From patchwork Tue Apr 14 18:20:29 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Marek Vasut X-Patchwork-Id: 221184 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-9.8 required=3.0 tests=HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5A4B7C2BA19 for ; Tue, 14 Apr 2020 18:24:04 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 31DE52054F for ; Tue, 14 Apr 2020 18:24:04 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2503871AbgDNSYC (ORCPT ); Tue, 14 Apr 2020 14:24:02 -0400 Received: from mail-out.m-online.net ([212.18.0.10]:58157 "EHLO mail-out.m-online.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2503813AbgDNSVq (ORCPT ); Tue, 14 Apr 2020 14:21:46 -0400 Received: from frontend01.mail.m-online.net (unknown [192.168.8.182]) by mail-out.m-online.net (Postfix) with ESMTP id 491v2M5M7tz1rrW7; Tue, 14 Apr 2020 20:21:31 +0200 (CEST) Received: from localhost (dynscan1.mnet-online.de [192.168.6.70]) by mail.m-online.net (Postfix) with ESMTP id 491v2M55Wpz1qqkS; Tue, 14 Apr 2020 20:21:31 +0200 (CEST) X-Virus-Scanned: amavisd-new at mnet-online.de Received: from mail.mnet-online.de ([192.168.8.182]) by localhost (dynscan1.mail.m-online.net [192.168.6.70]) (amavisd-new, port 10024) with ESMTP id TyZYPyHqq0Oe; Tue, 14 Apr 2020 20:21:28 +0200 (CEST) X-Auth-Info: T3SfJQejM7S34FJxCqYYvdXvyxAzUNjEZuangxrVCh8= Received: from desktop.lan (ip-86-49-35-8.net.upcbroadband.cz [86.49.35.8]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.mnet-online.de (Postfix) with ESMTPSA; Tue, 14 Apr 2020 20:21:28 +0200 (CEST) From: Marek Vasut To: netdev@vger.kernel.org Cc: Marek Vasut , "David S . Miller" , Lukas Wunner , Petr Stetiar , YueHaibing Subject: [PATCH V4 19/19] net: ks8851: Remove ks8851_mll.c Date: Tue, 14 Apr 2020 20:20:29 +0200 Message-Id: <20200414182029.183594-20-marex@denx.de> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20200414182029.183594-1-marex@denx.de> References: <20200414182029.183594-1-marex@denx.de> MIME-Version: 1.0 Sender: netdev-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: netdev@vger.kernel.org The ks8851_mll.c is replaced by ks8851_par.c, which is using common code from ks8851.c, just like ks8851_spi.c . Remove this old ad-hoc driver. Signed-off-by: Marek Vasut Cc: David S. Miller Cc: Lukas Wunner Cc: Petr Stetiar Cc: YueHaibing --- V2: No change V3: No change V4: No change --- drivers/net/ethernet/micrel/ks8851_mll.c | 1393 ---------------------- 1 file changed, 1393 deletions(-) delete mode 100644 drivers/net/ethernet/micrel/ks8851_mll.c diff --git a/drivers/net/ethernet/micrel/ks8851_mll.c b/drivers/net/ethernet/micrel/ks8851_mll.c deleted file mode 100644 index 45cc840d8e2e..000000000000 --- a/drivers/net/ethernet/micrel/ks8851_mll.c +++ /dev/null @@ -1,1393 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/** - * drivers/net/ethernet/micrel/ks8851_mll.c - * Copyright (c) 2009 Micrel Inc. - */ - -/* Supports: - * KS8851 16bit MLL chip from Micrel Inc. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "ks8851.h" - -#define DRV_NAME "ks8851_mll" - -static u8 KS_DEFAULT_MAC_ADDRESS[] = { 0x00, 0x10, 0xA1, 0x86, 0x95, 0x11 }; -#define MAX_RECV_FRAMES 255 -#define MAX_BUF_SIZE 2048 -#define TX_BUF_SIZE 2000 -#define RX_BUF_SIZE 2000 - -#define RXCR1_FILTER_MASK (RXCR1_RXINVF | RXCR1_RXAE | \ - RXCR1_RXMAFMA | RXCR1_RXPAFMA) -#define RXQCR_CMD_CNTL (RXQCR_RXFCTE|RXQCR_ADRFE) - -#define ENUM_BUS_NONE 0 -#define ENUM_BUS_8BIT 1 -#define ENUM_BUS_16BIT 2 -#define ENUM_BUS_32BIT 3 - -#define MAX_MCAST_LST 32 -#define HW_MCAST_SIZE 8 - -/** - * union ks_tx_hdr - tx header data - * @txb: The header as bytes - * @txw: The header as 16bit, little-endian words - * - * A dual representation of the tx header data to allow - * access to individual bytes, and to allow 16bit accesses - * with 16bit alignment. - */ -union ks_tx_hdr { - u8 txb[4]; - __le16 txw[2]; -}; - -/** - * struct ks_net - KS8851 driver private data - * @net_device : The network device we're bound to - * @hw_addr : start address of data register. - * @hw_addr_cmd : start address of command register. - * @txh : temporaly buffer to save status/length. - * @lock : Lock to ensure that the device is not accessed when busy. - * @pdev : Pointer to platform device. - * @mii : The MII state information for the mii calls. - * @frame_head_info : frame header information for multi-pkt rx. - * @statelock : Lock on this structure for tx list. - * @msg_enable : The message flags controlling driver output (see ethtool). - * @frame_cnt : number of frames received. - * @bus_width : i/o bus width. - * @rc_rxqcr : Cached copy of KS_RXQCR. - * @rc_txcr : Cached copy of KS_TXCR. - * @rc_ier : Cached copy of KS_IER. - * @sharedbus : Multipex(addr and data bus) mode indicator. - * @cmd_reg_cache : command register cached. - * @cmd_reg_cache_int : command register cached. Used in the irq handler. - * @promiscuous : promiscuous mode indicator. - * @all_mcast : mutlicast indicator. - * @mcast_lst_size : size of multicast list. - * @mcast_lst : multicast list. - * @mcast_bits : multicast enabed. - * @mac_addr : MAC address assigned to this device. - * @fid : frame id. - * @extra_byte : number of extra byte prepended rx pkt. - * @enabled : indicator this device works. - * - * The @lock ensures that the chip is protected when certain operations are - * in progress. When the read or write packet transfer is in progress, most - * of the chip registers are not accessible until the transfer is finished and - * the DMA has been de-asserted. - * - * The @statelock is used to protect information in the structure which may - * need to be accessed via several sources, such as the network driver layer - * or one of the work queues. - * - */ - -/* Receive multiplex framer header info */ -struct type_frame_head { - u16 sts; /* Frame status */ - u16 len; /* Byte count */ -}; - -struct ks_net { - struct net_device *netdev; - void __iomem *hw_addr; - void __iomem *hw_addr_cmd; - union ks_tx_hdr txh ____cacheline_aligned; - struct mutex lock; /* spinlock to be interrupt safe */ - struct platform_device *pdev; - struct mii_if_info mii; - struct type_frame_head *frame_head_info; - spinlock_t statelock; - u32 msg_enable; - u32 frame_cnt; - int bus_width; - - u16 rc_rxqcr; - u16 rc_txcr; - u16 rc_ier; - u16 sharedbus; - u16 cmd_reg_cache; - u16 cmd_reg_cache_int; - u16 promiscuous; - u16 all_mcast; - u16 mcast_lst_size; - u8 mcast_lst[MAX_MCAST_LST][ETH_ALEN]; - u8 mcast_bits[HW_MCAST_SIZE]; - u8 mac_addr[6]; - u8 fid; - u8 extra_byte; - u8 enabled; -}; - -static int msg_enable; - -#define BE3 0x8000 /* Byte Enable 3 */ -#define BE2 0x4000 /* Byte Enable 2 */ -#define BE1 0x2000 /* Byte Enable 1 */ -#define BE0 0x1000 /* Byte Enable 0 */ - -/* register read/write calls. - * - * All these calls issue transactions to access the chip's registers. They - * all require that the necessary lock is held to prevent accesses when the - * chip is busy transferring packet data (RX/TX FIFO accesses). - */ - -/** - * ks_check_endian - Check whether endianness of the bus is correct - * @ks : The chip information - * - * The KS8851-16MLL EESK pin allows selecting the endianness of the 16bit - * bus. To maintain optimum performance, the bus endianness should be set - * such that it matches the endianness of the CPU. - */ - -static int ks_check_endian(struct ks_net *ks) -{ - u16 cider; - - /* - * Read CIDER register first, however read it the "wrong" way around. - * If the endian strap on the KS8851-16MLL in incorrect and the chip - * is operating in different endianness than the CPU, then the meaning - * of BE[3:0] byte-enable bits is also swapped such that: - * BE[3,2,1,0] becomes BE[1,0,3,2] - * - * Luckily for us, the byte-enable bits are the top four MSbits of - * the address register and the CIDER register is at offset 0xc0. - * Hence, by reading address 0xc0c0, which is not impacted by endian - * swapping, we assert either BE[3:2] or BE[1:0] while reading the - * CIDER register. - * - * If the bus configuration is correct, reading 0xc0c0 asserts - * BE[3:2] and this read returns 0x0000, because to read register - * with bottom two LSbits of address set to 0, BE[1:0] must be - * asserted. - * - * If the bus configuration is NOT correct, reading 0xc0c0 asserts - * BE[1:0] and this read returns non-zero 0x8872 value. - */ - iowrite16(BE3 | BE2 | KS_CIDER, ks->hw_addr_cmd); - cider = ioread16(ks->hw_addr); - if (!cider) - return 0; - - netdev_err(ks->netdev, "incorrect EESK endian strap setting\n"); - - return -EINVAL; -} - -/** - * ks_rdreg16 - read 16 bit register from device - * @ks : The chip information - * @offset: The register address - * - * Read a 16bit register from the chip, returning the result - */ - -static u16 ks_rdreg16(struct ks_net *ks, int offset) -{ - ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02)); - iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd); - return ioread16(ks->hw_addr); -} - -/** - * ks_wrreg16 - write 16bit register value to chip - * @ks: The chip information - * @offset: The register address - * @value: The value to write - * - */ - -static void ks_wrreg16(struct ks_net *ks, int offset, u16 value) -{ - ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02)); - iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd); - iowrite16(value, ks->hw_addr); -} - -/** - * ks_inblk - read a block of data from QMU. This is called after sudo DMA mode enabled. - * @ks: The chip state - * @wptr: buffer address to save data - * @len: length in byte to read - * - */ -static inline void ks_inblk(struct ks_net *ks, u16 *wptr, u32 len) -{ - len >>= 1; - while (len--) - *wptr++ = (u16)ioread16(ks->hw_addr); -} - -/** - * ks_outblk - write data to QMU. This is called after sudo DMA mode enabled. - * @ks: The chip information - * @wptr: buffer address - * @len: length in byte to write - * - */ -static inline void ks_outblk(struct ks_net *ks, u16 *wptr, u32 len) -{ - len >>= 1; - while (len--) - iowrite16(*wptr++, ks->hw_addr); -} - -static void ks_disable_int(struct ks_net *ks) -{ - ks_wrreg16(ks, KS_IER, 0x0000); -} /* ks_disable_int */ - -static void ks_enable_int(struct ks_net *ks) -{ - ks_wrreg16(ks, KS_IER, ks->rc_ier); -} /* ks_enable_int */ - -/** - * ks_tx_fifo_space - return the available hardware buffer size. - * @ks: The chip information - * - */ -static inline u16 ks_tx_fifo_space(struct ks_net *ks) -{ - return ks_rdreg16(ks, KS_TXMIR) & 0x1fff; -} - -/** - * ks_save_cmd_reg - save the command register from the cache. - * @ks: The chip information - * - */ -static inline void ks_save_cmd_reg(struct ks_net *ks) -{ - /*ks8851 MLL has a bug to read back the command register. - * So rely on software to save the content of command register. - */ - ks->cmd_reg_cache_int = ks->cmd_reg_cache; -} - -/** - * ks_restore_cmd_reg - restore the command register from the cache and - * write to hardware register. - * @ks: The chip information - * - */ -static inline void ks_restore_cmd_reg(struct ks_net *ks) -{ - ks->cmd_reg_cache = ks->cmd_reg_cache_int; - iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd); -} - -/** - * ks_set_powermode - set power mode of the device - * @ks: The chip information - * @pwrmode: The power mode value to write to KS_PMECR. - * - * Change the power mode of the chip. - */ -static void ks_set_powermode(struct ks_net *ks, unsigned pwrmode) -{ - unsigned pmecr; - - netif_dbg(ks, hw, ks->netdev, "setting power mode %d\n", pwrmode); - - ks_rdreg16(ks, KS_GRR); - pmecr = ks_rdreg16(ks, KS_PMECR); - pmecr &= ~PMECR_PM_MASK; - pmecr |= pwrmode; - - ks_wrreg16(ks, KS_PMECR, pmecr); -} - -/** - * ks_read_config - read chip configuration of bus width. - * @ks: The chip information - * - */ -static void ks_read_config(struct ks_net *ks) -{ - u16 reg_data = 0; - - /* Regardless of bus width, 8 bit read should always work.*/ - reg_data = ks_rdreg16(ks, KS_CCR); - - /* addr/data bus are multiplexed */ - ks->sharedbus = (reg_data & CCR_SHARED) == CCR_SHARED; - - /* There are garbage data when reading data from QMU, - depending on bus-width. - */ - - if (reg_data & CCR_8BIT) { - ks->bus_width = ENUM_BUS_8BIT; - ks->extra_byte = 1; - } else if (reg_data & CCR_16BIT) { - ks->bus_width = ENUM_BUS_16BIT; - ks->extra_byte = 2; - } else { - ks->bus_width = ENUM_BUS_32BIT; - ks->extra_byte = 4; - } -} - -/** - * ks_soft_reset - issue one of the soft reset to the device - * @ks: The device state. - * @op: The bit(s) to set in the GRR - * - * Issue the relevant soft-reset command to the device's GRR register - * specified by @op. - * - * Note, the delays are in there as a caution to ensure that the reset - * has time to take effect and then complete. Since the datasheet does - * not currently specify the exact sequence, we have chosen something - * that seems to work with our device. - */ -static void ks_soft_reset(struct ks_net *ks, unsigned op) -{ - /* Disable interrupt first */ - ks_wrreg16(ks, KS_IER, 0x0000); - ks_wrreg16(ks, KS_GRR, op); - mdelay(10); /* wait a short time to effect reset */ - ks_wrreg16(ks, KS_GRR, 0); - mdelay(1); /* wait for condition to clear */ -} - - -static void ks_enable_qmu(struct ks_net *ks) -{ - u16 w; - - w = ks_rdreg16(ks, KS_TXCR); - /* Enables QMU Transmit (TXCR). */ - ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE); - - /* - * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame - * Enable - */ - - w = ks_rdreg16(ks, KS_RXQCR); - ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE); - - /* Enables QMU Receive (RXCR1). */ - w = ks_rdreg16(ks, KS_RXCR1); - ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE); - ks->enabled = true; -} /* ks_enable_qmu */ - -static void ks_disable_qmu(struct ks_net *ks) -{ - u16 w; - - w = ks_rdreg16(ks, KS_TXCR); - - /* Disables QMU Transmit (TXCR). */ - w &= ~TXCR_TXE; - ks_wrreg16(ks, KS_TXCR, w); - - /* Disables QMU Receive (RXCR1). */ - w = ks_rdreg16(ks, KS_RXCR1); - w &= ~RXCR1_RXE ; - ks_wrreg16(ks, KS_RXCR1, w); - - ks->enabled = false; - -} /* ks_disable_qmu */ - -/** - * ks_read_qmu - read 1 pkt data from the QMU. - * @ks: The chip information - * @buf: buffer address to save 1 pkt - * @len: Pkt length - * Here is the sequence to read 1 pkt: - * 1. set sudo DMA mode - * 2. read prepend data - * 3. read pkt data - * 4. reset sudo DMA Mode - */ -static inline void ks_read_qmu(struct ks_net *ks, u16 *buf, u32 len) -{ - u32 r = ks->extra_byte & 0x1 ; - u32 w = ks->extra_byte - r; - - /* 1. set sudo DMA mode */ - ks_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI); - ks_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_SDA); - - /* 2. read prepend data */ - /** - * read 4 + extra bytes and discard them. - * extra bytes for dummy, 2 for status, 2 for len - */ - - /* use likely(r) for 8 bit access for performance */ - if (unlikely(r)) - ioread8(ks->hw_addr); - ks_inblk(ks, buf, w + 2 + 2); - - /* 3. read pkt data */ - ks_inblk(ks, buf, ALIGN(len, 4)); - - /* 4. reset sudo DMA Mode */ - ks_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr); -} - -/** - * ks_rcv - read multiple pkts data from the QMU. - * @ks: The chip information - * @netdev: The network device being opened. - * - * Read all of header information before reading pkt content. - * It is not allowed only port of pkts in QMU after issuing - * interrupt ack. - */ -static void ks_rcv(struct ks_net *ks, struct net_device *netdev) -{ - u32 i; - struct type_frame_head *frame_hdr = ks->frame_head_info; - struct sk_buff *skb; - - ks->frame_cnt = ks_rdreg16(ks, KS_RXFCTR) >> 8; - - /* read all header information */ - for (i = 0; i < ks->frame_cnt; i++) { - /* Checking Received packet status */ - frame_hdr->sts = ks_rdreg16(ks, KS_RXFHSR); - /* Get packet len from hardware */ - frame_hdr->len = ks_rdreg16(ks, KS_RXFHBCR); - frame_hdr++; - } - - frame_hdr = ks->frame_head_info; - while (ks->frame_cnt--) { - if (unlikely(!(frame_hdr->sts & RXFSHR_RXFV) || - frame_hdr->len >= RX_BUF_SIZE || - frame_hdr->len <= 0)) { - - /* discard an invalid packet */ - ks_wrreg16(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_RRXEF)); - netdev->stats.rx_dropped++; - if (!(frame_hdr->sts & RXFSHR_RXFV)) - netdev->stats.rx_frame_errors++; - else - netdev->stats.rx_length_errors++; - frame_hdr++; - continue; - } - - skb = netdev_alloc_skb(netdev, frame_hdr->len + 16); - if (likely(skb)) { - skb_reserve(skb, 2); - /* read data block including CRC 4 bytes */ - ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len); - skb_put(skb, frame_hdr->len - 4); - skb->protocol = eth_type_trans(skb, netdev); - netif_rx(skb); - /* exclude CRC size */ - netdev->stats.rx_bytes += frame_hdr->len - 4; - netdev->stats.rx_packets++; - } else { - ks_wrreg16(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_RRXEF)); - netdev->stats.rx_dropped++; - } - frame_hdr++; - } -} - -/** - * ks_update_link_status - link status update. - * @netdev: The network device being opened. - * @ks: The chip information - * - */ - -static void ks_update_link_status(struct net_device *netdev, struct ks_net *ks) -{ - /* check the status of the link */ - u32 link_up_status; - if (ks_rdreg16(ks, KS_P1SR) & P1SR_LINK_GOOD) { - netif_carrier_on(netdev); - link_up_status = true; - } else { - netif_carrier_off(netdev); - link_up_status = false; - } - netif_dbg(ks, link, ks->netdev, - "%s: %s\n", __func__, link_up_status ? "UP" : "DOWN"); -} - -/** - * ks_irq - device interrupt handler - * @irq: Interrupt number passed from the IRQ handler. - * @pw: The private word passed to register_irq(), our struct ks_net. - * - * This is the handler invoked to find out what happened - * - * Read the interrupt status, work out what needs to be done and then clear - * any of the interrupts that are not needed. - */ - -static irqreturn_t ks_irq(int irq, void *pw) -{ - struct net_device *netdev = pw; - struct ks_net *ks = netdev_priv(netdev); - unsigned long flags; - u16 status; - - spin_lock_irqsave(&ks->statelock, flags); - /*this should be the first in IRQ handler */ - ks_save_cmd_reg(ks); - - status = ks_rdreg16(ks, KS_ISR); - if (unlikely(!status)) { - ks_restore_cmd_reg(ks); - spin_unlock_irqrestore(&ks->statelock, flags); - return IRQ_NONE; - } - - ks_wrreg16(ks, KS_ISR, status); - - if (likely(status & IRQ_RXI)) - ks_rcv(ks, netdev); - - if (unlikely(status & IRQ_LCI)) - ks_update_link_status(netdev, ks); - - if (unlikely(status & IRQ_TXI)) - netif_wake_queue(netdev); - - if (unlikely(status & IRQ_LDI)) { - - u16 pmecr = ks_rdreg16(ks, KS_PMECR); - pmecr &= ~PMECR_WKEVT_MASK; - ks_wrreg16(ks, KS_PMECR, pmecr | PMECR_WKEVT_LINK); - } - - if (unlikely(status & IRQ_RXOI)) - ks->netdev->stats.rx_over_errors++; - /* this should be the last in IRQ handler*/ - ks_restore_cmd_reg(ks); - spin_unlock_irqrestore(&ks->statelock, flags); - return IRQ_HANDLED; -} - - -/** - * ks_net_open - open network device - * @netdev: The network device being opened. - * - * Called when the network device is marked active, such as a user executing - * 'ifconfig up' on the device. - */ -static int ks_net_open(struct net_device *netdev) -{ - struct ks_net *ks = netdev_priv(netdev); - int err; - -#define KS_INT_FLAGS IRQF_TRIGGER_LOW - /* lock the card, even if we may not actually do anything - * else at the moment. - */ - - netif_dbg(ks, ifup, ks->netdev, "%s - entry\n", __func__); - - /* reset the HW */ - err = request_irq(netdev->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, netdev); - - if (err) { - pr_err("Failed to request IRQ: %d: %d\n", netdev->irq, err); - return err; - } - - /* wake up powermode to normal mode */ - ks_set_powermode(ks, PMECR_PM_NORMAL); - mdelay(1); /* wait for normal mode to take effect */ - - ks_wrreg16(ks, KS_ISR, 0xffff); - ks_enable_int(ks); - ks_enable_qmu(ks); - netif_start_queue(ks->netdev); - - netif_dbg(ks, ifup, ks->netdev, "network device up\n"); - - return 0; -} - -/** - * ks_net_stop - close network device - * @netdev: The device being closed. - * - * Called to close down a network device which has been active. Cancell any - * work, shutdown the RX and TX process and then place the chip into a low - * power state whilst it is not being used. - */ -static int ks_net_stop(struct net_device *netdev) -{ - struct ks_net *ks = netdev_priv(netdev); - - netif_info(ks, ifdown, netdev, "shutting down\n"); - - netif_stop_queue(netdev); - - mutex_lock(&ks->lock); - - /* turn off the IRQs and ack any outstanding */ - ks_wrreg16(ks, KS_IER, 0x0000); - ks_wrreg16(ks, KS_ISR, 0xffff); - - /* shutdown RX/TX QMU */ - ks_disable_qmu(ks); - ks_disable_int(ks); - - /* set powermode to soft power down to save power */ - ks_set_powermode(ks, PMECR_PM_SOFTDOWN); - free_irq(netdev->irq, netdev); - mutex_unlock(&ks->lock); - return 0; -} - - -/** - * ks_write_qmu - write 1 pkt data to the QMU. - * @ks: The chip information - * @pdata: buffer address to save 1 pkt - * @len: Pkt length in byte - * Here is the sequence to write 1 pkt: - * 1. set sudo DMA mode - * 2. write status/length - * 3. write pkt data - * 4. reset sudo DMA Mode - * 5. reset sudo DMA mode - * 6. Wait until pkt is out - */ -static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len) -{ - /* start header at txb[0] to align txw entries */ - ks->txh.txw[0] = 0; - ks->txh.txw[1] = cpu_to_le16(len); - - /* 1. set sudo-DMA mode */ - ks_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr | RXQCR_SDA); - /* 2. write status/lenth info */ - ks_outblk(ks, ks->txh.txw, 4); - /* 3. write pkt data */ - ks_outblk(ks, (u16 *)pdata, ALIGN(len, 4)); - /* 4. reset sudo-DMA mode */ - ks_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr); - /* 5. Enqueue Tx(move the pkt from TX buffer into TXQ) */ - ks_wrreg16(ks, KS_TXQCR, TXQCR_METFE); - /* 6. wait until TXQCR_METFE is auto-cleared */ - while (ks_rdreg16(ks, KS_TXQCR) & TXQCR_METFE) - ; -} - -/** - * ks_start_xmit - transmit packet - * @skb : The buffer to transmit - * @netdev : The device used to transmit the packet. - * - * Called by the network layer to transmit the @skb. - * spin_lock_irqsave is required because tx and rx should be mutual exclusive. - * So while tx is in-progress, prevent IRQ interrupt from happenning. - */ -static netdev_tx_t ks_start_xmit(struct sk_buff *skb, struct net_device *netdev) -{ - netdev_tx_t retv = NETDEV_TX_OK; - struct ks_net *ks = netdev_priv(netdev); - unsigned long flags; - - spin_lock_irqsave(&ks->statelock, flags); - - /* Extra space are required: - * 4 byte for alignment, 4 for status/length, 4 for CRC - */ - - if (likely(ks_tx_fifo_space(ks) >= skb->len + 12)) { - ks_write_qmu(ks, skb->data, skb->len); - /* add tx statistics */ - netdev->stats.tx_bytes += skb->len; - netdev->stats.tx_packets++; - dev_kfree_skb(skb); - } else - retv = NETDEV_TX_BUSY; - spin_unlock_irqrestore(&ks->statelock, flags); - return retv; -} - -/** - * ks_start_rx - ready to serve pkts - * @ks : The chip information - * - */ -static void ks_start_rx(struct ks_net *ks) -{ - u16 cntl; - - /* Enables QMU Receive (RXCR1). */ - cntl = ks_rdreg16(ks, KS_RXCR1); - cntl |= RXCR1_RXE ; - ks_wrreg16(ks, KS_RXCR1, cntl); -} /* ks_start_rx */ - -/** - * ks_stop_rx - stop to serve pkts - * @ks : The chip information - * - */ -static void ks_stop_rx(struct ks_net *ks) -{ - u16 cntl; - - /* Disables QMU Receive (RXCR1). */ - cntl = ks_rdreg16(ks, KS_RXCR1); - cntl &= ~RXCR1_RXE ; - ks_wrreg16(ks, KS_RXCR1, cntl); - -} /* ks_stop_rx */ - -static unsigned long const ethernet_polynomial = CRC32_POLY_BE; - -static unsigned long ether_gen_crc(int length, u8 *data) -{ - long crc = -1; - while (--length >= 0) { - u8 current_octet = *data++; - int bit; - - for (bit = 0; bit < 8; bit++, current_octet >>= 1) { - crc = (crc << 1) ^ - ((crc < 0) ^ (current_octet & 1) ? - ethernet_polynomial : 0); - } - } - return (unsigned long)crc; -} /* ether_gen_crc */ - -/** -* ks_set_grpaddr - set multicast information -* @ks : The chip information -*/ - -static void ks_set_grpaddr(struct ks_net *ks) -{ - u8 i; - u32 index, position, value; - - memset(ks->mcast_bits, 0, sizeof(u8) * HW_MCAST_SIZE); - - for (i = 0; i < ks->mcast_lst_size; i++) { - position = (ether_gen_crc(6, ks->mcast_lst[i]) >> 26) & 0x3f; - index = position >> 3; - value = 1 << (position & 7); - ks->mcast_bits[index] |= (u8)value; - } - - for (i = 0; i < HW_MCAST_SIZE; i++) { - if (i & 1) { - ks_wrreg16(ks, (u16)((KS_MAHTR0 + i) & ~1), - (ks->mcast_bits[i] << 8) | - ks->mcast_bits[i - 1]); - } - } -} /* ks_set_grpaddr */ - -/** -* ks_clear_mcast - clear multicast information -* -* @ks : The chip information -* This routine removes all mcast addresses set in the hardware. -*/ - -static void ks_clear_mcast(struct ks_net *ks) -{ - u16 i, mcast_size; - for (i = 0; i < HW_MCAST_SIZE; i++) - ks->mcast_bits[i] = 0; - - mcast_size = HW_MCAST_SIZE >> 2; - for (i = 0; i < mcast_size; i++) - ks_wrreg16(ks, KS_MAHTR0 + (2*i), 0); -} - -static void ks_set_promis(struct ks_net *ks, u16 promiscuous_mode) -{ - u16 cntl; - ks->promiscuous = promiscuous_mode; - ks_stop_rx(ks); /* Stop receiving for reconfiguration */ - cntl = ks_rdreg16(ks, KS_RXCR1); - - cntl &= ~RXCR1_FILTER_MASK; - if (promiscuous_mode) - /* Enable Promiscuous mode */ - cntl |= RXCR1_RXAE | RXCR1_RXINVF; - else - /* Disable Promiscuous mode (default normal mode) */ - cntl |= RXCR1_RXPAFMA; - - ks_wrreg16(ks, KS_RXCR1, cntl); - - if (ks->enabled) - ks_start_rx(ks); - -} /* ks_set_promis */ - -static void ks_set_mcast(struct ks_net *ks, u16 mcast) -{ - u16 cntl; - - ks->all_mcast = mcast; - ks_stop_rx(ks); /* Stop receiving for reconfiguration */ - cntl = ks_rdreg16(ks, KS_RXCR1); - cntl &= ~RXCR1_FILTER_MASK; - if (mcast) - /* Enable "Perfect with Multicast address passed mode" */ - cntl |= (RXCR1_RXAE | RXCR1_RXMAFMA | RXCR1_RXPAFMA); - else - /** - * Disable "Perfect with Multicast address passed - * mode" (normal mode). - */ - cntl |= RXCR1_RXPAFMA; - - ks_wrreg16(ks, KS_RXCR1, cntl); - - if (ks->enabled) - ks_start_rx(ks); -} /* ks_set_mcast */ - -static void ks_set_rx_mode(struct net_device *netdev) -{ - struct ks_net *ks = netdev_priv(netdev); - struct netdev_hw_addr *ha; - - /* Turn on/off promiscuous mode. */ - if ((netdev->flags & IFF_PROMISC) == IFF_PROMISC) - ks_set_promis(ks, - (u16)((netdev->flags & IFF_PROMISC) == IFF_PROMISC)); - /* Turn on/off all mcast mode. */ - else if ((netdev->flags & IFF_ALLMULTI) == IFF_ALLMULTI) - ks_set_mcast(ks, - (u16)((netdev->flags & IFF_ALLMULTI) == IFF_ALLMULTI)); - else - ks_set_promis(ks, false); - - if ((netdev->flags & IFF_MULTICAST) && netdev_mc_count(netdev)) { - if (netdev_mc_count(netdev) <= MAX_MCAST_LST) { - int i = 0; - - netdev_for_each_mc_addr(ha, netdev) { - if (i >= MAX_MCAST_LST) - break; - memcpy(ks->mcast_lst[i++], ha->addr, ETH_ALEN); - } - ks->mcast_lst_size = (u8)i; - ks_set_grpaddr(ks); - } else { - /** - * List too big to support so - * turn on all mcast mode. - */ - ks->mcast_lst_size = MAX_MCAST_LST; - ks_set_mcast(ks, true); - } - } else { - ks->mcast_lst_size = 0; - ks_clear_mcast(ks); - } -} /* ks_set_rx_mode */ - -static void ks_set_mac(struct ks_net *ks, u8 *data) -{ - u16 *pw = (u16 *)data; - u16 w, u; - - ks_stop_rx(ks); /* Stop receiving for reconfiguration */ - - u = *pw++; - w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF); - ks_wrreg16(ks, KS_MARH, w); - - u = *pw++; - w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF); - ks_wrreg16(ks, KS_MARM, w); - - u = *pw; - w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF); - ks_wrreg16(ks, KS_MARL, w); - - memcpy(ks->mac_addr, data, ETH_ALEN); - - if (ks->enabled) - ks_start_rx(ks); -} - -static int ks_set_mac_address(struct net_device *netdev, void *paddr) -{ - struct ks_net *ks = netdev_priv(netdev); - struct sockaddr *addr = paddr; - u8 *da; - - memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); - - da = (u8 *)netdev->dev_addr; - - ks_set_mac(ks, da); - return 0; -} - -static int ks_net_ioctl(struct net_device *netdev, struct ifreq *req, int cmd) -{ - struct ks_net *ks = netdev_priv(netdev); - - if (!netif_running(netdev)) - return -EINVAL; - - return generic_mii_ioctl(&ks->mii, if_mii(req), cmd, NULL); -} - -static const struct net_device_ops ks_netdev_ops = { - .ndo_open = ks_net_open, - .ndo_stop = ks_net_stop, - .ndo_do_ioctl = ks_net_ioctl, - .ndo_start_xmit = ks_start_xmit, - .ndo_set_mac_address = ks_set_mac_address, - .ndo_set_rx_mode = ks_set_rx_mode, - .ndo_validate_addr = eth_validate_addr, -}; - -/* ethtool support */ - -static void ks_get_drvinfo(struct net_device *netdev, - struct ethtool_drvinfo *di) -{ - strlcpy(di->driver, DRV_NAME, sizeof(di->driver)); - strlcpy(di->version, "1.00", sizeof(di->version)); - strlcpy(di->bus_info, dev_name(netdev->dev.parent), - sizeof(di->bus_info)); -} - -static u32 ks_get_msglevel(struct net_device *netdev) -{ - struct ks_net *ks = netdev_priv(netdev); - return ks->msg_enable; -} - -static void ks_set_msglevel(struct net_device *netdev, u32 to) -{ - struct ks_net *ks = netdev_priv(netdev); - ks->msg_enable = to; -} - -static int ks_get_link_ksettings(struct net_device *netdev, - struct ethtool_link_ksettings *cmd) -{ - struct ks_net *ks = netdev_priv(netdev); - - mii_ethtool_get_link_ksettings(&ks->mii, cmd); - - return 0; -} - -static int ks_set_link_ksettings(struct net_device *netdev, - const struct ethtool_link_ksettings *cmd) -{ - struct ks_net *ks = netdev_priv(netdev); - return mii_ethtool_set_link_ksettings(&ks->mii, cmd); -} - -static u32 ks_get_link(struct net_device *netdev) -{ - struct ks_net *ks = netdev_priv(netdev); - return mii_link_ok(&ks->mii); -} - -static int ks_nway_reset(struct net_device *netdev) -{ - struct ks_net *ks = netdev_priv(netdev); - return mii_nway_restart(&ks->mii); -} - -static const struct ethtool_ops ks_ethtool_ops = { - .get_drvinfo = ks_get_drvinfo, - .get_msglevel = ks_get_msglevel, - .set_msglevel = ks_set_msglevel, - .get_link = ks_get_link, - .nway_reset = ks_nway_reset, - .get_link_ksettings = ks_get_link_ksettings, - .set_link_ksettings = ks_set_link_ksettings, -}; - -/* MII interface controls */ - -/** - * ks_phy_reg - convert MII register into a KS8851 register - * @reg: MII register number. - * - * Return the KS8851 register number for the corresponding MII PHY register - * if possible. Return zero if the MII register has no direct mapping to the - * KS8851 register set. - */ -static int ks_phy_reg(int reg) -{ - switch (reg) { - case MII_BMCR: - return KS_P1MBCR; - case MII_BMSR: - return KS_P1MBSR; - case MII_PHYSID1: - return KS_PHY1ILR; - case MII_PHYSID2: - return KS_PHY1IHR; - case MII_ADVERTISE: - return KS_P1ANAR; - case MII_LPA: - return KS_P1ANLPR; - } - - return 0x0; -} - -/** - * ks_phy_read - MII interface PHY register read. - * @netdev: The network device the PHY is on. - * @phy_addr: Address of PHY (ignored as we only have one) - * @reg: The register to read. - * - * This call reads data from the PHY register specified in @reg. Since the - * device does not support all the MII registers, the non-existent values - * are always returned as zero. - * - * We return zero for unsupported registers as the MII code does not check - * the value returned for any error status, and simply returns it to the - * caller. The mii-tool that the driver was tested with takes any -ve error - * as real PHY capabilities, thus displaying incorrect data to the user. - */ -static int ks_phy_read(struct net_device *netdev, int phy_addr, int reg) -{ - struct ks_net *ks = netdev_priv(netdev); - int ksreg; - int result; - - ksreg = ks_phy_reg(reg); - if (!ksreg) - return 0x0; /* no error return allowed, so use zero */ - - mutex_lock(&ks->lock); - result = ks_rdreg16(ks, ksreg); - mutex_unlock(&ks->lock); - - return result; -} - -static void ks_phy_write(struct net_device *netdev, - int phy, int reg, int value) -{ - struct ks_net *ks = netdev_priv(netdev); - int ksreg; - - ksreg = ks_phy_reg(reg); - if (ksreg) { - mutex_lock(&ks->lock); - ks_wrreg16(ks, ksreg, value); - mutex_unlock(&ks->lock); - } -} - -/** - * ks_read_selftest - read the selftest memory info. - * @ks: The device state - * - * Read and check the TX/RX memory selftest information. - */ -static int ks_read_selftest(struct ks_net *ks) -{ - unsigned both_done = MBIR_TXMBF | MBIR_RXMBF; - int ret = 0; - unsigned rd; - - rd = ks_rdreg16(ks, KS_MBIR); - - if ((rd & both_done) != both_done) { - netdev_warn(ks->netdev, "Memory selftest not finished\n"); - return 0; - } - - if (rd & MBIR_TXMBFA) { - netdev_err(ks->netdev, "TX memory selftest fails\n"); - ret |= 1; - } - - if (rd & MBIR_RXMBFA) { - netdev_err(ks->netdev, "RX memory selftest fails\n"); - ret |= 2; - } - - netdev_info(ks->netdev, "the selftest passes\n"); - return ret; -} - -static void ks_setup(struct ks_net *ks) -{ - u16 w; - - /** - * Configure QMU Transmit - */ - - /* Setup Transmit Frame Data Pointer Auto-Increment (TXFDPR) */ - ks_wrreg16(ks, KS_TXFDPR, TXFDPR_TXFPAI); - - /* Setup Receive Frame Data Pointer Auto-Increment */ - ks_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI); - - /* Setup Receive Frame Threshold - 1 frame (RXFCTFC) */ - ks_wrreg16(ks, KS_RXFCTR, 1 & RXFCTR_RXFCT_MASK); - - /* Setup RxQ Command Control (RXQCR) */ - ks->rc_rxqcr = RXQCR_CMD_CNTL; - ks_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr); - - /** - * set the force mode to half duplex, default is full duplex - * because if the auto-negotiation fails, most switch uses - * half-duplex. - */ - - w = ks_rdreg16(ks, KS_P1MBCR); - w &= ~BMCR_FULLDPLX; - ks_wrreg16(ks, KS_P1MBCR, w); - - w = TXCR_TXFCE | TXCR_TXPE | TXCR_TXCRC | TXCR_TCGIP; - ks_wrreg16(ks, KS_TXCR, w); - - w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE | RXCR1_RXME | RXCR1_RXIPFCC; - - if (ks->promiscuous) /* bPromiscuous */ - w |= (RXCR1_RXAE | RXCR1_RXINVF); - else if (ks->all_mcast) /* Multicast address passed mode */ - w |= (RXCR1_RXAE | RXCR1_RXMAFMA | RXCR1_RXPAFMA); - else /* Normal mode */ - w |= RXCR1_RXPAFMA; - - ks_wrreg16(ks, KS_RXCR1, w); -} /*ks_setup */ - - -static void ks_setup_int(struct ks_net *ks) -{ - ks->rc_ier = 0x00; - /* Clear the interrupts status of the hardware. */ - ks_wrreg16(ks, KS_ISR, 0xffff); - - /* Enables the interrupts of the hardware. */ - ks->rc_ier = (IRQ_LCI | IRQ_TXI | IRQ_RXI); -} /* ks_setup_int */ - -static int ks_hw_init(struct ks_net *ks) -{ -#define MHEADER_SIZE (sizeof(struct type_frame_head) * MAX_RECV_FRAMES) - ks->promiscuous = 0; - ks->all_mcast = 0; - ks->mcast_lst_size = 0; - - ks->frame_head_info = devm_kmalloc(&ks->pdev->dev, MHEADER_SIZE, - GFP_KERNEL); - if (!ks->frame_head_info) - return false; - - ks_set_mac(ks, KS_DEFAULT_MAC_ADDRESS); - return true; -} - -#if defined(CONFIG_OF) -static const struct of_device_id ks8851_ml_dt_ids[] = { - { .compatible = "micrel,ks8851-mll" }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, ks8851_ml_dt_ids); -#endif - -static int ks8851_probe(struct platform_device *pdev) -{ - int err; - struct net_device *netdev; - struct ks_net *ks; - u16 id, data; - const char *mac; - - netdev = alloc_etherdev(sizeof(struct ks_net)); - if (!netdev) - return -ENOMEM; - - SET_NETDEV_DEV(netdev, &pdev->dev); - - ks = netdev_priv(netdev); - ks->netdev = netdev; - - ks->hw_addr = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(ks->hw_addr)) { - err = PTR_ERR(ks->hw_addr); - goto err_free; - } - - ks->hw_addr_cmd = devm_platform_ioremap_resource(pdev, 1); - if (IS_ERR(ks->hw_addr_cmd)) { - err = PTR_ERR(ks->hw_addr_cmd); - goto err_free; - } - - err = ks_check_endian(ks); - if (err) - goto err_free; - - netdev->irq = platform_get_irq(pdev, 0); - - if ((int)netdev->irq < 0) { - err = netdev->irq; - goto err_free; - } - - ks->pdev = pdev; - - mutex_init(&ks->lock); - spin_lock_init(&ks->statelock); - - netdev->netdev_ops = &ks_netdev_ops; - netdev->ethtool_ops = &ks_ethtool_ops; - - /* setup mii state */ - ks->mii.dev = netdev; - ks->mii.phy_id = 1, - ks->mii.phy_id_mask = 1; - ks->mii.reg_num_mask = 0xf; - ks->mii.mdio_read = ks_phy_read; - ks->mii.mdio_write = ks_phy_write; - - netdev_info(netdev, "message enable is %d\n", msg_enable); - /* set the default message enable */ - ks->msg_enable = netif_msg_init(msg_enable, (NETIF_MSG_DRV | - NETIF_MSG_PROBE | - NETIF_MSG_LINK)); - ks_read_config(ks); - - /* simple check for a valid chip being connected to the bus */ - if ((ks_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) { - netdev_err(netdev, "failed to read device ID\n"); - err = -ENODEV; - goto err_free; - } - - if (ks_read_selftest(ks)) { - netdev_err(netdev, "failed to read device ID\n"); - err = -ENODEV; - goto err_free; - } - - err = register_netdev(netdev); - if (err) - goto err_free; - - platform_set_drvdata(pdev, netdev); - - ks_soft_reset(ks, GRR_GSR); - ks_hw_init(ks); - ks_disable_qmu(ks); - ks_setup(ks); - ks_setup_int(ks); - - data = ks_rdreg16(ks, KS_OBCR); - ks_wrreg16(ks, KS_OBCR, data | OBCR_ODS_16mA); - - /* overwriting the default MAC address */ - if (pdev->dev.of_node) { - mac = of_get_mac_address(pdev->dev.of_node); - if (!IS_ERR(mac)) - ether_addr_copy(ks->mac_addr, mac); - } else { - struct ks8851_mll_platform_data *pdata; - - pdata = dev_get_platdata(&pdev->dev); - if (!pdata) { - netdev_err(netdev, "No platform data\n"); - err = -ENODEV; - goto err_pdata; - } - memcpy(ks->mac_addr, pdata->mac_addr, ETH_ALEN); - } - if (!is_valid_ether_addr(ks->mac_addr)) { - /* Use random MAC address if none passed */ - eth_random_addr(ks->mac_addr); - netdev_info(netdev, "Using random mac address\n"); - } - netdev_info(netdev, "Mac address is: %pM\n", ks->mac_addr); - - memcpy(netdev->dev_addr, ks->mac_addr, ETH_ALEN); - - ks_set_mac(ks, netdev->dev_addr); - - id = ks_rdreg16(ks, KS_CIDER); - - netdev_info(netdev, "Found chip, family: 0x%x, id: 0x%x, rev: 0x%x\n", - (id >> 8) & 0xff, (id >> 4) & 0xf, (id >> 1) & 0x7); - return 0; - -err_pdata: - unregister_netdev(netdev); -err_free: - free_netdev(netdev); - return err; -} - -static int ks8851_remove(struct platform_device *pdev) -{ - struct net_device *netdev = platform_get_drvdata(pdev); - - unregister_netdev(netdev); - free_netdev(netdev); - return 0; - -} - -static struct platform_driver ks8851_platform_driver = { - .driver = { - .name = DRV_NAME, - .of_match_table = of_match_ptr(ks8851_ml_dt_ids), - }, - .probe = ks8851_probe, - .remove = ks8851_remove, -}; - -module_platform_driver(ks8851_platform_driver); - -MODULE_DESCRIPTION("KS8851 MLL Network driver"); -MODULE_AUTHOR("David Choi "); -MODULE_LICENSE("GPL"); -module_param_named(message, msg_enable, int, 0); -MODULE_PARM_DESC(message, "Message verbosity level (0=none, 31=all)"); -