Show patches with: Submitter = Oleksij Rempel       |    State = Action Required       |   134 patches
« 1 2 »
Patch Series S/W/F Date Submitter Delegate State
[net,v1,1/1] net: usb: asix: ax88772: fix boolconv.cocci warnings [net,v1,1/1] net: usb: asix: ax88772: fix boolconv.cocci warnings --- 2021-08-25 Oleksij Rempel New
[net,v2,2/2] net: usb: asix: do not call phy_disconnect() for ax88178 asix fixes --- 2021-08-23 Oleksij Rempel New
[net,v2,1/2] net: usb: asix: ax88772: move embedded PHY detection as early as possible asix fixes --- 2021-08-23 Oleksij Rempel New
[v3,3/3] can: dev: provide optional GPIO based termination support can: provide GPIO based termination --- 2021-08-18 Oleksij Rempel New
[v3,1/3] dt-bindings: can-controller: add support for termination-gpios can: provide GPIO based termination --- 2021-08-18 Oleksij Rempel New
[net-next,v2,1/1] net: phy: nxp-tja11xx: log critical health state [net-next,v2,1/1] net: phy: nxp-tja11xx: log critical health state --- 2021-08-11 Oleksij Rempel New
[net-next,v1] net: phy: nxp-tja11xx: log critical health state [net-next,v1] net: phy: nxp-tja11xx: log critical health state --- 2021-08-10 Oleksij Rempel New
[net,1/1] net: dsa: qca: ar9331: make proper initial port defaults [net,1/1] net: dsa: qca: ar9331: make proper initial port defaults --- 2021-08-03 Oleksij Rempel New
[net,1/1] net: dsa: qca: ar9331: reorder MDIO write sequence [net,1/1] net: dsa: qca: ar9331: reorder MDIO write sequence --- 2021-08-03 Oleksij Rempel New
[net-next,v3,6/6] net: dsa: qca: ar9331: add vlan support [net-next,v3,1/6] net: dsa: qca: ar9331: reorder MDIO write sequence --- 2021-08-02 Oleksij Rempel New
[net-next,v3,3/6] net: dsa: qca: ar9331: add forwarding database support [net-next,v3,1/6] net: dsa: qca: ar9331: reorder MDIO write sequence --- 2021-08-02 Oleksij Rempel New
[net-next,v1,1/1] net: phy: dp83td510: Add basic support for the DP83TD510 Ethernet PHY [net-next,v1,1/1] net: phy: dp83td510: Add basic support for the DP83TD510 Ethernet PHY --- 2021-07-23 Oleksij Rempel New
[net-next,v1,1/1] net: selftests: add MTU test [net-next,v1,1/1] net: selftests: add MTU test --- 2021-07-22 Oleksij Rempel New
[net-next,v1,1/1] net: usb: asix: ax88772: add missing stop [net-next,v1,1/1] net: usb: asix: ax88772: add missing stop --- 2021-07-22 Oleksij Rempel New
[net-next,v1,1/1] net: usb: asix: ax88772: do not poll for PHY before registering it [net-next,v1,1/1] net: usb: asix: ax88772: do not poll for PHY before registering it --- 2021-07-22 Oleksij Rempel New
[v1] can: j1939: j1939_session_deactivate(): clarify lifetime of session object [v1] can: j1939: j1939_session_deactivate(): clarify lifetime of session object --- 2021-07-14 Oleksij Rempel New
[v2,1/2] net: j1939: rename J1939_ERRQUEUE_* to J1939_ERRQUEUE_TX_* [v2,1/2] net: j1939: rename J1939_ERRQUEUE_* to J1939_ERRQUEUE_TX_* --- 2021-07-07 Oleksij Rempel New
[v1,2/2] net: j1939: extend UAPI to notify about RX status [v1,1/2] net: j1939: rename J1939_ERRQUEUE_* to J1939_ERRQUEUE_TX_* --- 2021-07-06 Oleksij Rempel New
[RFC,2/2] net: j1939: extend UAPI to notify about RX status Untitled series #141306 --- 2021-07-02 Oleksij Rempel New
[net-next,v1,1/1] net: usb: asix: ax88772: suspend PHY on driver probe [net-next,v1,1/1] net: usb: asix: ax88772: suspend PHY on driver probe --- 2021-06-29 Oleksij Rempel New
[v1] can: j1939: j1939_sk_init(): set SOCK_RCU_FREE to call sk_destruct() after RCU is done [v1] can: j1939: j1939_sk_init(): set SOCK_RCU_FREE to call sk_destruct() after RCU is done --- 2021-06-17 Oleksij Rempel New
[net-next,v5,6/8] net: dsa: microchip: ksz8795: add LINK_MD register support [net-next,v5,1/8] net: phy: micrel: move phy reg offsets to common header --- 2021-06-14 Oleksij Rempel New
[net-next,v5,5/8] net: phy: micrel: ksz8081 add MDI-X support [net-next,v5,1/8] net: phy: micrel: move phy reg offsets to common header --- 2021-06-14 Oleksij Rempel New
[net-next,v5,3/8] net: phy: micrel: use consistent alignments [net-next,v5,1/8] net: phy: micrel: move phy reg offsets to common header --- 2021-06-14 Oleksij Rempel New
[net-next,v5,2/8] net: dsa: microchip: ksz8795: add phylink support [net-next,v5,1/8] net: phy: micrel: move phy reg offsets to common header --- 2021-06-14 Oleksij Rempel New
[net-next,v5,1/8] net: phy: micrel: move phy reg offsets to common header [net-next,v5,1/8] net: phy: micrel: move phy reg offsets to common header --- 2021-06-14 Oleksij Rempel New
[net-next,v4,4/9] net: phy: micrel: apply resume errata workaround for ksz8873 and ksz8863 provide cable test support for the ksz886x switch --- 2021-06-11 Oleksij Rempel New
[v1,1/1] net: usb: asix: ax88772: manage PHY PM from MAC [v1,1/1] net: usb: asix: ax88772: manage PHY PM from MAC --- 2021-06-10 Oleksij Rempel New
[net-next,v2,8/8] usbnet: run unbind() before unregister_netdev() port asix ax88772 to the PHYlib --- 2021-06-07 Oleksij Rempel New
[net-next,v2,7/8] net: phy: do not print dump stack if device was removed port asix ax88772 to the PHYlib --- 2021-06-07 Oleksij Rempel New
[net-next,v2,6/8] net: usb: asix: add error handling for asix_mdio_* functions port asix ax88772 to the PHYlib --- 2021-06-07 Oleksij Rempel New
[net-next,v2,5/8] net: usb: asix: ax88772: add generic selftest support port asix ax88772 to the PHYlib --- 2021-06-07 Oleksij Rempel New
[net-next,v2,4/8] net: usb: asix: ax88772: add phylib support port asix ax88772 to the PHYlib --- 2021-06-07 Oleksij Rempel New
[net-next,v2,3/8] net: usb/phy: asix: add support for ax88772A/C PHYs port asix ax88772 to the PHYlib --- 2021-06-07 Oleksij Rempel New
[net-next,v2,2/8] net: usb: asix: refactor asix_read_phy_addr() and handle errors on return port asix ax88772 to the PHYlib --- 2021-06-07 Oleksij Rempel New
[net-next,v2,1/8] net: usb: asix: ax88772_bind: use devm_kzalloc() instead of kzalloc() port asix ax88772 to the PHYlib --- 2021-06-07 Oleksij Rempel New
[net-next,v1,5/7] net: usb: asix: add error handling for asix_mdio_* functions port asix ax88772 to the PHYlib --- 2021-06-04 Oleksij Rempel New
[net-next,v3,8/9] net: dsa: dsa_slave_phy_connect(): extend phy's flags with port specific phy flags provide cable test support for the ksz886x switch --- 2021-05-26 Oleksij Rempel New
[net-next,v3,5/9] net: phy/dsa micrel/ksz886x add MDI-X support provide cable test support for the ksz886x switch --- 2021-05-26 Oleksij Rempel New
[net-next,v3,3/9] net: phy: micrel: use consistent indention after define provide cable test support for the ksz886x switch --- 2021-05-26 Oleksij Rempel New
[net,v1] can: j1939: fix Use-after-Free, hold skb ref while in use [net,v1] can: j1939: fix Use-after-Free, hold skb ref while in use --- 2021-05-21 Oleksij Rempel New
[v3,7/7] ARM: imx7d: remove Atheros AR8031 PHY fixup Untitled series #126041 --- 2021-05-11 Oleksij Rempel New
[v3,6/7] ARM: imx6sx: remove Atheros AR8031 PHY fixup Untitled series #126041 --- 2021-05-11 Oleksij Rempel New
[v3,4/7] ARM i.MX6q: remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs Untitled series #126041 --- 2021-05-11 Oleksij Rempel New
[v3,2/7] ARM i.MX6q: remove part of ar8031_phy_fixup() Untitled series #126041 --- 2021-05-11 Oleksij Rempel New
[v3,1/2] ARM: dts: imx6: edmqmx6: set phy-mode to RGMII-ID remove different PHY fixups - dts part --- 2021-05-11 Oleksij Rempel New
[RFC,v2,9/9] net: phy: micrel: ksz886x/ksz8081: add cabletest support provide cable test support for the ksz886x --- 2021-05-10 Oleksij Rempel New
[RFC,v2,2/9] net: dsa: microchip: ksz8795: add phylink support provide cable test support for the ksz886x --- 2021-05-10 Oleksij Rempel New
[RFC,v1,8/9] net: phy: micrel: ksz886x/ksz8081: add cabletest support provide cable test support for the ksz886x --- 2021-05-05 Oleksij Rempel New
[RFC,v1,2/9] net: dsa: microchip: ksz8795: add phylink support provide cable test support for the ksz886x --- 2021-05-05 Oleksij Rempel New
[RFC,v1,1/9] net: phy: micrel: move phy reg offsets to common header provide cable test support for the ksz886x --- 2021-05-05 Oleksij Rempel New
[net-next,v1,1/1] net: selftest: provide option to disable generic selftests [net-next,v1,1/1] net: selftest: provide option to disable generic selftests --- 2021-04-30 Oleksij Rempel New
[net-next,v1,3/3] net: dsa: ksz: ksz8863_smi_probe: set proper return value for ksz_switch_alloc() [net-next,v1,1/3] net: dsa: ksz: ksz8863_smi_probe: fix possible NULL pointer dereference --- 2021-04-29 Oleksij Rempel New
[net-next,v1,1/3] net: dsa: ksz: ksz8863_smi_probe: fix possible NULL pointer dereference [net-next,v1,1/3] net: dsa: ksz: ksz8863_smi_probe: fix possible NULL pointer dereference --- 2021-04-29 Oleksij Rempel New
[net-next,v8,9/9] dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0 microchip: add support for ksz88x3 driver family --- 2021-04-27 Oleksij Rempel New
[net-next,v8,8/9] net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support microchip: add support for ksz88x3 driver family --- 2021-04-27 Oleksij Rempel New
[net-next,v8,7/9] net: phy: Add support for microchip SMI0 MDIO bus microchip: add support for ksz88x3 driver family --- 2021-04-27 Oleksij Rempel New
[net-next,v8,5/9] net: dsa: microchip: Add Microchip KSZ8863 SPI based driver support microchip: add support for ksz88x3 driver family --- 2021-04-27 Oleksij Rempel New
[net-next,v8,4/9] net: dsa: microchip: ksz8795: add support for ksz88xx chips microchip: add support for ksz88x3 driver family --- 2021-04-27 Oleksij Rempel New
[net-next,v8,3/9] net: dsa: microchip: ksz8795: move register offsets and shifts to separate struct microchip: add support for ksz88x3 driver family --- 2021-04-27 Oleksij Rempel New
[net-next,v8,2/9] net: dsa: microchip: ksz8795: move cpu_select_interface to extra function microchip: add support for ksz88x3 driver family --- 2021-04-27 Oleksij Rempel New
[net-next,v8,1/9] net: dsa: microchip: ksz8795: change drivers prefix to be generic microchip: add support for ksz88x3 driver family --- 2021-04-27 Oleksij Rempel New
[net-next,v7,6/9] dt-bindings: net: dsa: document additional Microchip KSZ8863/8873 switch microchip: add support for ksz88x3 driver family --- 2021-04-26 Oleksij Rempel New
[net-next,v3,6/6] net: dsa: enable selftest support for all switches by default provide generic net selftest support --- 2021-04-19 Oleksij Rempel New
[net-next,v3,5/6] net: ag71xx: make use of generic NET_SELFTESTS library provide generic net selftest support --- 2021-04-19 Oleksij Rempel New
[net-next,v3,4/6] net: fec: make use of generic NET_SELFTESTS library provide generic net selftest support --- 2021-04-19 Oleksij Rempel New
[net-next,v3,3/6] net: add generic selftest support provide generic net selftest support --- 2021-04-19 Oleksij Rempel New
[net-next,v3,2/6] net: phy: genphy_loopback: add link speed configuration provide generic net selftest support --- 2021-04-19 Oleksij Rempel New
[net-next,v3,1/6] net: phy: execute genphy_loopback() per default on all PHYs provide generic net selftest support --- 2021-04-19 Oleksij Rempel New
[v2,4/7] net: add generic selftest support Untitled series #120743 --- 2021-04-15 Oleksij Rempel New
[v2,3/7] net: phy: at803x: AR8085 & AR9331: add loopback support Untitled series #120743 --- 2021-04-15 Oleksij Rempel New
[net-next,v1,9/9] net: dsa: qca: ar9331: add vlan support [net-next,v1,1/9] net: dsa: add rcv_post call back --- 2021-04-03 Oleksij Rempel New
[net-next,v1,6/9] net: dsa: qca: ar9331: add ageing time support [net-next,v1,1/9] net: dsa: add rcv_post call back --- 2021-04-03 Oleksij Rempel New
[net-next,v1,4/9] net: dsa: qca: ar9331: make proper initial port defaults [net-next,v1,1/9] net: dsa: add rcv_post call back --- 2021-04-03 Oleksij Rempel New
[net-next,v1,3/9] net: dsa: qca: ar9331: reorder MDIO write sequence [net-next,v1,1/9] net: dsa: add rcv_post call back --- 2021-04-03 Oleksij Rempel New
[net-next,v1,1/9] net: dsa: add rcv_post call back [net-next,v1,1/9] net: dsa: add rcv_post call back --- 2021-04-03 Oleksij Rempel New
[net-next,v1,2/3] net: phy: at803x: AR8085: add loopback support [net-next,v1,1/3] net: phy: micrel: KSZ8081: add loopback support --- 2021-03-30 Oleksij Rempel New
[net-next,v1,1/3] net: phy: micrel: KSZ8081: add loopback support [net-next,v1,1/3] net: phy: micrel: KSZ8081: add loopback support --- 2021-03-30 Oleksij Rempel New
[v2,5/7] ARM: imx6q: remove Atheros AR8035 SmartEEE fixup remove different PHY fixups --- 2021-03-09 Oleksij Rempel New
[v2,3/7] ARM: imx6q: remove hand crafted PHY power up in ar8035_phy_fixup() remove different PHY fixups --- 2021-03-09 Oleksij Rempel New
[net,v3,1/1] can: can_skb_set_owner(): fix ref counting if socket was closed before setting skb ownership [net,v3,1/1] can: can_skb_set_owner(): fix ref counting if socket was closed before setting skb o... --- 2021-02-24 Oleksij Rempel New
[net,v4,1/1] net: introduce CAN specific pointer in the struct net_device [net,v4,1/1] net: introduce CAN specific pointer in the struct net_device --- 2021-02-23 Oleksij Rempel New
[net,v2,2/2] can: fix ref count warning if socket was closed before skb was cloned add support for skb with sk ref cloning --- 2021-02-23 Oleksij Rempel New
[net,v2,1/2] skbuff: skb_clone_sk_optional(): add function to always clone a skb and increase refcount on sk if valid add support for skb with sk ref cloning --- 2021-02-23 Oleksij Rempel New
[v1,1/7] ARM i.MX6q: remove PHY fixup for KSZ9031 [v1,1/7] ARM i.MX6q: remove PHY fixup for KSZ9031 --- 2021-02-03 Oleksij Rempel New
[RFC,net,2/2] net: can: j1939: fix check for valid CAN devices Untitled series #94180 --- 2021-01-15 Oleksij Rempel New
[net-next,v8,2/2] net: dsa: qca: ar9331: export stats64 [net-next,v8,1/2] net: dsa: add optional stats64 support --- 2021-01-11 Oleksij Rempel New
[net-next,v8,1/2] net: dsa: add optional stats64 support [net-next,v8,1/2] net: dsa: add optional stats64 support --- 2021-01-11 Oleksij Rempel New
[v5,2/2] net: dsa: qca: ar9331: export stats64 [v5,1/2] net: dsa: add optional stats64 support --- 2020-12-11 Oleksij Rempel New
[v5,1/2] net: dsa: add optional stats64 support [v5,1/2] net: dsa: add optional stats64 support --- 2020-12-11 Oleksij Rempel New
[v1] ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup [v1] ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup --- 2020-12-09 Oleksij Rempel New
[net,v1] net: dsa: qca: ar9331: fix sleeping function called from invalid context bug [net,v1] net: dsa: qca: ar9331: fix sleeping function called from invalid context bug --- 2020-12-04 Oleksij Rempel New
[v4,net-next,2/2] net: dsa: qca: ar9331: export stats64 net: dsa: add stats64 support --- 2020-12-04 Oleksij Rempel New
[v1] net: phy: micrel: fix interrupt handling [v1] net: phy: micrel: fix interrupt handling --- 2020-11-27 Oleksij Rempel New
[RFC,v1,6/6] can: flexcan: add ethtool support add initial CAN PHY support --- 2020-10-23 Oleksij Rempel New
[RFC,v1,5/6] can: flexcan: add phylink support add initial CAN PHY support --- 2020-10-23 Oleksij Rempel New
[RFC,v1,4/6] net: add CAN specific link modes add initial CAN PHY support --- 2020-10-23 Oleksij Rempel New
[RFC,v1,3/6] net: phy: add CAN interface mode add initial CAN PHY support --- 2020-10-23 Oleksij Rempel New
[RFC,v1,2/6] net: phy: add a driver for generic CAN PHYs add initial CAN PHY support --- 2020-10-23 Oleksij Rempel New
[RFC,v1,1/6] net: phy: add CAN PHY Virtual Bus add initial CAN PHY support --- 2020-10-23 Oleksij Rempel New
« 1 2 »