From patchwork Mon Jun 14 11:28:46 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "huangguangbin \(A\)" X-Patchwork-Id: 460150 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 54F9EC48BE8 for ; Mon, 14 Jun 2021 11:35:13 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 306B6611CA for ; Mon, 14 Jun 2021 11:35:13 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236417AbhFNLhN (ORCPT ); Mon, 14 Jun 2021 07:37:13 -0400 Received: from szxga02-in.huawei.com ([45.249.212.188]:4435 "EHLO szxga02-in.huawei.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235722AbhFNLeJ (ORCPT ); Mon, 14 Jun 2021 07:34:09 -0400 Received: from dggemv711-chm.china.huawei.com (unknown [172.30.72.55]) by szxga02-in.huawei.com (SkyGuard) with ESMTP id 4G3Tjg5wW2z6yZ7; Mon, 14 Jun 2021 19:28:55 +0800 (CST) Received: from dggemi759-chm.china.huawei.com (10.1.198.145) by dggemv711-chm.china.huawei.com (10.1.198.66) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256) id 15.1.2176.2; Mon, 14 Jun 2021 19:32:03 +0800 Received: from localhost.localdomain (10.67.165.24) by dggemi759-chm.china.huawei.com (10.1.198.145) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.2176.2; Mon, 14 Jun 2021 19:32:03 +0800 From: Guangbin Huang To: , , , , CC: , , , Subject: [PATCH V2 net-next 06/11] net: z85230: fix the comments style issue Date: Mon, 14 Jun 2021 19:28:46 +0800 Message-ID: <1623670131-49973-7-git-send-email-huangguangbin2@huawei.com> X-Mailer: git-send-email 2.8.1 In-Reply-To: <1623670131-49973-1-git-send-email-huangguangbin2@huawei.com> References: <1623670131-49973-1-git-send-email-huangguangbin2@huawei.com> MIME-Version: 1.0 X-Originating-IP: [10.67.165.24] X-ClientProxiedBy: dggems705-chm.china.huawei.com (10.3.19.182) To dggemi759-chm.china.huawei.com (10.1.198.145) X-CFilter-Loop: Reflected Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org From: Peng Li Networking block comments don't use an empty /* line, use /* Comment... Block comments use * on subsequent lines. Block comments use a trailing */ on a separate line. This patch fixes the comments style issues. Signed-off-by: Peng Li Signed-off-by: Guangbin Huang --- drivers/net/wan/z85230.c | 214 ++++++++++++++++++----------------------------- 1 file changed, 83 insertions(+), 131 deletions(-) diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c index ced746d..a3a2051 100644 --- a/drivers/net/wan/z85230.c +++ b/drivers/net/wan/z85230.c @@ -1,7 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-or-later -/* - * - * (c) Copyright 1998 Alan Cox +/* (c) Copyright 1998 Alan Cox * (c) Copyright 2000, 2001 Red Hat Inc * * Development of this driver was funded by Equiinet Ltd @@ -183,8 +181,7 @@ static inline void write_zsdata(struct z8530_channel *c, u8 val) z8530_write_port(c->dataio, val); } -/* - * Register loading parameters for a dead port +/* Register loading parameters for a dead port */ u8 z8530_dead_port[]= @@ -193,12 +190,10 @@ u8 z8530_dead_port[]= }; EXPORT_SYMBOL(z8530_dead_port); -/* - * Register loading parameters for currently supported circuit types +/* Register loading parameters for currently supported circuit types */ -/* - * Data clocked by telco end. This is the correct data for the UK +/* Data clocked by telco end. This is the correct data for the UK * "kilostream" service, and most other similar services. */ @@ -222,8 +217,7 @@ u8 z8530_hdlc_kilostream[]= }; EXPORT_SYMBOL(z8530_hdlc_kilostream); -/* - * As above but for enhanced chips. +/* As above but for enhanced chips. */ u8 z8530_hdlc_kilostream_85230[]= @@ -331,8 +325,7 @@ static void z8530_rx(struct z8530_channel *c) ch=read_zsdata(c); stat=read_zsreg(c, R1); - /* - * Overrun ? + /* Overrun ? */ if(c->count < c->max) { @@ -342,8 +335,7 @@ static void z8530_rx(struct z8530_channel *c) if(stat&END_FR) { - /* - * Error ? + /* Error ? */ if(stat&(Rx_OVR|CRC_ERR)) { @@ -365,8 +357,7 @@ static void z8530_rx(struct z8530_channel *c) } else { - /* - * Drop the lock for RX processing, or + /* Drop the lock for RX processing, or * there are deadlocks */ z8530_rx_done(c); @@ -374,8 +365,7 @@ static void z8530_rx(struct z8530_channel *c) } } } - /* - * Clear irq + /* Clear irq */ write_zsctrl(c, ERR_RES); write_zsctrl(c, RES_H_IUS); @@ -398,8 +388,7 @@ static void z8530_tx(struct z8530_channel *c) if(!(read_zsreg(c, R0)&4)) return; c->txcount--; - /* - * Shovel out the byte + /* Shovel out the byte */ write_zsreg(c, R8, *c->tx_ptr++); write_zsctrl(c, RES_H_IUS); @@ -411,8 +400,7 @@ static void z8530_tx(struct z8530_channel *c) } } - /* - * End of frame TX - fire another one + /* End of frame TX - fire another one */ write_zsctrl(c, RES_Tx_P); @@ -607,8 +595,7 @@ static struct z8530_irqhandler z8530_txdma_sync = { static void z8530_rx_clear(struct z8530_channel *c) { - /* - * Data and status bytes + /* Data and status bytes */ u8 stat; @@ -617,8 +604,7 @@ static void z8530_rx_clear(struct z8530_channel *c) if(stat&END_FR) write_zsctrl(c, RES_Rx_CRC); - /* - * Clear irq + /* Clear irq */ write_zsctrl(c, ERR_RES); write_zsctrl(c, RES_H_IUS); @@ -704,11 +690,13 @@ irqreturn_t z8530_interrupt(int irq, void *dev_id) if(!(intr & (CHARxIP|CHATxIP|CHAEXT|CHBRxIP|CHBTxIP|CHBEXT))) break; - /* This holds the IRQ status. On the 8530 you must read it from chan - A even though it applies to the whole chip */ + /* This holds the IRQ status. On the 8530 you must read it + * from chan A even though it applies to the whole chip + */ /* Now walk the chip and see what it is wanting - it may be - an IRQ for someone else remember */ + * an IRQ for someone else remember + */ irqs=dev->chanA.irqs; @@ -835,14 +823,13 @@ int z8530_sync_dma_open(struct net_device *dev, struct z8530_channel *c) c->count = 0; c->skb = NULL; c->skb2 = NULL; - /* - * Load the DMA interfaces up + + /* Load the DMA interfaces up */ c->rxdma_on = 0; c->txdma_on = 0; - - /* - * Allocate the DMA flip buffers. Limit by page size. + + /* Allocate the DMA flip buffers. Limit by page size. * Everyone runs 1500 mtu or less on wan links so this * should be fine. */ @@ -869,14 +856,12 @@ int z8530_sync_dma_open(struct net_device *dev, struct z8530_channel *c) c->dma_num=0; c->dma_ready=1; - /* - * Enable DMA control mode + /* Enable DMA control mode */ spin_lock_irqsave(c->lock, cflags); - - /* - * TX DMA via DIR/REQ + + /* TX DMA via DIR/REQ */ c->regs[R14]|= DTRREQ; @@ -884,9 +869,8 @@ int z8530_sync_dma_open(struct net_device *dev, struct z8530_channel *c) c->regs[R1]&= ~TxINT_ENAB; write_zsreg(c, R1, c->regs[R1]); - - /* - * RX DMA via W/Req + + /* RX DMA via W/Req */ c->regs[R1]|= WT_FN_RDYFN; @@ -896,13 +880,11 @@ int z8530_sync_dma_open(struct net_device *dev, struct z8530_channel *c) write_zsreg(c, R1, c->regs[R1]); c->regs[R1]|= WT_RDY_ENAB; write_zsreg(c, R1, c->regs[R1]); - - /* - * DMA interrupts + + /* DMA interrupts */ - - /* - * Set up the DMA configuration + + /* Set up the DMA configuration */ dflags=claim_dma_lock(); @@ -920,9 +902,8 @@ int z8530_sync_dma_open(struct net_device *dev, struct z8530_channel *c) disable_dma(c->txdma); release_dma_lock(dflags); - - /* - * Select the DMA interrupt handlers + + /* Select the DMA interrupt handlers */ c->rxdma_on = 1; @@ -956,9 +937,8 @@ int z8530_sync_dma_close(struct net_device *dev, struct z8530_channel *c) c->irqs = &z8530_nop; c->max = 0; c->sync = 0; - - /* - * Disable the PC DMA channels + + /* Disable the PC DMA channels */ flags=claim_dma_lock(); @@ -976,8 +956,7 @@ int z8530_sync_dma_close(struct net_device *dev, struct z8530_channel *c) spin_lock_irqsave(c->lock, flags); - /* - * Disable DMA control mode + /* Disable DMA control mode */ c->regs[R1]&= ~WT_RDY_ENAB; @@ -1028,9 +1007,8 @@ int z8530_sync_txdma_open(struct net_device *dev, struct z8530_channel *c) c->count = 0; c->skb = NULL; c->skb2 = NULL; - - /* - * Allocate the DMA flip buffers. Limit by page size. + + /* Allocate the DMA flip buffers. Limit by page size. * Everyone runs 1500 mtu or less on wan links so this * should be fine. */ @@ -1046,15 +1024,13 @@ int z8530_sync_txdma_open(struct net_device *dev, struct z8530_channel *c) spin_lock_irqsave(c->lock, cflags); - /* - * Load the PIO receive ring + /* Load the PIO receive ring */ z8530_rx_done(c); z8530_rx_done(c); - /* - * Load the DMA interfaces up + /* Load the DMA interfaces up */ c->rxdma_on = 0; @@ -1065,21 +1041,18 @@ int z8530_sync_txdma_open(struct net_device *dev, struct z8530_channel *c) c->dma_ready=1; c->dma_tx = 1; - /* - * Enable DMA control mode + /* Enable DMA control mode */ - /* - * TX DMA via DIR/REQ + /* TX DMA via DIR/REQ */ c->regs[R14]|= DTRREQ; write_zsreg(c, R14, c->regs[R14]); c->regs[R1]&= ~TxINT_ENAB; write_zsreg(c, R1, c->regs[R1]); - - /* - * Set up the DMA configuration + + /* Set up the DMA configuration */ dflags = claim_dma_lock(); @@ -1090,9 +1063,8 @@ int z8530_sync_txdma_open(struct net_device *dev, struct z8530_channel *c) disable_dma(c->txdma); release_dma_lock(dflags); - - /* - * Select the DMA interrupt handlers + + /* Select the DMA interrupt handlers */ c->rxdma_on = 0; @@ -1127,9 +1099,8 @@ int z8530_sync_txdma_close(struct net_device *dev, struct z8530_channel *c) c->irqs = &z8530_nop; c->max = 0; c->sync = 0; - - /* - * Disable the PC DMA channels + + /* Disable the PC DMA channels */ dflags = claim_dma_lock(); @@ -1141,8 +1112,7 @@ int z8530_sync_txdma_close(struct net_device *dev, struct z8530_channel *c) release_dma_lock(dflags); - /* - * Disable DMA control mode + /* Disable DMA control mode */ c->regs[R1]&= ~WT_RDY_ENAB; @@ -1167,8 +1137,7 @@ int z8530_sync_txdma_close(struct net_device *dev, struct z8530_channel *c) } EXPORT_SYMBOL(z8530_sync_txdma_close); -/* - * Name strings for Z8530 chips. SGI claim to have a 130, Zilog deny +/* Name strings for Z8530 chips. SGI claim to have a 130, Zilog deny * it exists... */ @@ -1200,14 +1169,14 @@ void z8530_describe(struct z8530_dev *dev, char *mapping, unsigned long io) } EXPORT_SYMBOL(z8530_describe); -/* - * Locked operation part of the z8530 init code +/* Locked operation part of the z8530 init code */ static inline int do_z8530_init(struct z8530_dev *dev) { /* NOP the interrupt handlers first - we might get a - floating IRQ transition when we reset the chip */ + * floating IRQ transition when we reset the chip + */ dev->chanA.irqs=&z8530_nop; dev->chanB.irqs=&z8530_nop; dev->chanA.dcdcheck=DCD; @@ -1225,15 +1194,13 @@ static inline int do_z8530_init(struct z8530_dev *dev) return -ENODEV; dev->type=Z8530; - - /* - * See the application note. + + /* See the application note. */ write_zsreg(&dev->chanA, R15, 0x01); - - /* - * If we can set the low bit of R15 then + + /* If we can set the low bit of R15 then * the chip is enhanced. */ @@ -1247,17 +1214,15 @@ static inline int do_z8530_init(struct z8530_dev *dev) else dev->type = Z85C30; /* Z85C30, 1 byte FIFO */ } - - /* - * The code assumes R7' and friends are + + /* The code assumes R7' and friends are * off. Use write_zsext() for these and keep * this bit clear. */ write_zsreg(&dev->chanA, R15, 0); - - /* - * At this point it looks like the chip is behaving + + /* At this point it looks like the chip is behaving */ memcpy(dev->chanA.regs, reg_init, 16); @@ -1404,8 +1369,7 @@ static void z8530_tx_begin(struct z8530_channel *c) { flags=claim_dma_lock(); disable_dma(c->txdma); - /* - * Check if we crapped out. + /* Check if we crapped out. */ if (get_dma_residue(c->txdma)) { @@ -1422,8 +1386,7 @@ static void z8530_tx_begin(struct z8530_channel *c) if(c->dma_tx) { - /* - * FIXME. DMA is broken for the original 8530, + /* FIXME. DMA is broken for the original 8530, * on the older parts we need to set a flag and * wait for a further TX interrupt to fire this * stage off @@ -1432,8 +1395,7 @@ static void z8530_tx_begin(struct z8530_channel *c) flags=claim_dma_lock(); disable_dma(c->txdma); - /* - * These two are needed by the 8530/85C30 + /* These two are needed by the 8530/85C30 * and must be issued when idling. */ @@ -1464,8 +1426,7 @@ static void z8530_tx_begin(struct z8530_channel *c) } } } - /* - * Since we emptied tx_skb we can ask for more + /* Since we emptied tx_skb we can ask for more */ netif_wake_queue(c->netdevice); } @@ -1529,22 +1490,19 @@ static void z8530_rx_done(struct z8530_channel *c) { struct sk_buff *skb; int ct; - - /* - * Is our receive engine in DMA mode + + /* Is our receive engine in DMA mode */ if(c->rxdma_on) { - /* - * Save the ready state and the buffer currently + /* Save the ready state and the buffer currently * being used as the DMA target */ int ready=c->dma_ready; unsigned char *rxb=c->rx_buf[c->dma_num]; unsigned long flags; - - /* - * Complete this DMA. Necessary to find the length + + /* Complete this DMA. Necessary to find the length */ flags=claim_dma_lock(); @@ -1555,9 +1513,8 @@ static void z8530_rx_done(struct z8530_channel *c) if(ct<0) ct=2; /* Shit happens.. */ c->dma_ready=0; - - /* - * Normal case: the other slot is free, start the next DMA + + /* Normal case: the other slot is free, start the next DMA * into it immediately. */ @@ -1569,19 +1526,20 @@ static void z8530_rx_done(struct z8530_channel *c) set_dma_count(c->rxdma, c->mtu); c->rxdma_on = 1; enable_dma(c->rxdma); - /* Stop any frames that we missed the head of - from passing */ + /* Stop any frames that we missed the head of + * from passing + */ write_zsreg(c, R0, RES_Rx_CRC); } else /* Can't occur as we dont reenable the DMA irq until - after the flip is done */ + * after the flip is done + */ netdev_warn(c->netdevice, "DMA flip overrun!\n"); release_dma_lock(flags); - /* - * Shove the old buffer into an sk_buff. We can't DMA + /* Shove the old buffer into an sk_buff. We can't DMA * directly into one on a PC - it might be above the 16Mb * boundary. Optimisation - we could check to see if we * can avoid the copy. Optimisation 2 - make the memcpy @@ -1603,8 +1561,7 @@ static void z8530_rx_done(struct z8530_channel *c) RT_LOCK; skb = c->skb; - /* - * The game we play for non DMA is similar. We want to + /* The game we play for non DMA is similar. We want to * get the controller set up for the next packet as fast * as possible. We potentially only have one byte + the * fifo length for this. Thus we want to flip to the new @@ -1637,8 +1594,7 @@ static void z8530_rx_done(struct z8530_channel *c) c->netdevice->stats.rx_packets++; c->netdevice->stats.rx_bytes += ct; } - /* - * If we received a frame we must now process it. + /* If we received a frame we must now process it. */ if (skb) { skb_trim(skb, ct); @@ -1690,16 +1646,13 @@ netdev_tx_t z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb) return NETDEV_TX_BUSY; /* PC SPECIFIC - DMA limits */ - - /* - * If we will DMA the transmit and its gone over the ISA bus + /* If we will DMA the transmit and its gone over the ISA bus * limit, then copy to the flip buffer */ if(c->dma_tx && ((unsigned long)(virt_to_bus(skb->data+skb->len))>=16*1024*1024 || spans_boundary(skb))) { - /* - * Send the flip buffer, and flip the flippy bit. + /* Send the flip buffer, and flip the flippy bit. * We don't care which is used when just so long as * we never use the same buffer twice in a row. Since * only one buffer can be going out at a time the other @@ -1723,8 +1676,7 @@ netdev_tx_t z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb) } EXPORT_SYMBOL(z8530_queue_xmit); -/* - * Module support +/* Module support */ static const char banner[] __initconst = KERN_INFO "Generic Z85C30/Z85230 interface driver v0.02\n";