diff mbox series

[v2] e1000e: continue to init phy even when failed to disable ULP

Message ID 20200617111249.20855-1-aaron.ma@canonical.com
State New
Headers show
Series [v2] e1000e: continue to init phy even when failed to disable ULP | expand

Commit Message

Aaron Ma June 17, 2020, 11:12 a.m. UTC
After commit: e086ba2fccd ("e1000e: disable s0ix entry and exit flows
 for ME systems").
ThinkPad P14s always failed to disable ULP by ME.
commit: 0c80cdbf33 ("e1000e: Warn if disabling ULP failed")
break out of init phy:

error log:
[   42.364753] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP
[   42.524626] e1000e 0000:00:1f.6 enp0s31f6: PHY Wakeup cause - Unicast Packet
[   42.822476] e1000e 0000:00:1f.6 enp0s31f6: Hardware Error

When disable s0ix, E1000_FWSM_ULP_CFG_DONE will never be 1.
If continue to init phy like before, it can work as before.
iperf test result good too.

Fixes: 0c80cdbf33 ("e1000e: Warn if disabling ULP failed")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
 drivers/net/ethernet/intel/e1000e/ich8lan.c | 1 -
 1 file changed, 1 deletion(-)
diff mbox series


diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index f999cca37a8a..be7475c5529d 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -303,7 +303,6 @@  static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 	ret_val = e1000_disable_ulp_lpt_lp(hw, true);
 	if (ret_val) {
 		e_warn("Failed to disable ULP\n");
-		goto out;
 	ret_val = hw->phy.ops.acquire(hw);