diff mbox series

[net-next,v5,13/15] phylink: introduce phylink_fwnode_phy_connect()

Message ID 20210208151244.16338-14-calvin.johnson@oss.nxp.com
State Superseded
Headers show
Series ACPI support for dpaa2 driver | expand

Commit Message

Calvin Johnson Feb. 8, 2021, 3:12 p.m. UTC 
Define phylink_fwnode_phy_connect() to connect phy specified by
a fwnode to a phylink instance.

Signed-off-by: Calvin Johnson <calvin.johnson@oss.nxp.com>
---

Changes in v5: None
Changes in v4:
- call phy_device_free() before returning

Changes in v3: None
Changes in v2: None

 drivers/net/phy/phylink.c | 56 +++++++++++++++++++++++++++++++++++++++
 include/linux/phylink.h   |  3 +++
 2 files changed, 59 insertions(+)

Comments

Calvin Johnson Feb. 15, 2021, 6:01 a.m. UTC | #1 
On Mon, Feb 08, 2021 at 03:31:11PM +0000, Russell King - ARM Linux admin wrote:
> On Mon, Feb 08, 2021 at 08:42:42PM +0530, Calvin Johnson wrote:
> > +int phylink_fwnode_phy_connect(struct phylink *pl,
> > +			       struct fwnode_handle *fwnode,
> > +			       u32 flags)
> > +{
> > +	struct fwnode_handle *phy_fwnode;
> > +	struct phy_device *phy_dev;
> > +	int ret;
> > +
> > +	if (is_of_node(fwnode)) {
> > +		/* Fixed links and 802.3z are handled without needing a PHY */
> > +		if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
> > +		    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
> > +		     phy_interface_mode_is_8023z(pl->link_interface)))
> > +			return 0;
> 
> This difference between ACPI and DT really needs to be described in the
> commit description.
> 
> For example, why is it acceptable to have a PHY in fixed-link mode if
> we're using ACPI, and not DT?
> 
> If we look at the phylink code, accepting a PHY when in fixed-link mode
> is basically not supported... so why should ACPI allow this?

DT and ACPI should handle fixed-link in similar manner. I'll remove the OF
check.

Thanks
Calvin
diff mbox series

Patch

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 84f6e197f965..5466e1e6272a 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -5,6 +5,7 @@ 
  *
  * Copyright (C) 2015 Russell King
  */
+#include <linux/acpi.h>
 #include <linux/ethtool.h>
 #include <linux/export.h>
 #include <linux/gpio/consumer.h>
@@ -1120,6 +1121,61 @@  int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn,
 }
 EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
 
+/**
+ * phylink_fwnode_phy_connect() - connect the PHY specified in the fwnode.
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @fwnode: a pointer to a &struct fwnode_handle.
+ * @flags: PHY-specific flags to communicate to the PHY device driver
+ *
+ * Connect the phy specified @fwnode to the phylink instance specified
+ * by @pl.
+ *
+ * Returns 0 on success or a negative errno.
+ */
+int phylink_fwnode_phy_connect(struct phylink *pl,
+			       struct fwnode_handle *fwnode,
+			       u32 flags)
+{
+	struct fwnode_handle *phy_fwnode;
+	struct phy_device *phy_dev;
+	int ret;
+
+	if (is_of_node(fwnode)) {
+		/* Fixed links and 802.3z are handled without needing a PHY */
+		if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
+		    (pl->cfg_link_an_mode == MLO_AN_INBAND &&
+		     phy_interface_mode_is_8023z(pl->link_interface)))
+			return 0;
+	}
+
+	phy_fwnode = fwnode_get_phy_node(fwnode);
+	if (IS_ERR(phy_fwnode)) {
+		if (pl->cfg_link_an_mode == MLO_AN_PHY)
+			return -ENODEV;
+		return 0;
+	}
+
+	phy_dev = fwnode_phy_find_device(phy_fwnode);
+	/* We're done with the phy_node handle */
+	fwnode_handle_put(phy_fwnode);
+	if (!phy_dev)
+		return -ENODEV;
+
+	ret = phy_attach_direct(pl->netdev, phy_dev, flags,
+				pl->link_interface);
+	if (ret) {
+		phy_device_free(phy_dev);
+		return ret;
+	}
+
+	ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
+	if (ret)
+		phy_detach(phy_dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_fwnode_phy_connect);
+
 /**
  * phylink_disconnect_phy() - disconnect any PHY attached to the phylink
  *   instance.
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index d81a714cfbbd..75d4f99090fd 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -439,6 +439,9 @@  void phylink_destroy(struct phylink *);
 
 int phylink_connect_phy(struct phylink *, struct phy_device *);
 int phylink_of_phy_connect(struct phylink *, struct device_node *, u32 flags);
+int phylink_fwnode_phy_connect(struct phylink *pl,
+			       struct fwnode_handle *fwnode,
+			       u32 flags);
 void phylink_disconnect_phy(struct phylink *);
 
 void phylink_mac_change(struct phylink *, bool up);