_available() to fwnode_device_is_available()

Changes in v5:
- More cleanup
- Replace fwnode_get_id() with acpi_get_local_address()
- add missing MODULE_LICENSE()
- replace fwnode_get_id() with OF and ACPI function calls
- replace fwnode_get_id() with OF and ACPI function calls

Changes in v4:
- More cleanup
- Improve code structure to handle all cases
- Remove redundant else from fwnode_mdiobus_register()
- Cleanup xgmac_mdio_probe()
- call phy_device_free() before returning

Changes in v3:
- Add more info on legacy DT properties "phy" and "phy-device"
- Redefine fwnode_phy_find_device() to follow of_phy_find_device()
- Use traditional comparison pattern
- Use GENMASK
- Modified to retrieve reg property value for ACPI as well
- Resolved compilation issue with CONFIG_ACPI = n
- Added more info into documentation
- Use acpi_mdiobus_register()
- Avoid unnecessary line removal
- Remove unused inclusion of acpi.h

Changes in v2:
- Updated with more description in document
- use reverse christmas tree ordering for local variables
- Refactor OF functions to use fwnode functions

Calvin Johnson (15):
  Documentation: ACPI: DSD: Document MDIO PHY
  net: phy: Introduce fwnode_mdio_find_device()
  net: phy: Introduce phy related fwnode functions
  of: mdio: Refactor of_phy_find_device()
  net: phy: Introduce fwnode_get_phy_id()
  of: mdio: Refactor of_get_phy_id()
  net: mii_timestamper: check NULL in unregister_mii_timestamper()
  net: mdiobus: Introduce fwnode_mdiobus_register_phy()
  of: mdio: Refactor of_mdiobus_register_phy()
  ACPI: utils: Introduce acpi_get_local_address()
  net: mdio: Add ACPI support code for mdio
  net/fsl: Use [acpi|of]_mdiobus_register
  net: phylink: introduce phylink_fwnode_phy_connect()
  net: phylink: Refactor phylink_of_phy_connect()
  net: dpaa2-mac: Add ACPI support for DPAA2 MAC driver

 Documentation/firmware-guide/acpi/dsd/phy.rst | 133 ++++++++++++++++
 MAINTAINERS                                   |   2 +
 drivers/acpi/utils.c                          |  14 ++
 .../net/ethernet/freescale/dpaa2/dpaa2-mac.c  |  88 ++++++-----
 .../net/ethernet/freescale/dpaa2/dpaa2-mac.h  |   2 +-
 drivers/net/ethernet/freescale/xgmac_mdio.c   |  30 ++--
 drivers/net/mdio/Kconfig                      |  14 ++
 drivers/net/mdio/Makefile                     |   4 +-
 drivers/net/mdio/acpi_mdio.c                  |  58 +++++++
 drivers/net/mdio/fwnode_mdio.c                | 144 ++++++++++++++++++
 drivers/net/mdio/of_mdio.c                    | 138 ++---------------
 drivers/net/phy/mii_timestamper.c             |   3 +
 drivers/net/phy/phy_device.c                  | 109 ++++++++++++-
 drivers/net/phy/phylink.c                     |  41 +++--
 include/linux/acpi.h                          |   7 +
 include/linux/acpi_mdio.h                     |  26 ++++
 include/linux/fwnode_mdio.h                   |  35 +++++
 include/linux/phy.h                           |  32 ++++
 include/linux/phylink.h                       |   3 +
 19 files changed, 693 insertions(+), 190 deletions(-)
 create mode 100644 Documentation/firmware-guide/acpi/dsd/phy.rst
 create mode 100644 drivers/net/mdio/acpi_mdio.c
 create mode 100644 drivers/net/mdio/fwnode_mdio.c
 create mode 100644 include/linux/acpi_mdio.h
 create mode 100644 include/linux/fwnode_mdio.h

Comments

Russell King (Oracle) June 11, 2021, 11:17 a.m. UTC | #1
On Fri, Jun 11, 2021 at 01:53:59PM +0300, Ioana Ciornei wrote:
> From: Calvin Johnson <calvin.johnson@oss.nxp.com>
> 
> Define phylink_fwnode_phy_connect() to connect phy specified by
> a fwnode to a phylink instance.
> 
> Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
> Acked-by: Grant Likely <grant.likely@arm.com>

Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Thanks.

> ---
> 
> Changes in v9: None
> Changes in v8: None
> Changes in v7: None
> Changes in v6:
> - remove OF check for fixed-link
> 
> Changes in v5: None
> Changes in v4:
> - call phy_device_free() before returning
> 
> Changes in v3: None
> Changes in v2: None
> 
> 
> 
>  drivers/net/phy/phylink.c | 54 +++++++++++++++++++++++++++++++++++++++
>  include/linux/phylink.h   |  3 +++
>  2 files changed, 57 insertions(+)
> 
> diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
> index 96d8e88b4e46..9cc0f69faafe 100644
> --- a/drivers/net/phy/phylink.c
> +++ b/drivers/net/phy/phylink.c
> @@ -5,6 +5,7 @@
>   *
>   * Copyright (C) 2015 Russell King
>   */
> +#include <linux/acpi.h>
>  #include <linux/ethtool.h>
>  #include <linux/export.h>
>  #include <linux/gpio/consumer.h>
> @@ -1125,6 +1126,59 @@ int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
>  }
>  EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
>  
> +/**
> + * phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode.
> + * @pl: a pointer to a &struct phylink returned from phylink_create()
> + * @fwnode: a pointer to a &struct fwnode_handle.
> + * @flags: PHY-specific flags to communicate to the PHY device driver
> + *
> + * Connect the phy specified @fwnode to the phylink instance specified
> + * by @pl.
> + *
> + * Returns 0 on success or a negative errno.
> + */
> +int phylink_fwnode_phy_connect(struct phylink *pl,
> +			       struct fwnode_handle *fwnode,
> +			       u32 flags)
> +{
> +	struct fwnode_handle *phy_fwnode;
> +	struct phy_device *phy_dev;
> +	int ret;
> +
> +	/* Fixed links and 802.3z are handled without needing a PHY */
> +	if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
> +	    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
> +	     phy_interface_mode_is_8023z(pl->link_interface)))
> +		return 0;
> +
> +	phy_fwnode = fwnode_get_phy_node(fwnode);
> +	if (IS_ERR(phy_fwnode)) {
> +		if (pl->cfg_link_an_mode == MLO_AN_PHY)
> +			return -ENODEV;
> +		return 0;
> +	}
> +
> +	phy_dev = fwnode_phy_find_device(phy_fwnode);
> +	/* We're done with the phy_node handle */
> +	fwnode_handle_put(phy_fwnode);
> +	if (!phy_dev)
> +		return -ENODEV;
> +
> +	ret = phy_attach_direct(pl->netdev, phy_dev, flags,
> +				pl->link_interface);
> +	if (ret) {
> +		phy_device_free(phy_dev);
> +		return ret;
> +	}
> +
> +	ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
> +	if (ret)
> +		phy_detach(phy_dev);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(phylink_fwnode_phy_connect);
> +
>  /**
>   * phylink_disconnect_phy() - disconnect any PHY attached to the phylink
>   *   instance.
> diff --git a/include/linux/phylink.h b/include/linux/phylink.h
> index fd2acfd9b597..afb3ded0b691 100644
> --- a/include/linux/phylink.h
> +++ b/include/linux/phylink.h
> @@ -441,6 +441,9 @@ void phylink_destroy(struct phylink *);
>  
>  int phylink_connect_phy(struct phylink *, struct phy_device *);
>  int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags);
> +int phylink_fwnode_phy_connect(struct phylink *pl,
> +			       struct fwnode_handle *fwnode,
> +			       u32 flags);
>  void phylink_disconnect_phy(struct phylink *);
>  
>  void phylink_mac_change(struct phylink *, bool up);
> -- 
> 2.31.1
> 
>